Jobs at Halliburton

TU12-ESG-Tech Prof-GBA, Assoc (Neuquen, Q, AR, 8300)

Job Duties

Under direct supervison, provides specific multi-PSL job design, well support, and post job analysis to customers in a designated area. Develops and maintains personal relationships with the technical customer base and provides highly technical support. May go on critical jobs where service quality or job complexity could be an issue. May maintain job schedules and liaise with customers on technical issues including performance review and process improvements to better support the needs of the customer. May work with the local Business Development personnel to insure customers are kept current on technology. May initiate, review, and close Correction, Prevention, Improvement (CPI)s pertaining to Technology. Skills are typically acquired through completion on an undergraduate degree in Engineering and/or related field. Certification as a Professional Engineer preferred. This is an entry level position in a service center.

Qualifications

Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200358
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Delivery Driver (I-III) - MultiChem - 198761 (Dilley, TX, US, 78017)

Job Duties

Under general supervision, the Delivery Truck Driver I loads the truck and delivers chemicals to the customer location in a safe manner following all laws, company policies, and customer policies.
Ensures that the truck is in good working order by completing the pre-trip inspection, ensures that the logs and timesheets are up-to-date and that the shipping documents and all vehicle documents are current and in the truck.
After arriving to the location, the driver unloads the truck by dropping off drums or pumping chemical off of the truck into bulk tanks.
After completing all of the deliveries, the driver will do a post trip inspection and remove any empty containers from the delivery truck so that chemicals can be loaded for the next day.
May perform minor maintenance to truck and will keep truck clean and washed.
Driver is responsible for forklift operations/ensuring that the load is secured and ensuring that the bills of lading and shipping documents are documented properly.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications

Completion of high school or equivalent education required
Class A Commercial licensure with Hazmat endorsements prior to hiring
Minimum of 6 months of experience in DOT Hazmat driving position is required
Must pass Homeland Security background check.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Delivery Driver I, Delivery Driver II, or Delivery Driver III.

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

101 Klopek Rd, Dilley, Texas, 78017, United States

Job Details

Requisition Number: 198761
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Please be aware that a portion of this product service line is being marketed for sale by Halliburton. Employees in this position when such sale is complete may transfer employment to the purchaser upon or following the closing of any such sale. You acknowledge that Halliburton may collect, process, and share certain personal data during the hiring process with a prospective buyer to the extent that would reasonably allow a buyer to evaluate your contribution to the operations and future role within the organization. For more information on Halliburton’s data privacy practices, please see the Halliburton Privacy Notice.

Field Professional-Senior Field Professional - Logging & Perforating (Cased Hole) - 197934 (Victoria, TX, US, 77905-5555)

Job Duties

Under general supervision, applies knowledge of Halliburton Cased Hole Wireline Technologies to independently provide basic services and tool operation to customers at the well site.
Applies engineering, mechanical and geological principles to articulate basic data interpretations and mechanical constructs to clients from proprietary software and learns to coach clients through various drilling and completion scenarios.
Actively participates in the training and development of operators and Associate Field Professionals on all aspects of job.

Qualifications

High school diploma or equivalent (GED) required
Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 1 year of experience in Cased Hole Wireline field operations required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Field Professional or Senior Field Professional - Logging and Perforating (Cased Hole)

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

101 Holt Rd, Victoria, Texas, 77905-5555, United States

Job Details

Requisition Number: 197934
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional - Senior Technical Professional - ROCC (Houston, TX, US, 77032)

Job Duties and Qualifications

Under general supervision, remotely supports operational use of technology, software, and equipment. Has a superior knowledge of Halliburton's most up-to-date software packages and can troubleshoot remotely.
Audits software usage and Product Service Line's (PSL) current initiatives used by the field crew.
Provides data analytics to Region and PSL management and project teams.
Works closely with PSL Technology and other DevOps groups to provide continuous feedback.
Assignments require proficient skills and knowledge in PSL Operations and current PSL software.
Ensures continuous improvement through the identification and sharing of feedback from previous jobs, maintenance of the call log, and training improvements.

Requirements:

Must be able to work in a group office setting.
Requires a bachelor's degree in a STEM discipline, and a minimum of 2 years of experience in PE operations/engineering.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 196835
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronic Technician I (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location
Performs function testing to verify equipment readiness after maintenance
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints
Performs work within a variety of Halliburton specific software and hardware
Must possess advanced computer literacy
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities
Performs own work and assists others as directed
Responsible for ensuring duties are performed in a safe, efficient, and effective manner
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
A high school diploma or equivalent and 1 year of experience in an electrical field are required
A Technical Certification is preferred

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 199566
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronic Technician I (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location
Performs function testing to verify equipment readiness after maintenance
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints
Performs work within a variety of Halliburton specific software and hardware
Must possess advanced computer literacy. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities
Performs own work and assists others as directed. Responsible for ensuring duties are performed in a safe, efficient, and effective manner
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
A high school diploma or equivalent and 1 year of experience in an electrical field are required
A Technical Certification is preferred

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 199390
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician I (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location
Performs function testing to verify equipment readiness after maintenance
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities
Performs own work and assists others as directed
Responsible for ensuring duties are performed in a safe, efficient, and effective manner
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined
A high school diploma or equivalent and one year of experience in a mechanical field is required
A technical school certificate is preferred

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 199382
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician I (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location
Performs function testing to verify equipment readiness after maintenance
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities
Performs own work and assists others as directed
Responsible for ensuring duties are performed in a safe, efficient, and effective manner
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
A high school diploma or equivalent and one year of experience in a mechanical field is required
A technical school certificate is preferred

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 199389
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

FIELD Professional Logging & Perforating (Associate to Senior) Wireline and Perforating (TX, US, 79763)

Please Note:
This posting is intended to collect candidate information for Halliburton’s talent pool, and is not considered an application. By completing the candidate profile, recruiters will have visibility to your information in order to contact you for a future related job opportunity. In addition to providing your information on this posting, we encourage you to create a Job Alert within our career site. The Job Alert allows you to select search criteria for positions that match your interest(s). Once positions are posted that match your search criteria, you will receive an email notification.

Responsibilities:

Under direct supervision, assists in the preparation and execution of Cased Hole logging services on location in accordance with HMS.
This is the entry level position for this discipline and will train directly under the supervision of an appropriate frontline leader or a competent Field Professional assigned by the frontline leader to gain knowledge of operations.
Assists in checking equipment prior to and after logging operations.
Gains familiarity with Surface System and Cased Hole tools through field work under mentorship.
Promotes and ensures compliance with Health, Safety and Environment (HSE) and Service Quality (SQ) standards, practices and guidelines.

Requirements:

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Candidates with qualifications exceeding the minimum job requirements will be considered for higher-level positions based on their experience, additional job requirements, and current business needs. Depending on their education, experience, and skill level, candidates may be eligible for a range of job opportunities, including positions ranging from Associate Field Professional, Field Professional, Field Professional Sr. to General Field Professional.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 193955
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
PSL: [[division_obj]]
Full Time / Part Time: Full Time

Consultant (Mumbai, MH, IN, 400093)

Job Duties and Qualifications

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience. Working with customers, demonstrates knowledge of existing and emerging technology and product areas. Communicates to individual clients how the use of technology solutions allow them to be more productive. Is able to articulate and apply solution for assignment delivery. As an individual contributes to project teams. Effectively plans and manages own workload to meet desired service level targets. Maintains a consistent client-focused approach with clients and/or individuals. Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 3 years of experience.

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 197011
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician I (Mumbai, KA, IN, 400057)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location. Performs function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton&aposs system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Performs own work and assists others as directed. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. A high school diploma or equivalent and one year of experience in a mechanical field is required. A technical school certificate is preferred.

Qualifications

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 198012
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronic Technician I (Mumbai, MH, IN, 400057)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location. Performs function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints. Performs work within a variety of Halliburton specific software and hardware. Must possess advanced computer literacy. Ensures adherence, accurate input, and maintenance of data into Halliburton&aposs system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Performs own work and assists others as directed. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. A high school diploma or equivalent and 1 year of experience in an electrical field are required. A Technical Certification is preferred.

Qualifications

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 198032
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Planner (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Under general supervision, creates, updates, and maintains SAP sales orders for Product Service Line (PSL) Service Coordinator.
Focuses on minimizing sales order day sales outstanding. Support the Service Coordinators through specific processing of order to cash, plant maintenance and procurement data entry.
Responsible for daily inventory commitment and reconciliation.
Troubleshoots & resolves SAP order to cash issues. Work with resource planners in maintaining accuracy of scheduling board and the dispatching of jobs in SAP.
Work with resource planners, plant maintenance, and accounting teams to resolve scheduling issues.
Creates requisitions as required and supports processing and transfer of cost to a sales orders or MBU.
Creates standing maintenance orders to assign sundry item cost to mobile business unit (MBU).
Skills are typically acquired through a high school diploma or similar education and 2 years experience in PSL.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.
Thoroughly incorporate all necessary documentation into sales orders
Manage incoming service requests in a timely, efficient, and effective way
Monitor all open requests, ensuring the prompt delivery of service to meet our contractual terms and conditions
Maintain effective and timely communication with PSL and obtain regular progress updates for outstanding work

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 199532
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Consultant - IMPT (Gurgaon, HR, IN, 122018)

Job Duties and Qualifications

Job Summary :

We are seeking a highly skilled and experienced Technical Consultant for our Information Management & Platform Solutions to join the team. The Application Administrator will be responsible for the configuration, maintenance, support, and optimization of data management applications at Halliburton. This role ensures that applications run efficiently and securely while supporting business processes and user needs.

Responsibilities :

• Install, configure, and maintain enterprise applications (on-premises and public/private/hybrid cloud-based).
• Monitor application performance and troubleshoot issues to ensure high availability and responsiveness.
• Manage application user access, permissions, and roles in alignment with IT security policies.
• Coordinate upgrades and patches, ensuring minimal disruption to business operations.
• Collaborate with vendors, IT teams, and business units for implementation, support, and improvements.
• Create and maintain technical documentation and user guides.
• Support incident, problem, and change management processes related to applications.
• Ensure compliance with licensing, data protection, and audit standards.

Knowledge, Skills, and Abilities

Required Skills :

• Strong understanding of application lifecycle management.
• Experience with application servers, databases (e.g., SQL Server, Oracle), and web technologies.
• Proficiency in scripting or automation (PowerShell, Bash, Python, etc.) will be preferred.
• Knowledge of ITIL practices is a plus.
• Familiarity with monitoring and logging tools.
• Good problem-solving, analytical, and communication skills.
• Ability to work independently and in a team.
• Preferred to have experience with cloud platforms like AWS and/or Azure.

Qualifications:

• Bachelor’s (MCA/B.Tech) degree in Computer Science/ Computer Engineering/ Information Technology.
• Minimum 5 years of experience in application administration.
• Preferred to have Microsoft/AWS cloud administrator certification.

Location

2nd Floor, Worldmark 3,, Gurgaon, Haryana, 122018, India

Job Details

Requisition Number: 197012
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Accountant (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under general supervision, applies knowledge of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input.
Prepares and posts journal vouchers for complex accounting transactions.
Reviews and monitors financial transactions for accuracy and timeliness.
Researches and resolves complex accounting issues and transactions including related internal controls.
Prepares, analyzes, and distributes financial results including variance explanations.
Participates in multi-functional teams and develops project management skills.
Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen.
Minimum of three (3) years of experience in accounting related roles required.
Requires completion of an undergraduate degree in accounting, business, or related field.
Knowledge of US GAAP or country-specific accounting principles required.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 198790
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Principal Accountant (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under general supervision, assists in the development of the company's business systems, processes, and controls, including policies and procedures, relative to the location and department assigned.
Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs, researches, and resolves activities involving complex accounting reports with associated accounting analysis and related internal controls.
May prepare and post or review journal vouchers for accounting transactions.
Reviews and monitors financial transactions for accuracy and timeliness.
Prepares, analyzes and distributes financial results including variance explanations.
Interacts and communicates with other departments and business units to resolve financial related issues.
Coordinates financial report preparation and business analysis.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of five (5) years of experience in accounting related roles.
Knowledge of US GAAP or country-specific accounting principles required.
Demonstrates project management skills and knowledge of financial performance metrics such as CVA/NOVA.
Demonstrates knowledge in aspects of general accounting, internal controls and risk mitigation, company policy, financial analysis and statutory reporting, forecasting, and financial applications of varying complexity, as well as advanced levels of proficiency with industry and company acumen.
This is a developmental role for learning basic supervisory skills/experience.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 198832
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Firmware/Software Engineering Intern (Singapore, 05, SG, 639940)

Job Duties

Firmware/Software Engineering Intern candidate will work under the supervision of experience engineers as a team executing the tasks assigned

The technology team works closely with Electrical engineers to ensure product meets specifications and schedule

Essential Duties and Responsibilities include the following:

Provide support to the Firmware/Software Engineers in programming tasks such as engineering analysis and test, and support of proof-of-concept or system testing
Undertake writing, debugging, optimizing, testing, porting, and documenting embedded codes
Define, develop, and implement Firmware and Firmware validation test plans and test content with deep comprehension of Firmware algorithms and product specifications
Acquire, analyse and process data from different sensors. Implement algorithms and software application

Benefits:

Be part of a team and participant in the lifecycle process of a product from concept to commercialization
Experience in developing embedded solutions and software applications with C/C++ programming language
Work with many cross-functional teams including program managers, hardware engineers, software engineers and mechanical engineers
Be part of a dynamic R&D team delivering quality product.

Requirements

Degree/Master’s students, preferably from Digital Signal Processing / Embedded system / Computer science or similar disciplines
Well-versed in Matlab/Simulink, C, C++/ C# and / or Python
Conceptual knowledge of digital signal processing topics such as IIR / FIR filters, DFT, time-frequency analysis, transforms, adaptive signal processing, array signal processing, signal conditioning, denosing, channel estimation and equalization etc
Hands on experience in machine learning / Artificial Intelligence, pattern recognition, classification and neural networks
Good data analysis and interpretation skills
Self-motivated and a commitment of minimum 6 months.

Qualifications

Location

315 Jalan Ahmad Ibrahim, Singapore, Singapore, 639940, Singapore

Job Details

Requisition Number: 198610
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer, Associate (Singapore, 05, SG, 637131)

Job Duties

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development
Assists in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards
Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200330
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Feira de Talentos Técnicos - Supervisor de Operações (BA, BR)

Procuramos as pessoas certas - pessoas que queiram inovar, crescer e liderar. Atraímos e retemos os melhores talentos, investindo em nossos funcionários e capacitando-os para que se desenvolvam e desenvolvam suas carreiras. Esta oportunidade também está disponível para pessoas com deficiências (PCD’s).

Experiência Profissional:
- Experiência anterior na função de supervisor
Formação:
- Ensino técnico completo em uma das seguintes áreas:
- Técnico em Mecânica;
- Técnico em Eletromecânica;
- Técnico em Eletrônica;
- Ou outros cursos técnicos relacionados;
Certificações Necessárias:
- Registro ativo e regular no CFT;
Habilitação:
- CNH Categoria E;
Habilidades Técnicas:
- Conhecimento de pacote Office;

Responsabilidades:

Supervisionar equipes técnicas em campo, garantindo o cumprimento de prazos e padrões de qualidade;
Gerir atividades de manutenção, montagem e operação de equipamentos técnicos;
Garantir a segurança e o desempenho eficiente das equipes em todas as operações;
Apoiar no desenvolvimento técnico dos subordinados por meio de treinamentos e orientações práticas;
Gerar relatórios técnicos e administrativos utilizando ferramentas básicas de informática;

Halliburton é um empregador de igualdade de oportunidades. As decisões de emprego são tomadas sem levar em conta raça, cor, religião, deficiência, informações genéticas, gravidez, cidadania, estado civil, sexo/gênero, preferência/orientação sexual, identidade de gênero, idade, status de veterano, origem nacional ou qualquer outro status protegido por lei ou regulamento.

Localização

Catu - BA - Brasil

Job Details

Requisition Number: 195795

Product Service Line: Production Enhancement & Production Solutions

PL53-ESG-Logistics Specialist, Assoc (Siberia, CUN, CO)

Job Duties

Under strict supervision, responsible for properly packing, marking, labeling, and acquiring weight and dimensions for cargo. Coordinates pre-shipping instructions and maintaining logs, files, and supporting documents. Responsible for the domestic and international movement of goods in compliance with local and international law. Role requires basic understanding of the complete logistics process cycle to include execution of proper documentation for domestic and international movement. Must be knowledgable of all possible movements constraints and have knowledge of hazardous movements. Demonstrates understanding of 1 or 2 modes of transport (ocean, air, land). Will coordinate orders for shipment of cargo from point of origin to point of destination to ensure product meets required delivery in the most efficient method while interfacing with the customers to keep them apprised for progress. Job tasks performed correctly impact directly on cost containment, efficiency, profitability and/or operations. Role requires the ability to assist F&A (finance and accounting) with validation of rates and charges on invoices. This function will utilize SAP and other logistics systems to perform job duties, and ensure correct and timely movement. Responsible for recording data measurement to help follow trends, in order to identify alternative ways to improve the moves and logistics services for the economic benefit of Halliburton. Requires completion of a 2 year degree in Supply Chain, Logistics, Information Systems or Engineering. Bachelor&aposs degree preferred. Entry level position. No previous experience required.

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 199558
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A427-ESG-Intern (Panama City, 8, PA)

Job Duties

Performs assignments designed to develop professional work knowledge and abilities requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of alternatives.

University Student, studying last year of: Accounting, Finance and Administration.
Letter of Internships granted by the university.
Business analysis and reporting skills preferred.
knowledge advanced on Excel preferred.
Intermediate English Level

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 198340
Experience Level: Entry-Level
Job Family: Support Services
PSL: Finance
Full Time / Part Time: Full Time

Tool Technician (Paramaribo, PM, SR)

Job Duties

Requires completion of a technical degree.
Ability to perform maintenance functions such as repairs on down-hole tools, surface equipment and other production equipment in the application for down-hole tools.
Basic computer skills are preferred.
Have a “can do” attitude as well as energy and passion for learning.

Qualifications

Location

Anton Dragtenweg 266, Apt 1, Paramaribo, , , Suriname

Job Details

Requisition Number: 198698
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Duty Technician 1st year to Journeyman (Clairmont, AB, CA, T0H 0W0)

Job Duties

Job Duties:

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

A high school diploma or equivalent is required.
Minimum skills may be acquired through a qualified technical school certificate or equivalent related experience.
Basic set of hand tools is required.
A technical school certificate and technical experience are preferred.
Must have a valid Class 5 Non-GDL driver's license and able to provide a copy of drivers abstract.
This position requires you to coordinate your own local housing in the Grand Prairie area during scheduled time on.
Schedule: 15 days on/6 days off with overtime eligibility. *Halliburton reserves the right to adjust schedules based on industry needs.*

Hiring Up:

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Mechanic Technician II and Mechanic Technician III.

Qualifications

Location

10202 70 Avenue, Clairmont, Alberta, T0H 0W0, Canada

Job Details

Requisition Number: 198058
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Software Development Engineer (Singapore, 05, SG, 639940)

Job Duties and Qualifications

Responsibilities

Design and develop professional quality desktop applications in an agile environment
Perform analysis to define system scope and objectives in order to develop and/or modify existing engineering applications
Ensure the Technical Software Development process is optimized and projects are on track
Define requirements, functional specifications, and testing documentation for various engineering software applications
Design and develop unit test for code validation and automated regression testing of overall systems validation
Incorporate lab testing and field testing with various cross-functional teams
Job role contributes to value creation

Required Education and Skills

Bachelor’s degree or equivalent in Computer Engineering or Computer Science
Minimum 3 years of related experience in software development
Self-initiative, independent and a good team player
Strong development experience using C++, especially C++ 11 principles
Proficiency with software design patterns such as OOO and SOLID
In addition to the above, candidate must have a minimum of 3 years of experience in the following
Developing desktop applications and reports using C#, Python, HTML, Java Script, XML, JSON technologies.
Developing Graphical User Interfaces (GUI) using WPF/XAML and MFC
Developing multi-threaded applications
Developing Real-Time solutions (applications that run within a fixed-time constraint)
Developing software using SQL, MS Access DB and MongoDB
Debugging software applications at different stages of maturity, ranging from development-prototype through to commercial-production maturity levels
Developing, debugging, and supporting software applications both locally and in remote locations
Developing software that directly interfaces with electrical devices (sending/receiving data, controlling electrical devices via software)
Experience working in cross-functional teams including mechanical and electrical engineers, acoustic and electromagnetic scientists (SME), and software architects
Experience in Embedded Software development and Real-Time Operating System is added advantage.

**Candidates having qualifications that exceed job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs.

Location

315 Jalan Ahmad Ibrahim, Singapore, Singapore, 639940, Singapore

Job Details

Requisition Number: 195729
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Gen Brazil - UX Designer (SP, BR)

We are seeking a talented and experienced iOS UX/UI Designer to join our team. The ideal candidate should possess exceptional design skills, particularly in Figma, and have a strong understanding of both mobile and web UX design principles. 

Mandatory Skills: 

Proficiency in Figma. 
Proven experience in creating mockups, including wireframes and high-fidelity designs. 
Bachelor's degree in Design, Human-Computer Interaction, or related field preferred but not required. Alternatively, a minimum of 5 years of experience and proven success in UX design.  
Articulate functionality and communicate effectively with leadership, stakeholders, and the development team. 
Experience in iOS mobile UX design.  
Present a Portfolio showcasing previous design work.

Non-Mandatory Skills: 

Experience working in an agile development environment is a plus.

Key Responsibilities: 

Work closely with iOS product development teams, product owners, and product managers to understand project requirements and translate them into intuitive and visually appealing user interfaces. 
Utilize Figma to create both wireframe and high-fidelity mockups for iOS mobile applications. 
Articulate functionality and design decisions effectively to leadership, stakeholders, and the development team. 
Collaborate closely with cross-functional teams to ensure alignment on design goals and objectives. 
Conduct user research and usability testing to gather feedback and iterate on designs. 
Stay up-to-date with the latest trends, techniques, and technologies in iOS UX/UI design.

Requirements: 

Proven experience as an iOS UX/UI Designer with a strong portfolio showcasing iOS mobile design projects. 
Proficiency in Figma and other design tools such as Adobe Creative Suite. 
Excellent communication and collaboration skills, with the ability to effectively communicate design concepts to various stakeholders. 
Strong understanding of iOS mobile UX design principles and best practices.

Location

São Paulo, SP - Brazil

Job Details

Requisition Number: 191180
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: [[division_obj]]
Full Time / Part Time: Full Time

Additional Locations for this position: São Paulo, SP - Brazil

LWD Field Professional II - General Field Professional (200151) (Broussard, LA, US, 70518)

Job Duties

Under general supervision, provides on-site supervision of the Logging- While-Drilling (LWD) process, including tool preparations, data acquisition, log generation and Quality Control (QC) and delivery of the services to the customer. Serves as the lead engineer on most jobs.
Ensures that all data presented to the customer is accurate, timely and meets the highest service quality standard possible.
Ensures that expected and needed data and possible problems are provided to the customer.
Provides technical consultation to all of Halliburton's clients.
This includes mud hydraulics, Bottom Hole Assembly (BHA) planning, formation evaluation, drilling tendencies, the mud system and BHA dynamics.
Properly tests all tools and equipment before, during and after each job.
Identifies and corrects operational problems to prevent or minimize service impact.
Accurately completes all required forms, databases and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI). Ensures BHA's are assembled as planned, including correct make-up torque, doping and handling.
Aware of customer requirements regarding directional survey procedures.
Interfaces with the Directional Driller (DD) to ensure BHA compatibility, planned operating parameters are within specification and correct tool face references are applied.
Participates in performance improvement initiatives as required.

Qualifications

Requires completion of a high school diploma or equivalent
Requires a minimum of one year of field experience in M/LWD.
Bachelor's Degree in a STEM discipline is preferred.
Requires completion of the basic M/LWD training program.
Must have successfully passed company tests, or met task guideline requirements.
Ability to demonstrate technical aptitude to required standards.
Must possess good communication, arithmetic, data entry and recording skills.
Requires ability to read and interpret formation well logs and interpret directional survey information and other well site data.
Must possess relevant on and offshore safety certificates.
This is a field position.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Field Professional or General Field Professional.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4607 Hwy 90 E, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 200151
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A427-ESG-Intern (Siberia, CUN, CO)

Job Duties

Entry level for professional work. Performs assignments designed to develop professional or technical work knowledge and abilities requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of alternatives. This classification is used for employees performing a designated function for an identified duration. May include continuing education.

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200377
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Instructor, Prin (Fort Worth, TX, US, 76140)

EMPLOYER: Halliburton Energy Services, Inc.

Job Title: Technical Instructor, Prin

Job Location: 1128 Everman Parkway, Fort Worth, TX 76140

Job Duties

Delivers Instructor-led training (classroom/virtual), technical job training and direct product sales or business development training for internal and external customers. Supports course design and development/updates of training content or curriculum based on individual business need. Coaches less experienced instructors and supports the Lead technical Instructor and Training Manager in managing the training calendar and training spending. Designs and develops skill demonstration exercises applying knowledge of electronics, mechanics, hydraulics, pneumatics, engineering, programming, or business development. Ensures the correct/safe use and handling of department tools and equipment. Conducts assessments of course objectives vs. student performance, diagnosis of performance gaps and integration of competencies in course curriculum. Maintains class information to include student attendance and scores on Halliburton's learning management system.

Qualifications

Employer will accept a Bachelor's degree in Engineering or related field and 8 years of experience in the job offered or in a Technical Instructor, Prin-related occupation.

Position also requires experience in the following:

Experience in the design, configuration, and installation of virtual remote training solutions including video, communications, and system integration.
Experience in delivering in-person and virtual remote technical wireline operations technical training program content to internal and external personnel.
Experience with coaching less experienced instructors and supporting lead instructor or manager with training calendar and training spending.
Experience with Reservoir Description technology, project (job) planning and execution, including expertise in fluid sampling, fluid identification, and pressure analysis.
Experience with supporting course design, developing updates, and creating creative solution for virtual training content or curriculum based on individual business needs.
Experience in design, preparation, and Execution of Formation Evaluation Wireline services, including imaging, formation evaluation, pressure analysis and fluid sampling.
Experience with ensuring correct/safe sensor calibration, use and handling of department tools and equipment.

To apply, visit jobs.halliburton.com and enter #200516 in “search by keyword” field. If offered employment, must have legal right to work in U.S. EOE, including disability/veterans.

US Broussard-Lab Technician-Chemistry (Associate- Lab Technician) (Broussard, LA, US, 70518)

Job Duties

Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards.
Follows prescribed safety rules and regulations in performing assigned duties.
Performs duties to conduct prototype or laboratory tests following prescribed procedures.
Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment.
Learns to document test data for reporting purposes.
Maintains files and documentation related to test equipment and test results of equipment.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.

Qualifications

Skills typically through eight (8) hours of college chemistry (preferred).

Location

124 Ida Road, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 200525
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Ho Chi Minh City, 65, VN, 99999)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues. Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Location

Saigon Trade Center,Suite 1206, Ho Chi Minh City, , 99999, Viet Nam

Job Details

Requisition Number: 199588
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Misc Support
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Full Stack Software Developer (Rio de Janeiro, RJ, BR, 291941)

Job Duties

We are seeking a talented Computer Scientist or Computer Engineer with professional experience in the software development industry. A M.Sc. in Computer Science or Engineering. The ideal candidate for this position is an expert in front-end and back-end development and web application software architecture. You will lead the development of web-based applications for the Energy industry. You must have a passion for web-based software development and modern web programing paradigms. Excellent problem-solving ability and good oral and written communication skills in both English and Portuguese are required.

This is a remote position, and you will join a multidisciplinary and diverse team of scientists and engineers committed to delivering high-end computational technologies and tools for the O&G and broader Energy industry.

What you must have:

Complete undergraduation Computer Science or Engineering
Proficient in C#
Intermediate knowledge of C++
Knowledge of Angular/Web stack development
Knowledge of Azure pipelines and deployments
Knowledge of Python
Proficient in Object Oriented Design and SOLID principles
Advance English speaker

Qualifications

Location

Rua Paulo Emidio Barbosa 485 Q, Rio de Janeiro, Rio de Janeiro, 291941, Brazil

Job Details

Requisition Number: 199311
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior R&D Mechanical Engineer (Macae, RJ, BR, 27930-070)

Job Duties

This role oversees the development of new products, from concept to commercialization, by managing the process from the creation of functional specifications to detailed design and field testing. The position is responsible for developing the next generation of Subsea product solutions under minimal supervision.

Responsibilities:

Designs hardware for product changes and new development by applying functional specifications and using engineering tools under general supervision.
Independently processes data, writes engineering reports, and diagnoses routine hardware malfunctions.
Assists with reliability analysis, such as risk assessments and Failure Mode Effects Analysis (FMEA), by compiling and analyzing data.
Identifies testing requirements at a system level, ensuring compliance with test standards and Halliburton’s Health, Safety, and Environment procedures.
Contributes to Halliburton’s Intellectual Property portfolio by preparing Invention Disclosures and recognizing ideas with Intellectual Property potential while safeguarding confidential information.
Works with project leads to deliver project results by evaluating input requirements and applying functional specifications.
Builds strong relationships through excellent communication skills and serves as a key resource, offering innovative solutions. May participate in professional societies within their area of expertise.

Qualifications:

A degree in Mechanical Engineering or a related discipline is required.
Familiarity with 3D Solid modeling platforms (SolidWorks), MathCAD, Simplified FEA analysis, and Mechanical Design fundamentals.
Experience with designing Subsea Electrical Connectors, electronics, and electrical troubleshooting is preferred but not required.
Knowledge of API 6A, 11D1, 14A, 17G, and/or API 19TT is preferred but not mandatory.
Minimal to moderate international travel may be necessary to meet project needs.
A master’s degree is the minimum educational requirement.

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 199212
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Offshore Baroid Service Supervisor (199644) (Lafayette, LA, US, 70507)

Job Duties

Under general supervision, helps drive service quality by planning, coordinating, directing, and overseeing service line work at the wellsite.
Plans and performs necessary calculations for the total job at the well site as needed.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
This position promotes and takes an active part in the quality improvement process, promotes safety awareness and environmental consciousness, complies with all applicable safety and environmental procedures and regulations, and ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.

Qualifications

This position requires the ability to effectively communicate with others, perform basic mathematical calculations involving addition, subtraction, multiplication, and division, and basic reading comprehension and writing skills.
Basic computer skills are preferred.
Completion of specific Baroid training is preferred.
A high school diploma or equivalent and a minimum of three years' experience is required.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

502 E Gloria Switch Rd, Lafayette, Louisiana, 70507, United States

Job Details

Requisition Number: 199644
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

HPS Account Manager (Rep. - Rep. Senior - Rep. Principal) Artificial Lift (Odessa, TX, US, 79765)

Job Duties and Qualifications

Responsibilities:
•   Under broad direction, utilizes subject matter expertise and established client relationships to sell Company products and services and achieve maximum profitability and market penetration/share.
•   Matches the Company's technical, commercial and operational capabilities to customer needs through developing a clear understanding of customer's business & technical issues and drivers and effective delivery of technical sales presentations and personal working relationships.
•   Calls on assigned and non-assigned accounts to effectively promote and sell the Company's products and services.
•   Plays an active role in the business planning process.
•   Job role directly creates value via personal relationships.
•   Revenue scope typically in the range of $5 - 50 M.

Requirements:
• Completion of an undergraduate degree in business administration, marketing, engineering, or similar disciplines
• 3-8 years of related sales experience.

Candidates who possess qualifications exceeding the minimum job requirements will be considered for higher-level positions based on their experience, additional job requirements, and current business needs. Depending on their education, experience, and skill level, candidates may be eligible for a range of job opportunities, including positions ranging from Account Representative, Senior Account Representative to Principal Account Representative.

Location

11722 W Highway 80 E, Odessa, Texas, 79765, United States

Job Details

Requisition Number: 196625
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronic Technician (Negara Brunei, BM, BN)

Job Duties and Qualifications

Under general supervision, performs preventive/predictive maintenance and repair of a variety of electronic and/or electrical equipment relative to their assigned location.
Possesses intermediate diagnostic/troubleshooting knowledge and skills.
Performs advanced testing of equipment to verify readiness after maintenance.
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Must possess advanced computer literacy.
Knowledge of part identification and system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and mentors others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
A high school diploma or equivalent and 3 years of experience in related electrical/electronic fields are required.
A Technical Certification or Associates degree in an Electrical field is preferred.

Location

F18, Lorong 4, Seria, Negara Brunei, Brunei-Muara, , Brunei Darussalam

Job Details

Requisition Number: 196591
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tool Technician (Georgetown, DE, GY)

Job Duties

Requires completion of a technical degree.
Ability to perform maintenance functions such as repairs on down-hole tools, surface equipment and other production equipment in the application for down-hole tools.
Basic computer skills are preferred.
Have a “can do” attitude as well as energy and passion for learning.

Qualifications

Location

LOT 103 CHARMICHAEL STREET, Georgetown, Demerara, , Guyana

Job Details

Requisition Number: 198699
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Especialista de Serviços - Surface Well Testing (SWT) (Macae, RJ, BR, 27930-070)

Job Duties

Trabalha rotineiramente em mais de um tipo de local de poço (em terra e offshore) e em base terrestre, conforme designado pelo Coordenador de Serviços.
Coordena e supervisiona as funções da Linha de Serviço de Produtos de Testes & Submarinos (Testes de Poço em Superfície) no local do poço e na base.
Fornece o planejamento necessário para o trabalho, incluindo a montagem dos equipamentos, direção no local do poço e atividades de suporte relacionadas ao cliente.
Responsável pelas atividades relacionadas à manutenção, montagem, teste e operação dos equipamentos no local do cliente e no campo.
Orienta e treina Operadores de Serviço nas áreas de sua especialidade.
Monitora instrumentos e realiza os cálculos necessários para garantir a qualidade dos dados/trabalho.
Consulta os clientes sobre os serviços e produtos, promove boas relações com o cliente no local do poço e garante a satisfação do cliente com os resultados.
Mantém adequadamente o equipamento designado e monitora a conformidade com os regulamentos e procedimentos de segurança.
Auxilia no carregamento e preparação dos equipamentos da linha de serviço de Testes & Submarinos (SWT) para os trabalhos.
Conduz reuniões de segurança (toolbox meeting) antes do início das atividades, revisa e verifica o plano de trabalho com o representante do cliente e gerencia quaisquer alterações necessárias, verifica os equipamentos conforme o plano de trabalho.

Qualifications

Formação Técnica completa, com CFT ativo;
Sólida experiência com Operação de Surface Well Testing (SWT);
Capacidade de interpretação de diagramas técnicos;
Experiência com realização de testes de pressão nos equipamentos com segurança;
Compreensão de hidráulica de fundo de poço, incluindo cálculos básicos do trabalho, identificação e funcionamento básico do Preventor de Erupção (BOP);
Excelentes habilidades de liderança e comunicação;
Capacidade para realizar cálculos matemáticos básicos;
Habilidades de compreensão de leitura e escrita;
Conhecimento do MS Office (Excel, Word, Outlook).

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200364
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Macaé - Operador de Serviços (HPS) (RJ, BR)

REQUISITOS

Curso Técnico Completo em Mecânica, Eletrotécnicae afins.
CFT Ativo;
Inglês Básico;
Conhecimento em Pacote Office;
Disponibilidade para viagens e embarque;
Residir em Macaé e região;
Desejável experiência prévia com Coiled Tubing.

Location

, [[city]], , ,

Job Details

Requisition Number: 196641
Experience Level:
Job Family: Operations
Product Service Line: [[division_obj]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Lead Developer (Senior - Advisor) (Houston, TX, US, 77032)

Job Duties and Qualifications

Lead the team of developers to implement the solution designed along with architects of the products
Perform troubleshooting and support for existing applications developed in C# and .NET to ensure reliable functionality and user satisfaction
Experience with test automation, continuous integration, change management and code reviews
Contributing Team Member with the ability to communicate to all levels of the organization
Ability to analyze information, design software, document solutions, perform testing
Understand Software Development Fundamentals, SD Life Cycle, and Functional/Technical Requirements gathering
Develop and maintain full stack web applications utilizing frameworks such as Angular and other relevant technologies
Provide expertise in database design and management, ensuring optimal performance and data integrity
Assess and develop application programming interfaces (APIs) to facilitate seamless integration between various systems and applications
Integrate AL/ML solutions into full stack web applications to enhance performance and deliver intelligent features
Develop and maintain efficient, reusable and reliable code
Conduct functional and non-functional testing
Ensure the best possible performance, quality, and responsiveness of applications
Learn and follow industry best practices adopted by the organization
Understand and follow good code automation concepts and principles
Understand client requirements and how they translate to new application features
Provide estimates for new change requests
Collaborate with development team and other IT staff to set specifications for new applications
Evaluate existing applications and understand how to modernize
Develop technical documents as required to accurately represent application design and code

Additional Skills

Proven experience development experience in . NET Framework, C#, etc.
Experience with Angular is a must
Experience with RESTful services, WEB API
Experience with Azure DevOps
Experience with ORM frameworks such as Entity Framework
Exposure to Azure cloud, micro services architecture
Document DB experience and strong understanding of good data design

Education Requirements

Requires a minimum degree of Bachelors in computer science or related field or equivalent industry experience
7-15 Years of experience in software development process – taking ownership, driving understanding, and delivering solutions that exceed expectations
Bachelor's Degree in computer science or similar field

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available including Technical Advisor - Software Dev and Senior Technical Advisor - Software Dev.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 197176
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Field Professional - General Field Professional - L&P Cased Hole - Global Team (Houston, TX, US, 77032-3219)

Job Description

This position is part of a global team that must be available to travel to and support operations in Saudi Arabia.

Initial training will be conducted in the US.

Under general supervision, applies knowledge of Halliburton's Cased Hole Wireline technologies to independently provide a comprehensive set of basic and complex services and tool operation to customers at the well site.
Applies engineering, mechanical and geological principles to articulate more complex data interpretations and downhole mechanical constructs to clients from proprietary software and coaches' clients through more routine drilling and completion scenarios independently.
Continues to learn how to interpret data outcomes with more complexity through mentorship from wireline field leadership.
Integrates understanding of the wireline business, operational procedures and to a lesser degree the collaboration of other service lines into guidance provided to customers.
Provides guidance to junior wireline field professionals on delivering fewer complex services and tool operations to customers.

Qualifications

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 2.5 year of experience in Cased Hole Wireline field operations required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Field Professional or General Field Professional.

Location

Must be willing to travel to and work in Saudi Arabia.

Job Details

Requisition Number: 198019
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional (Paramaribo, PM, SR)

Job Duties

Bachelor's degree in mechanical, electrical Engineering or similar.
Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment.
Computer literate and proficient in MS EXCEL.
Have a “can do” attitude as well as energy and passion for learning.

Qualifications

Location

Anton Dragtenweg 266, Apt 1, Paramaribo, , , Suriname

Job Details

Requisition Number: 198693
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A318-ESG-Advisor, Tax Sr (Ciudad de Buenos Aires, B, AR, C1004AAH)

Job Duties

Under general supervision, supports tax reporting and compliance with a core understanding of the Internal Revenue Code or applicable statutory authority and it's applicability to financial (general ledger) data. May support the monthly general ledger close, analyze financial accounting data on a monthly basis, and perform an account analysis of balance sheet and income statement accounts. Reviews functions of more junior staff and provides insight with regard to optimization of internal controls. Evaluates reasonableness of assumptions made in tax calculations and determining relevant facts and arriving at conclusion supported by laws. Works with tax law and accounting provisions, assists with preparation of statutory filings and/or tax returns, and provides support to Tax Managers in audits and preparation of responses to various taxing authority notices. Completion of an undergraduate degree in Accounting or related field required and a minimum of 3 years related experience required.

Qualifications

§Undergraduate degree in accounting or related field.

§Mandatory English proficiency.

§At least 3 years of experience of responsibility preparing and reviewing tax account reconciliations. Indirect and direct tax compliance obligations, with special focus on income tax and deferred tax reporting for USGAAP and local purposes.

§Effective communication and teamwork skills, with an ability to engage in an interdisciplinary, diverse and international setting.

§Proficient in using the MS Office suite and SAP.

§Strong knowledge of tax code, compliance, and procedures for corporations

§Experience using One Source platform is a plus.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199500
Experience Level: Experienced Hire
Job Family: Finance & Accounting
PSL: [[division]]
Full Time / Part Time: Full Time

Field Service Specialist II - Directional Drilling (Ploiesti, PH, RO, 107025)

Job Duties

JOB SPECIFICATION:

Under general supervision, provides on-site supervision of the Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) process, including tool preparations, data acquisition, log generation and quality control, and delivery of services to the customer. Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping, and handling.
Ensures that all data presented to the customer is accurate, timely, and meets the highest possible service quality standard.
Provides technical consultation and advice to customers using DD software, well path projections, well profile plots, survey calculations, and accurate directional survey data provided according to the clients surveying procedures.
Properly tests all tools and equipment before, during, and after each job.
Identifies and corrects operational problems to prevent or minimize service impact.
Works with the RDC engineers to accurately complete all required forms, databases, and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI). Interfaces with the Remote Drilling Coordinator and/or Directional Driller (RDC/DD) to ensure BHA compatibility, planned operating parameters are within specification, correct tool face references are applied, and toolface control is maintained on both tangents and build sections of the well.
Assists RDC in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and paperwork (well data spreadsheet, lesson learned/best practice).
Maintains records of all DD equipment at well site including dimensional data and condition, and ensures that all equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job.
Participates in performance improvement initiatives as required.
Requires completion of a high school diploma or equivalent.
An undergraduate degree in a STEM discipline is required.
Requires completion of the basic M/LWD and DD training programs, and a minimum of one year of experience in LWD and DD operations, preferably including experience as a FSS, I.
Must possess or be able to obtain any relevant on or offshore safety certificates.

Qualifications

Location

Comuna Aricestii - Rahtivani, Ploiesti, , 107025, Romania

Job Details

Requisition Number: 199459
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional - Senior Technical Professional - Frac (Calagry, AB, CA, T2P 3V4)

Job Description

Job Duties:

Under general supervision, provides technical assistance and analysis during planning and execution of frac and acid treatments based on subsurface, rock mechanics, and fluid mechanics knowledge.
From the customers office, works to analyze pressure while pumping based on surface and subsurface properties and able to execute and analyze diagnostic pumping techniques. Understands fluid systems and reactions based on subsurface properties.
Develops relationships with internal and external customers to meet requirements, manage expectations, recommend and carry out on the job changes from the wellsite. Collaborates with operations and Business Development teams to provide efficient execution of jobs.
Works with service coordinators to verify equipment and material for pre-job preparation.
Completes pre job fluid testing and analysis.
Provides technical documentation during and at the end of the job to Business Development and customers.
Validates end of job packet as per internal processes.
Completes projects surrounding basic engineering principles, job design and execution.
Understands and aids technology teams in the roll out of new technologies, both surface and subsurface.
Understands PSL specific equipment, and equipment requirements based on job design.
Able to operate on the job monitoring software and provide assistance for customer remote viewing operations (RTO).
Assists with development of Associate Technical Professionals.
Skills typically developed as an Associate Technical Professional Frac/Acid or Sand Control.
This role is primarily office based with occasional field visits.

Qualifications:

Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline.
1 year of experience in PE operations / engineering is required.
Must have a Class 5 non-GDL driver's license and able to provide a copy of drivers abstract.

Location

700 9th Ave SW Suite 2000, Calagry, Alberta, T2P 3V4, Canada

Job Details

Requisition Number: 199595
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Corporate Counsel - Public Law (Counsel - Sr Counsel) (TX, US, 77032)

This position will provide an excellent opportunity to join our growing Public and Corporate Law team. The Corporate Counsel will play a key role in supporting Halliburton’s legal strategy across corporate, securities, finance, public law, governance, and board-related matters. Ideal candidates will bring a solid foundation in these areas and a desire to grow and contribute to this critical function of the legal department. The role reports directly to the Vice President of Public Law within our Corporate Law Department.

Job Responsibilities:

Provide leadership in corporate law strategy and governance, including advising on domestic and international entity structure, in collaboration with tax and risk planning teams
Serve as a strategic legal advisor across the company, offering guidance on legal rights, obligations, and risk mitigation related to corporate planning, finance, and sustainability reporting
Lead domestic and international corporate transactions, including entity formations and dissolutions, name changes, redomestications, conversions, qualifications, and withdrawals
Support regulatory compliance efforts for legal entity licensing, qualifications, authorizations, and ongoing maintenance of domestic and international corporate entities
Manage corporate governance and entity management activities and provide legal support to the treasury and corporate finance departments
Act as a liaison to internal departments such as Treasury, Tax, Sustainability, Business Development, Marketing, and Investor Relations
Drive continuous improvement by identifying and implementing solutions to streamline legal operations and ensure efficiency
Support data gathering and documentation efforts for SOX compliance, internal audits, and other regulatory requirements
Support additional areas of public law as needed, such as Form 8-K filings, Proxy Statement review, SEC comment letter responses, board support, and stock management matters
Collaborate cross-functionally on corporate policies and best business practices

Requirements:

Bachelor's degree required
Juris Doctor (JD) from an accredited law school is required
Must hold an active law license and be in good standing to practice in at least one U.S. jurisdiction
Minimum of 5 years of relevant legal experience, preferably a combination of in-house and law firm experience
Demonstrated experience in corporate governance, entity management, and public law matters
Strong analytical and problem-solving skills; able to quickly assess legal risks and provide actionable recommendations
High attention to detail with the ability to manage multiple projects in a high-paced environment
Self-motivated with excellent organizational, research, and editing skills
Strong interpersonal and collaborative skills with the ability to work cross-functionally
Ability to communicate legal concepts clearly and effectively to both legal and non-legal audiences
High ethical standards and commitment to professional integrity

Why Halliburton?

Halliburton is widely recognized as a great place to work, full of great people who enjoy their work and collaborating with their coworkers. We simply enjoy working together and carrying out the job of serving our customers, our shareholders, and Halliburton. What sets Halliburton apart is the deep integration of our lawyers and legal department into every aspect of the business, its strategy, leadership, and customer-focused value proposition. Joining our legal team means stepping into a world of opportunity, with a presence in over 70 countries and a global workforce of 48,000. At Halliburton, lawyers are not only legal advisors but also strategic business partners with a seat at the table. You’ll collaborate across functions to design innovative solutions that serve both our customers and the company. While many companies may highlight a culture of collaboration, we embody it. We hire, support, and grow collaborative, proactive leaders because they drive meaningful impact. At Halliburton, the legal department is respected, empowered, and positioned to lead. Halliburton is a place where you can grow not only as a lawyer, but as a business leader.

Unlike many traditional oil and gas companies, Halliburton offers a unique combination of global scale, innovative thinking, and a strong commitment to professional growth. We embrace a forward-looking approach that balances operational excellence with sustainability and long-term value creation. Our inclusive culture fosters cross-functional collaboration and values diverse perspectives, making it a dynamic place to build a career. Employees benefit from access to cutting-edge technologies, world-class training, and meaningful work that directly impacts global energy solutions. What truly sets Halliburton apart is our investment in our employees, we don’t just offer jobs; we offer careers with purpose, backed by a culture that encourages leadership at every level.

Halliburton’s World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays, and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Please Note:
This posting is intended to collect candidate information for Halliburton’s talent pool, and is not considered an application. By completing the candidate profile, recruiters will have visibility to your information in order to contact you for a future related job opportunity. In addition to providing your information on this posting, we encourage you to create a Job Alert within our career site. The Job Alert allows you to select search criteria for positions that match your interest(s). Once positions are posted that match your search criteria, you will receive an email notification.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200606
Experience Level: Experienced Hire
Job Family: Support Services
PSL: Legal
Full Time / Part Time: Full Time

Brasil - Banco de Talentos PcD (Efetivas) (RJ, BR)

Atraímos e retemos os melhores talentos, investindo em nossos funcionários e capacitando-os para que se desenvolvam e desenvolvam suas carreiras. Esta oportunidade também está disponível para pessoas com deficiências (PCD’s).

Requisitos

Ensino Técnico ou Superior Completo;
Ter Registro no Conselho;
A partir de 18 anos de idade ;
Inglês a partir do nível intermediário;
Conhecimento em Pacote Office;

Localização

Macaé, RJ

Rio de Janeiro, RJ

Catu - Operador de Serviços (HPS) (BA, BR)

REQUISITOS

Curso Técnico Completo em Mecânica, Eletrotécnicae afins.
CFT Ativo;
Inglês Básico;
Conhecimento em Pacote Office;
Disponibilidade para viagens e embarque;

Location

, [[city]], , , Brazil

Job Details

Requisition Number: 196642
Experience Level:
Job Family: Operations
Product Service Line: [[division_obj]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Accountant (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Under direct supervision, develops working knowledge and understanding of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares basic accounting reports and accounting analyses with related spreadsheets or applications input.
Develops working knowledge of the organizational structure of the company.
Prepares and posts journal vouchers for basic accounting transactions.
Researches basic accounting issues and transactions including related internal controls.
Applies technical accounting skills typically acquired through completion of a university degree in accounting.
Knowledge of US GAAP or country-specific accounting principles required. Requires completion of an undergraduate degree in accounting, business, or other related field. No previous accounting experience required.
Job role is developmental and intended to expose incumbents to basic aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as beginning levels of proficiency with industry and company acumen.

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 199529
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Procurement Specialist (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Under direct supervision, plans sourcing of goods and services to support manufacturing, field operations, technology, or project management strategic plans at the plant level
Complies with and executes Category Management strategies in accordance with policies and procedures
Issues purchase orders in response to material requirements established by manufacturing, field operations, or projects
Implements agreements for local procurement of goods and services not covered under Category Management
Creates request for quotations (RFQ) and organizes competitive biddings from various suppliers to obtain the best quality, delivery, and price for goods and services
Assesses supplier performance
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Completion of an undergraduate degree in a technical, business, or similar discipline required
Minimum of 2 years of experience in procurement or production environment
Advanced procurement certification preferred (CPM, etc.)
Purchase to Pay knowledge is desirable

Qualifications

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 200587
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor (I-III) - Slickline (Prudhoe Bay, AK, US, 99734)

Job Description

Job Duties:

Under general supervision, leads a crew in providing the least complex slickline services in a geographic area.
Is accountable for onsite customer satisfaction.
Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job.
Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed.
Performs onsite emergency unit/equipment maintenance as needed.
Demonstrates knowledge of pre and post-job product and service activities (employee's ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Trains service operators and operator assistants in areas of expertise.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc.
Completes all well site and post-job paperwork.
Participates in post-job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Develops his/her knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings.
Develops customer service, negotiation and leadership skills.

Qualifications

A high school diploma or equivalent is required.
Experience as a Slickline Operator Assistant and Service Operator are required for this position.
Must have a current and valid Class A commerical driver's license and clean motor vehicle record.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Additional Information

Halliburton covers the first flight from the lower 48 to Anchorage, AK.
10% Alaska living allowance available to employee's whose primary residence is in Alaska.
5% Alaska living allowance available to employee's whose primary residence is outside of Alaska
Lodging and meals provided during scheduled work rotation
Position is eligible for a travel stipend of $700/month for employee’s whose primary residence is not in Alaska.
Employee's residing outside of Alaska are responsible for coordinating their own travel to and from Anchorage, AK for their work rotation as well as their own transportation to and from the airport and the Halliburton facility in Anchorage.
2 weeks on 2 weeks off schedule *Halliburton reserves the right to adjust schedules based on industry needs.*

Location

Pouch 340026, Prudhoe Bay, Alaska, 99734, United States

Job Details

Requisition Number: 199594
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sperry Directional Drilling Field Professional II (200157) (Broussard, LA, US, 70518)

Job Duties

Under general supervision, provides on-site supervision of the Directional Drilling (DD) process including projection of well path to predetermined target coordinates.
Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping and handling.
Proficient in the use of DD computer software and able to assist in provision of advice and analysis to the client representative at the well site.
This shall include all survey calculations and well path projections.
Proficient in updating well profile plots and providing client representative with accurate directional survey data.
Aware of client's requirements with regards to surveying procedures. Assists in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and relevant paperwork (well data spreadsheet, lesson learned/best practice, End of Job Customer Survey (EJCS) and Key Performance Indicator (KPI) forms).
Familiar with the DD aspects of the client's approved drilling program.
Assists in the inspection of all DD company equipment delivered on the work site.
Interfaces with the MWD engineer to ensure BHA compatibility, planned operating parameters are within specification and correct toolface references are applied.
Maintains records of all DD equipment at well site including dimensional data and condition.
Ensure that all equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job.
Participates in performance improvement initiatives.

Qualifications

Requires completion of a high school diploma or equivalent.
Requires a minimum of three years of field experience in Directional Drilling, L/MWD, or SDL, with at least six months in DD.
Bachelor's Degree in a STEM discipline is preferred.
Requires ability to read and interpret designed well plans, directional survey information and other well site data.
Ability to demonstrate technical aptitude of required standards.
Must possess good communication, arithmetic, data entry and recording skills.
Must possess relevant rig safety certificates.
This is an offshore field position.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4607 Hwy 90 E, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 200157
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Area Resource Specialist (Vung Tau, 43, VN)

Job Duties

Under general supervision, coordinates and tracks the movement of equipment, materials, and personnel within a Natural Work Area (NWA).
Works directly with field personnel to ensure proper resources are allocated to meet service delivery requirements.
Maintains scheduling board and report on utilization of personnel and equipment.
May serve as a backup to Area Resource Coordinator for sale order creation.
Troubleshoots and resolves SAP order to cash issues to include but not limited to timely reconciliation of Sales orders.
Ensures crew travel requirements meet applicable Health, Safety and Enviornmental guidelines.
Promotes safety awareness and enviornmental consciousness and complies with HSE procedures and guidelines.
Skills are typically acquired through a High School Diploma or similar education and a minimum of 3 years experience as an Area Resource Specialist I or equivelant.
Promotes and actively participates in the quality improvement process.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 198835
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cable Technician (I - III) - Artificial Lift (Leduc, AB, CA, T9E 0R8)

Job Description

Job Duties:

Under direct supervision, performs basic operations to test and repair downhole cable for submersible pumps and motor equipment.
Receives cable and carries out basic tests.
Uses hipot machine to make basic repairs and learns how to splice cable.
Completes paperwork to send cable to inventory or field.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
This is an entry level position where the employee is expected to learn all relevant company HSE policies and procedures and to demonstrate their application into his/her duties.

Qualifications:

High school diploma or equivalent required.
Previous experience preferred but willing to train.
Must have a current and valid driver's license and be able to provide a copy of drivers abstract.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.

Location

7101 39 Street, Leduc, Alberta, T9E 0R8, Canada

Job Details

Requisition Number: 198751
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant - Wireline (Perforating) (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of surface and down hole well logging equipment on work locations for the purpose of recording information about sub-surface geologic formations.
Learns basic oil well operations including the identification of different rig types and drill string components, Blow Out Prevention (BOP) procedures and equipment, Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines.
Assists during the operation of well logging equipment at job site.
Learns to assemble down hole well logging tools (electric, nuclear, sonic, and other well logging tools).
Learns to maintain, clean and perform preventative maintenance on down-hole and surface well logging equipment.
Assists in the performance of pre and post job vehicle and equipment inspections and associated paperwork and/or reports.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Skills are typically acquired through successful completion of high school or similar education.
Licensure to drive commercial equipment may be required in certain locations.
Successful completion of Well Control Accreditation Program may be required (some locations).
Successful completion of water survival training may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
This is the entry level position into the service operator job family.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 200197
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Solutions Engineer (Drilling) (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under broad direction, is responsible for driving sales by understanding and addressing customer challenges with Landmark solutions.
This is an entry-level role in solution sales, including but not limited to various disciplines in engineering and science.
Identifies opportunities, Mapps solutions to customer needs, conducting product/solution presentations, demos and leading Proof-of-Value projects to demonstrate solution value and grow sales.
Collaborates with sales representatives and other internal & external stakeholders to create technical proposals and drive deal closures.
Develops and maintains key customer relationships, and actively contributes to day-to-day execution of Landmark’s strategy in the assigned geography and domain.
Demonstrates thought leadership through industry events, Tech Days, technical publications, workshops and webinars.
Provides market and customer feedback to aid product/solution innovation, and shares knowledge and experience with the broader Landmark organization.
Skills are typically acquired through the completion of an undergraduate degree in an engineering, computer science, or similar discipline (discipline may vary by domain) and a minimum 2 years of experience in the energy software industry or equivalent.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 200533
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electro/Mechanical Technician - Principal Electro/Mechanical Technician (Alvarado, TX, US, 76009)

Job Duties

Performs routine and some non-routine testing/analyzing processes with demonstrated proficiency.
Has some latitude for problem-solving.
Works under general supervision for repetitive tasks, and under direct supervision for new tasks.
Testing and evaluation of wireline tools.

Qualifications

Skills typically acquired through 1-2 years working in a related technician capacity.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Electro/Mechanical Technician, Senior Electro/Mechanical Technician, or Principal Electro/Mechanical Technician.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

8432 South Intersate 35W, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 200299
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant I-Cementing (Roma, QLD, AU, 4455)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.

Qualifications

Requires successful completion of high school diploma or equivalent education.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: Essential Mathematics, Red Book, and Cementing 1.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the service operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
This is an entry level position in the Cementing family.

Location

Lot 9 Roma Downs Road, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 200629
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Software Developer (Full Stack, Cloud) (Bengaluru, KA, IN, 560103)

Job Duties

Under general supervision, assists in designing, coding, testing, trouble-shooting and documenting engineering systems applications. Works on projects of moderate scope and complexity. The developer will be expected to have experience of common tools and processes used to design, code, test, trouble-shoot, document engineering systems applications. Assists in developing test strategies used in the automated regression testing of these systems. Follows secure coding practices, performs triaging of security issues, and implements fixes to deliver secure applications. Familiar with common software vulnerabilities and leading practices to mitigate. Should have the ability to research open source technologies for use in building systems and participate in open source communities as needed. Develops tasks/assignments and schedules for project work. Requires completion of an undergraduate degree in Computer Science or similar discipline, and 2 + years of related experience.

Overview:

We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.

We are looking to recruit an experienced Software Developer to work with our Assisted Well Interpretation (AWI) team based out of our Abingdon office, Oxfordshire. Reporting to the AWI Team Lead and working closely with the Product Owner and remaining Scrum team, you will be responsible for implementing services and features in our AWI suite of applications in a multi-year roadmap.

Key Responsibilities:

Feature Development & Implementation: Collaborate within a Scrum team to design, implement, and deploy new features and services based on product owner priorities.
Quality Assurance: Maintain a high standard of quality in all deliverables, including thorough self-testing before handing off to QA.
Technical Expertise & Growth: Continuously stay updated on existing and emerging technologies relevant to software development and our domain.
Effective Communication: Clearly and promptly communicate any issues or roadblocks, ensuring timely resolution.

Qualifications

Education: Bachelor's degree in Software Engineering, Computer Science, or a related field.

Experience: 2 to 5 years.

Knowledge, Skills, and Abilities

Essential Qualifications:

Software Development Experience: 2-3 years of experience in software development, with a foundational understanding of design patterns and principles.

Java & Microservices: Experience with Java development, including familiarity with SpringBoot.
Front-End Technologies: Experience with Angular (v14+) and associated front-end web technologies (HTML, CSS, JavaScript).
Database Experience: Familiarity with relational databases, including SQL, and exposure to databases like PostgreSQL or Oracle.
Machine Learning: Basic understanding of Machine Learning concepts or exposure to technologies like Python/TensorFlow.
Cloud & SaaS Development: Understanding of cloud concepts and exposure to platforms like Azure and/or AWS. Familiarity with Docker and Kubernetes for containerization and orchestration is a plus.
CI/CD Tooling: Familiarity with build pipeline tools and technologies like GitLab and Gradle.
Agile Methodology: Experience working in an Agile development environment and participating in ceremonies like stand-ups.
Self-Motivated & Team Player: A self-starter who thrives in a collaborative team environment, capable of both independent work and effective cooperation.

Desirable Skills & Experience:

Domain Knowledge: Experience in the Geology domain, especially within Oil and Gas.

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 199431
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer (Singapore, 05, SG, 637131)

Job Duties

Under general supervision, applies functional specifications and uses engineering tools to design hardware for product changes and new development.
Independently processes data, writes engineering reports, and conducts diagnosis of routine hardware malfunctions.
Contributes in reliability analysis such as risk assessments and Failure Mode Effects Analysis by compiling and examining data.
Identifies the testing requirement at a system level with the emphasis on complying with test standards and Halliburton's Health, Safety, and Environment procedures.
Contributes to Halliburton's Intellectual Property portfolio by preparing Invention Disclosures and recognizing ideas that have Intellectual Property potential without disclosing confidential information.
Coordinates with project leads to produce project deliverables by assessing input requirements and applying functional specifications.
Develops relationships through excellent communication skills and acts as a key resource to provide innovative solutions.
May participate in professional societies in area of specialization.

Requirement:

Requires completion of a bachelor's degree in Mechanical Engineering or similar discipline; master's degree preferred. Requires two years of related experience (requirement may be waived with master's degree).

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 198928
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Well Control Specialist (II - III - IV) Project Management (Conroe, TX, US, 77385)

Job Duties

Responsibilities

Under direct supervision, provides on-site consulting and monitoring of oil well blowout and emergency conditions and assists in drilling operations, as well as, fire fighting, well-killing and other blow out procedures in emergency drilling situations.
Confers with both customer and government representatives, as needed, to ensure that company interests are protected and that project completion goals are met.
Ensures that well-site activities are well managed, coordinated, and completed in accordance with Company policies, procedures, quality standards, and safety regulations.
Advises on specific servicing problems and recommends use of specialized tools, techniques, and services.
Equipment usage and maintenance using extensive mechanical aptitude.

Requirements

Completion of an undergraduate degree in engineering, geoscience, geology, or related discipline preferred or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 7 years of experience in well site operations.
Must work under hazardous conditions including high pressure, high temperature, loud noise, fire, chemical and gas exposures, moving machinery, etc.
Professional relationships with regulators, inspectors, officials, suppliers, and customers are maintained.
Well organized with strong planning and project management skills.
Attention to detail. Quality orientation. Able to organize multiple projects. Excellent communication skills. Strong problem solving abilities.
Strong PC computing skills, including MS Office and engineering software.
Good communication and effective working relationships exist with other departments.

Candidates with qualifications exceeding the minimum job requirements will be considered for higher-level positions based on their experience, additional job requirements, and current business needs. Depending on their education, experience, and skill level, candidates may be eligible for a range of job opportunities, including positions ranging from Well Control Specialist II, Well Control Specialist III to Well Control Specialist IV.

Qualifications

Location

16548 Donwick Drive, Conroe, Texas, 77385, United States

Job Details

Requisition Number: 198533
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logistics Specialist (Georgetown, DE, GY)

Job Duties

Requires undergraduate degree or equivalent in Supply Chain, Logistics, Information Systems or Engineering

Requires 1 to 2 years of experience in related field of logistics, with at least two transport modes (Ocean, Air or Land).

Knowledge of Hazardous movements preferred.

Residence in Georgetown-Guayana is mandatory.

Qualifications

Location

LOT 103 CHARMICHAEL STREET, Georgetown, Demerara, , Guyana

Job Details

Requisition Number: 197969
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL35-ESG-Procurement Specialist (Neuquen, Q, AR, 8300)

Job Duties

Under direct supervision, plans sourcing of goods and services to support manufacturing, field operations, technology, or project management strategic plans at the plant level. Complies with and executes Category Management strategies in accordance with policies and procedures. Issues purchase orders in response to material requirements established by manufacturing, field operations, or projects. Implements agreements for local procurement of goods and services not covered under Category Management. Creates request for quotations (RFQ) and organizes competitive biddings from various suppliers to obtain the best quality, delivery, and price for goods and services. Assesses supplier performance. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Completion of an undergraduate degree in a technical, business, or similar discipline required. Minimum of 2 years of experience in procurement or production environment. Advanced procurement certification preferred (CPM, etc.). Purchase to Pay knowledge is desirable.

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200033
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cement Service Supervisor I-II (Zanesville, OH, US, 43701)

SIGN ON BONUS AVAILABLE

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process. Candidate must meet the minimum developmental standards for this job classification.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.

Qualifications

Skills are typically acquired through a high school diploma, or similar education and,
One year of experience as Service Operator-Cementing, II.
Licensure to drive commercial equipment is required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Has necessary working skills within the service line and a general understanding of other service functions.

World Class Benefits:

Medical, dental, vision, coverage in addition o life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200700
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

Completions Field Operations Professional I-II (199373) (New Iberia, LA, US, 70560)

Job Duties

The purpose of this job is to provide an employee a series of "On The Job Development" practical field assignments for an operations supervision career path.
This job exists to correctly classify employees that are part of this specific developmental program and is not to be used without prior approval of the HCT Regional Manager or the Area HCT PSL Manager.
Under direct supervision, the employee will become knowledgeable of Halliburton Management System (HMS), Halliburton and Customer Health, Safety and Environment (HSE) Standards and work methods and guidelines for personnel.
Promotes safety awareness in mobilization of crews as well as all aspects of location operations.
Actively promotes and uses our tools related to safe working such as Job Safety Analysis, Behavior Based and Hazard Observation Programs.
Utilizes the competency processes to enhance skill development and job performance.
Proper license may be required to drive light duty vehicles with trailers.
This Development Job role requires completion of competencies generally aligned with the development of a Service Operator II.

Qualifications

Undergraduate degree required.
Engineering or STEM degree preferred.
Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Field Operations Professional II

Location

3504 West Admiral Doyle Drive, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 199373
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional-Completions (Associate - Senior) (New Iberia, LA, US, 70560)

Job Duties

Under direct supervision, provides technical and operational expertise to external customer in a professional manner.
This is the entry level position for this discipline. Performs assignments requiring knowledge and application of basic engineering principles.
Assists in the delivery of Completion, Products & Services (CPS) services. Assists in pre- planning, job execution, and post job analysis to ensure project success and efficiency.
Participates in developmental programs to accelerate learning and to increase abilities relative to the successful implementation of PSL objectives.
Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment.

Qualifications

Undergraduate degree required – acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Technical Professional to Senior Technical Professional.

Location

3504 West Admiral Doyle Drive, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 197944
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Wireline Electrical/Mechanical Technician - Principal Elect/Mech Technician (199641) (New Iberia, LA, US, 70560)

Job Duties

Under direct supervision, services, troubleshoots, repairs, and maintains electrical and mechanical logging equipment as directed either as part of a preventive maintenance crew or individually.
Performs electrical and mechanical analytical troubleshooting, repair, and maintenance as part of a routine maintenance program.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.

Qualifications

Skills are typically acquired through an associate degree in electronics or related electrical and mechanical experience.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Elec/Mech Technician or Principal Elec/Mech Technician

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

719 Hanger Dr, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 199641
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Slickline Service Supervisor I-III (198956) (New Iberia, LA, US, 70560)

Job Duties

Under general supervision, leads a crew in providing the least complex slickline services in a geographic area.
Is accountable for onsite customer satisfaction.
Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job.
Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed.
Performs onsite emergency unit/equipment maintenance as needed.
Demonstrates knowledge of pre and post-job product and service activities (employee's ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Trains service operators and operator assistants in areas of expertise.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc.
Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Develops his/her knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings.
Develops customer service, negotiation and leadership skills.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

719 Hanger Dr, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 198956
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

MWD & DD Field Engineer, II (Cunduacan, TAB, MX, 86693)

Job Duties

Under general supervision, provides on-site supervision of the Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) process, including tool preparations, data acquisition, log generation and quality control, and delivery of services to the customer. Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping, and handling. Ensures that all data presented to the customer is accurate, timely, and meets the highest possible service quality standard. Provides technical consultation and advice to customers using DD software, well path projections, well profile plots, survey calculations, and accurate directional survey data provided according to the clients surveying procedures. Properly tests all tools and equipment before, during, and after each job. Identifies and corrects operational problems to prevent or minimize service impact. Works with the RDC engineers to accurately complete all required forms, databases, and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI). Interfaces with the Remote Drilling Coordinator and/or Directional Driller (RDC/DD) to ensure BHA compatibility, planned operating parameters are within specification, correct tool face references are applied, and toolface control is maintained on both tangents and build sections of the well. Assists RDC in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and paperwork (well data spreadsheet, lesson learned/best practice). Maintains records of all DD equipment at well site including dimensional data and condition, and ensures that all equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job. Participates in performance improvement initiatives as required. An undergraduate Technical degree in a STEM discipline is required. Requires completion of the basic M/LWD and DD training programs, and a minimum of one year of experience in LWD and DD operations, preferably including experience as a FSS, I. Must possess or be able to obtain any relevant on or offshore safety certificates.

Qualifications

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200647
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 199741
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Accountant (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under general supervision, applies knowledge of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input.
Prepares and posts journal vouchers for complex accounting transactions. Reviews and monitors financial transactions for accuracy and timeliness.
Researches and resolves complex accounting issues and transactions including related internal controls.
Prepares, analyzes, and distributes financial results including variance explanations.
Participates in multi-functional teams and develops project management skills.
Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen.
Minimum of three (3) years of experience in accounting related roles required.
Requires completion of an undergraduate degree in accounting, business, or related field.
Knowledge of US GAAP or country-specific accounting principles required.

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 199790
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tax Manager - Senior Tax Manager (Houston, TX, US, 77032)

Job Duties

Under broad direction, manage the US federal tax processes. This includes US related compliance, provision, planning, and audit support for domestic operations.
Technical expertise in US income taxation of corporations including corporate reorganizations and international business operations
Broad knowledge of accounting for income taxation under US GAAP (ASC 740)
Experience in reviewing business operational activities and accounting records, identifying income tax issues, researching applicable tax law, reaching technical conclusions, and communicating conclusions verbally and in writing
Experience in reviewing relevant tax forms including Forms 1120, 8865, 5471, 8858, and 1118
Experience in defending income tax return positions under audit by the Internal Revenue Service
Experience in developing relationships and working collaboratively across various departments and areas of the business
Responsible for career development and coaching of personnel

Qualifications

Completion of an undergraduate degree in accounting or related field.
7 years related experience and/or equivalent combination of education and competency.
Excellent personal communications skills and ability to work in team environment a must.

Preferred Qualifications

Advanced degree in taxation or accounting preferred
Applicable professional certification preferred
Experience using OneSource Income Tax and Tax Provision, Excel, Power BI, Alteryx, SAP, and Hyperion preferred

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles give (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available from Tax Manager to Senior Tax Manager.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200670
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL35-ESG-Procurement Specialist (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 199990
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL23-ESG-Supply Chain Analyst (Macae, RJ, BR, 27930-070)

Job Duties

Under general supervision, facilitates and conducts analysis of supply chain data including company and industry trends in key categories and supplier groups to support supply chain teams. Under general direction, develops, enhances, tests and implements analytical reports to support supply chain processes and required metrics. Utilizes various data sources to assemble, analyze and provide deep business insights from the data. Takes ownership of reporting using internal data and industry trends, and compiles research using third party data. Identifies and proposes automations and efficiency improvements by leveraging technology that will address critical projects and business needs. Leads or assists smaller scale projects and interacts with vendors to enable project outcomes. Presents data findings and deep business insights to various levels of management, including direct supervisor and executive leadership. Completion of an undergraduate degree required, preferably in STEM, Supply Chain, or Business.

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 199068
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

OpenWorks Delivery Manager (Houston, TX, US, 77032)

Job Duties

As a Development Lead for Landmark, you will have the opportunity to contribute to the data management architecture of industry leading software. You will work closely with cross-functional teams and regional experts to design, implement, and support solutions with a focus on data security and global availability to facilitate data-driven decisions for our customers.

Design and Development: Plan and implement new functionality and features in globally deployed E&P services.
Shape enterprise-level user experiences: Model, create, and improve the next generation of user experiences for E&P customers.
Data Modelling: Work with data architects to create and maintain data models optimizing storage, retrieval, and analysis.
Database Administration: Plan, implement and iterate on databases using the latest technologies to ensure performant, scalable, and secure solutions.
Automation: Develop and maintain automation CI/CD pipelines to handle all stages of the software lifecycle.
Monitoring and Troubleshooting: Monitor customer environments to proactively identify and resolve issues while providing support for incidents.
Data Security: Implement and consistently improve measures to protect sensitive information and ensure compliance with regulations.
Documentation: Write and maintain documentation for processes, configurations, and procedures.

Qualifications

BS degree in Computer Science, Software Engineering, or a related field
Proficiency in Database technologies (Oracle & Postgres RDBMS) and software languages (Java, Python, C++, NodeJS, Angular,)
Knowledge and experience with Cloud Platforms (AWS, Azure), Cloud Managed Services (RDS, Messaging, Serverless Computing), and Containerization (Docker)
Professional acumen in the E&P Domain and Data Management
Excellent problem-solving and troubleshooting skills.
Strong desire to stay up to date with the latest trends and technologies in the field.
Ability to work independently and lead a team.
Strong communication and collaboration skills.
Commitment to delivering exceptional customer experiences

Location

3000 N Sam Houston Pkwy E, Houston, Texas, 77032, United States

Job Details

Requisition Number: 199905
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer (Senior - Advisor) (Duncan, OK, US, 73533)

Job Duties

Acts as a project lead by establishing development plans and preparing for design reviews.
Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results.
Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.
Contributes to Halliburton's Intellectual Property portfolio by delivering innovative and commercially successful solutions.
Creates an impactful relationship with Halliburton's technical community, customers, and vendors by proactively collaborating with key stakeholders.
Participates in professional societies in area of specialization.

Qualifications

Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.
Minimum educational requirement of a doctoral degree and zero years' experience or a master's degree and two or more years' related experience or a bachelor's degree and four or more years' related experience.

Location

2600 South 2nd St, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 197768
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

K903-ESG-Tech Prof-Frac/Acid, Assoc (Neuquen, Q, AR, 8300)

Job Duties

Under direct supervision, develops skills to allow for technical interpretation and operational assistance at the wellsite during frac operations in a professional manner. Assists in pre job planning, field level execution, and post job documentation as on the job training. Works alongside operations to develop equipment based knowledge. This is an entry level position. Knowledge will be built through completion of courses based on Pressure Analysis while pumping, fracture mechanics, rock and fluid mechanics, as well as diagnostic pumping. Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline is required.

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200521
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL35-ESG-Procurement Specialist (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200036
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Account Manager (I - III) - Landmark Software & Services (Calagry, AB, CA, T2P 3V4)

Job Duties and Qualifications

Under broad direction from local sales management, responsible for selling software and software related services to customers.
This Outside Sales, Account Manager (AM) will sell directly to customers.
This individual is responsible for securing revenue targets against an assigned quota, ensures profitability of the relationship, and improves market share/penetration by directing the total array of the company's technical, commercial, and operational capabilities to the assigned client's domestic needs.
Builds relationships with customer's staff, management, and executives across all aspects of the Oilfield Life Cycle.
Develops territory and account plans that are focused on expanding our business.
Provides accurate forecasting of business including a Commit, Upside and Pipeline of deals and opportunities.

Qualifications:

Requires completion of an undergraduate degree.
Minimum of one year of sales experience.
Individuals will be accountable for revenue scope of (typically) $2-$5M.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available including Account Manager II, and Account Manager III.

Location

700 9th Ave SW Suite 2000, Calagry, Alberta, T2P 3V4, Canada

Job Details

Requisition Number: 196960
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Business Development Account Rep - Principal Business Development Account Rep - HCT (Midland, TX, US, 79701)

Job Duties

Under broad direction, utilizes subject matter expertise and established client relationships to sell Company products and services and achieve maximum profitability and market penetration/share.
Matches the Company's technical, commercial and operational capabilities to customer needs through developing a clear understanding of customer's business & technical issues and drivers and effective delivery of technical sales presentations and personal working relationships.
Calls on assigned and non-assigned accounts to effectively promote and sell the Company's products and services.
Plays an active role in the business planning process.
Job role directly create value via personal relationships.

Qualifications

Skills typically acquired through completion of an undergraduate degree in business administration, marketing, engineering, or similar disciplines and 3-8 years of related sales experience.
Revenue scope typically in the range of $5 - 50 M.

Location

125 W Missouri - Suite 300, Midland, Texas, 79701, United States

Job Details

Requisition Number: 198758
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP01-ESG-Operator Asst I-L&P (Barrancabermeja, SAN, CO)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of surface and down hole well logging equipment on work locations for the purpose of recording information about sub-surface geologic formations. Learns basic oil well operations including the identification of different rig types and drill string components, Blow Out Prevention (BOP) procedures and equipment, Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines. Assists during the operation of well logging equipment at job site. Learns to assemble down hole well logging tools (electric, nuclear, sonic, and other well logging tools). Learns to maintain, clean and perform preventative maintenance on down-hole and surface well logging equipment. Assists in the performance of pre and post job vehicle and equipment inspections and associated paperwork and/or reports. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. Skills are typically acquired through successful completion of high school or similar education. Licensure to drive commercial equipment may be required in certain locations. Successful completion of Well Control Accreditation Program may be required (some locations). Successful completion of water survival training may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. This is the entry level position into the service operator job family.

Qualifications

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 198716
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A452-ESG-Coord, HSE (Villavicencio, MET, CO)

Job Duties

Under direct supervision of Operations leadership, the Coordinator is responsible for the implementation of health, safety and environmental policies, procedures and guidelines as instructed. Duties are likely to be within a defined project, work site or geographic location. Activities include, but are not limited to, hazard identification and risk management, incident reporting, investigation and causal analysis, waste minimization, pollution prevention and control, emergency response, and various compliance activities in all areas of HSE. Provides oversight of the integrated management system (HMS) that at a minimum meets the needs of the company and the requirements of industry standards. Conducts and participates in internal, regulatory, and customer audits and inspections. Record-keeping and other general administrative duties are likely. Provides technical advice, data interpretation, training, and process improvement. Requires an Undergraduate Degree in an HSE related field, Science, or Engineering and three years of experience in Oil & Gas, or Manufacturing.

Qualifications

Location

Cra. 21 No.8B-36, Villavicencio, , , Colombia

Job Details

Requisition Number: 199704
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: HSE
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tax Supervisor (Houston, TX, US, 77032)

Job Duties and Qualifications

Under the supervision of the Federal Income Tax Manager

Work with the co-sourced service provider to ensure accurate and timely corporate and partnership income tax returns filing
Analyze, prepare, and review book-to-federal income tax adjustments
Responsible for preparing and reviewing tax basis balance sheets, return to accruals, and book-to-tax reconciliations
Supports the accounting for income tax process by preparing and reviewing activities associated with the annual consolidated income tax provision processes (ASC 740 and FIN 48), ensuring proper workflow and due dates are met
Work with tax depreciation system or external service provider to calculate tax depreciation and other property-related tax adjustments
Prepare and review federal extensions and quarterly estimated tax payments, including making payments via EFTPS to the IRS
Assist with federal tax audits and resolution of IRS notices
Develop responses to inquiries by internal and external auditors that pertain to matters within the area of responsibility
Research, interpret, and follow US federal income tax laws and ASC 740 rules and regulations in preparing tax provisions and disclosures. Stay abreast of changes in US federal income tax and ASC 740 rules and regulations and ensure that changes are reflected in the financial statements in a timely manner
Partner with and collaborate with the Tax Planning team to develop and execute tax strategies that reduce the company's overall tax costs/burdens
Collaborate with Finance and Accounting, Treasury, Legal, Tax Planning, Tax Compliance, and Transfer Pricing on tax and accounting issues to ensure that matters impacting the financial statements are timely and accurately reported in the Company’s financials and tax returns
Identify and implement opportunities for process improvement in the tax compliance and tax provision process, especially concerning technology utilization
Special projects and initiatives

Requirements

Must have a minimum of seven years of experience in corporate income tax in a public accounting or multinational corporate environment
Requires an undergraduate degree in accounting
A Master’s degree in Taxation or Accounting and/or a CPA designation are a plus
Solid knowledge of federal and state income tax laws
Good understanding of Tax Accounting
Attention to detail and good organization skills, ability to multi-task and prioritize in a fast-paced environment
Working knowledge of Corptax, OneSource, and tax research tools
Working knowledge of SAP a plus
Proficient in using Excel (advanced functions like pivot tables, VLOOKUP, etc.) is required. Experience using Alteryx, tax engines, and data analysis software to streamline is a strong plus
Strong communication skills and ability to work in a team environment a must

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 194308
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

NC Programmer (Conroe, TX, US, 77385)

Job Duties

Under close supervision, this position is responsible for acquiring expertise in creating quality NC part programs used on numerically controlled production machines.
Work is checked during progress and is reviewed for accuracy upon completion.
Reviews tool selection and machining methods with PGL or more experienced programmer prior to creating a part program, assures departmental procedures are followed, creates NC part programs and submits for final approval, and assembles programs using existing reacall modules.
Updates existing tapes per engineering change request or manufacturing needs and reviews plots and output listings of programs with experienced programmers prior to tape release.

Qualifications:
•   High school diploma or equivalent is required.
•   Skills typically acquired through 4-5 years working in a lathe and/or milling machine capacity.
•   Experience with Vericut machine sim and NX is preferred but not required.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Qualifications

Location

16548 Donwick Drive, Conroe, Texas, 77385, United States

Job Details

Requisition Number: 198356
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Business Development Account Rep - Principal Business Development Account Rep - MultiChem (Odessa, TX, US, 79763)

Job Duties

Under broad direction, utilizes subject matter expertise and established client relationships to sell Company products and services and achieve maximum profitability and market penetration/share.
Matches the Company's technical, commercial and operational capabilities to customer needs through developing a clear understanding of customer's business & technical issues and drivers and effective delivery of technical sales presentations and personal working relationships.
Calls on assigned and non-assigned accounts to effectively promote and sell the Company's products and services.
Plays an active role in the business planning process.
Job role directly create value via personal relationships.

Qualifications

Skills typically acquired through completion of an undergraduate degree in business administration, marketing, engineering, or similar disciplines and 3-8 years of related sales experience.
Revenue scope typically in the range of $5 - 50 M.

Location

6155 W Murphy, Odessa, Texas, 79763, United States

Job Details

Requisition Number: 198926
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Bulk Material Operator (I - II) Cementing (Evansville, WY, US, 82636)

Job Duties

Under direct supervision, safely maintains cementing bulk equipment and the bulk plant.
Responsible for pulling bulk equipment to be loaded and used at wellsite.
Learns and applies all applicable HMS processes to properly load bulk materials and interacts with the lab.
Assists in loading bulk chemicals for jobs.
Learns to calculate load out sheets and how to safely and accurately operate the Accublend at the bulk plant.

Qualifications

High school diploma or equivalent required.
0-1 years of experience of material handling or cementing operations.
Must be able to learn and apply all applicable HSE policies and procedures and demonstrate their application into his/her duties.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension, communication skills, and writing skills are required.
Basic computer skills are preferred.

Hiring Up

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

6900 Nugget Rd, Evansville, Wyoming, 82636, United States

Job Details

Requisition Number: 197946
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

MIS/Data Manager - Global Travel (Houston, TX, US, 77032)

Job Duties

Under broad direction, the MIS/data manager will lead Global Travel MIS/Data Excellence for Travel as required to meet Halliburton performance expectations.
This role will design and support regional travel data feeds into an integrated management information system by global data consolidation that facilitates benchmarking, balanced measures, reporting, analysis, and informed decision making.
A responsibility of this role is to define and resource projects and priorities to continuously improve service delivery and cost management of travel services with the defined regions.
This job is accountable for delivery of projects in terms of budget, schedule, and scope by demonstrating leadership skill, and directs one or more diverse project teams.
The MIS/data manager collects reviews and recommends new tools and methodologies that enhance performance.
In addition, this role suggests and assists in the application of balanced performance measures for Real Estate/Travel and provides guidance on system design, measurement, monitoring, and improvement.
Job role contributes directly to value creation.

Qualifications

Completion of an undergraduate degree in Business, Marketing, Finance, MIS is required to successfully perform the essential functions of the job.
Minimum of 10 years of experience in Real Estate/Travel which includes experience in Service Quality.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 198536
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Real Estate Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator I - Cementing (Evansville, WY, US, 82636)

***$1,500 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience.

Potential Annual Earnings: $98,000+/yearly
- Average annual earnings are an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Casper, WY.
$45/day Per Diem
2 weeks on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs.*

Job Duties and Qualifications

Job Duties:

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies.
Learns to perform pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports.
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers.
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

Skills are typically acquired through successful completion of high school or similar education.
6 months of experience as an Operator Asst-Cementing, II.
Class A CDL required, with manual transmission experience preferred.
May require I-Learn courses: General Hydraulics for Downhole Tools and Essential Preventative Maintenance.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

6900 Nugget Rd, Evansville, Wyoming, 82636, United States

Job Details

Requisition Number: 196528
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Service Operator II - Cementing (Fort Lupton, CO, US, 80621-8345)

***$1,500 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience.

Service Operator II: $21.50 - $23.94/hr.
Potential Annual Earnings: $125,000/yearly
Average annual earnings are an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Fort Lupton, CO.
$45/day Per Diem
US internal employees may be eligible for relocation to the Fort Lupton, CO area.
2 weeks (24/hr on-call) on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs. *

Job Duties and Qualifications

Job Duties:

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools.
Performs pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job. Downloads controller and/or performs real-time report generation of job data using the appropriate computer system.
Completes documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools.
Assists in communicating the pre-job and on-the-job progress to customer.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

Skills are typically acquired through successful completion of high school or similar education.
1 year of experience as Service Operator-Cementing I.
Class A CDL required with manual transmission experience.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.
Capable of being deployed to any rig in the work area.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 196523
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: Applications are accepted on an ongoing basis

Compensation Information:

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

R&D Electrical Firmware Engineer (Senior - Advisor) 198731 (Carrollton, TX, US, 75006)

Job Responsibilities

Under general supervision, acts as a technical lead on projects, as required, by establishing development plans and approving design documents
Evaluates project risks and provides input to project leads to develop mitigation strategies
Uses engineering tools, test specifications and assessment of Health, Safety and Environment requirements during the design process
Uses software tools or applications to perform routine analysis to predict reliability and performance
Contributes to Halliburton's Intellectual Property portfolio by delivering innovative and commercially successful solutions
Creates an impactful relationship with Halliburton's technical community, customers, and vendors by proactively collaborating with key stakeholders
Participates in professional societies in area of specialization
Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline and 4 years of related experience
Completion of a masters degree in Electrical Engineering or similar discipline is preferred

Firmware Position Job Roles:

Knowledge of digital and embedded circuit and mixed signal design fundamentals
Design and analysis of signal conditioning circuits (filtering, gain)
Signal Integrity analysis
Subject matter expert in embedded firmware design w/o RTOS
Design and analysis of data acquisition systems including A/D, D/A, high speed Microcontrollers, Digital Signal Processors (DSP), FPGA, I/O communications (SPORT, CAN, SPI, I2C, RS485, RS232, Ethernet, etc.), volatile and non-volatile memory.
Design and development of embedded firmware with DSP, ARM, Microcontrollers and FPGA.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available from the R&D Senior Electrical Engineer, Principal Electrical Engineer up to the Advisor Electrical Engineer

Location

2550 Country Club Dr, Carrollton, Texas, 75006, United States

Job Details

Requisition Number: 198731
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Operator Assistant Trainee - Cementing (Fort Lupton, CO, US, 80621-8345)

***Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience

Operator Assistant Trainee: $16.00/hr.
Potential Annual Earnings: $83,000
- Average annual earnings is an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Fort Lupton, CO.
$45/day Per Diem
Hotel accommodations for 60 days for employee's relocating to the Fort Lupton, CO area.
2 weeks (24/hr on-call schedule) on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs.*

Job Description

Job Duties:

Under supervision, you will learn basic safety, repair and operations procedures on equipment and tools for this job.
You will Learn and adhere to Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines.
Assists in the completion of pre and post job equipment inspections and associated paperwork and/or reports.
Assists in rigging-up and rigging-down of operation equipment which can include high-pressure iron and hose connections.
Assist in completing preventative maintenance procedures and maintaining support equipment.
Assists in the clean-up, repair, and preparation for a job.
Practices safe driving procedures when traveling to and from locations.
Completes training as required following the Company's learning development system and processes.

Qualifications:

CDL permit preferred prior to start date.
Must be able to obtain a Class A CDL license with tanker endorsement within 90 days after start date.
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Able to lift up to 60lbs
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long workdays, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effecting working relationship with other employees

Additional Information:

Benefit enrollment begins within 30 days of hire date and coverage will become effective on the 90th day of employment.
Eligible to participate in the Halliburton Retirement and Savings (401K) Plan as of the first day of employment.
Sign-on bonus after the 90th day of employment

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 199028
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: Applications are accepted on an ongoing basis

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

R&D Electrical Hardware Engineer - Power Electronics (Senior - Advisor) 198759 (Carrollton, TX, US, 75006)

Halliburton has immediate opportunity for a Power Electronics Electrical Engineer located in Carrollton, TX. This is an exciting opportunity to join an innovative team at one of the world’s largest providers of products and services to the global energy industry. The ideal candidate will have Downhole Tool Design experience, specifically high temperature electronics.

Job Duties

Design, simulation, development, implementation, verification and validation of Analog and Power Electronics based systems & components used in downhole applications where the systems must withstand harsh environments and exhibit high reliability
Development of common AC/DC and DC/DC converter topologies & inverters for motor drives
Knowledge of power electronics converter systems including active/passive component selection, input/output filter design, compensation circuit design and gate driver circuits
Experience in design and specification of power electronic magnetics and motors
PCB design and layout
Troubleshooting of power electronics and proficiency in using lab equipment
Working knowledge in commonly used circuit simulators (LTSPICE, PSPICE, etc.) and math tools (Matlab, MathCAD, etc.)
Functional and qualification testing of the designed boards and sub-assemblies

Qualifications:

Bachelor’s degree in electrical engineering
Experience with Board Level Analog Design
Downhole Design experience
Experience with High Temperature Electronics
Experience with Power Electronics and Motor Drives
Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline and 4 years of related experience. Completion of a masters degree in Electrical Engineering or similar discipline is preferred.

About Halliburton:

Halliburton is one of the world's leading providers of products and services to the energy industry. Founded in 1919, we create innovative technologies, products, and services that help our customers maximize their value throughout the life cycle of an asset and advance a sustainable energy future.
Our experts collaborate and engineer solutions to help customers maximize value throughout the lifecycle of the reservoir. We combine technology, services and execution expertise to assist our customers with hydrocarbons location, geological data management, drilling and formation evaluation, well construction and completion, and production optimization throughout the life of their asset.
Our people are essential to our ability to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. We invest in our employees through leadership and competency development, competitive compensation plans, health benefits, work-life programs, and reward and incentive plans.

Location

2550 Country Club Dr, Carrollton, Texas, 75006, United States

Job Details

Requisition Number: 198759
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Cement Operator Assistant II (198201) (Zanesville, OH, US, 43701)

Job Duties

$1000 Sign On Bonus Available

Depending on the job location, lodging and rotating schedule may be provided.

Responsibilities:

Under supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, and rigging-up appropriate data monitoring equipment
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports
Verifies correct line up of valves on bulk systems and surface manifold equipment
Understands hazardous materials, job, wash up and discharge procedures
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

Work Experience:

Must have 3-6 months of experience as Operator Assistant I – Cementing or 1 year of related work experience in oilfield services

Must have Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Completion of Operator Assistant I – Cementing competencies, or similar level of competence from previous industry experience
Able to lift 60 lbs.
Able to communicate effectively with others
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 198201
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Consultor de Surface Well Testing (Macae, RJ, BR, 27930-070)

Job Duties

Prepara os equipamentos de Testing and Subsea para os trabalhos e acompanha a prontidão dos equipamentos;
Pode auxiliar no treinamento de Profissionais de Campo Associados;
Toma decisões sobre equipamentos/pessoal relacionadas às operações de Testing and Subsea no local;
Especialista Técnico Local na área de (PSL), fornecendo suporte aos clientes e Engenheiros de Campo;
Fornece projeto de trabalho (DOS), avaliação de reservatório, suporte ao poço e análise pós-trabalho aos clientes;
Mantém cronogramas de trabalho e ajuda na realização dos PPRs;
Ajuda a construir sinergias entre os PSLs;
Inicia, revisa e encerra CWR, Taproot, HAZID/HAZOP;
Fornece análise de teste de poço ao cliente.

Qualifications

Graduação em Engenharia Mecânica, Elétrica, Petróleo, Controle e Automaçao, Quimica ou Produção (Registro de Conselho Ativo);
Conhecimento de Equipamentos Submarinos para Operação de Completação;
Conhecimento em CAD / Solid Works será um diferencial;
Proficiência intermediária/avançada em inglês;
Residir em Macaé ou região;
Regime misto (onshore e offshore).

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 198908
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant II - Cementing (Fort Lupton, CO, US, 80621-8345)

***$1,000 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience.

Operator Assistant II: $18.00/hr.
Potential Annual Earnings: $88,000/yearly
- Average annual earnings are an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Fort Lupton, CO.
$45/day Per Diem
Hotel accommodations for 60 days for employee's relocating to the Fort Lupton, CO area.
2 weeks (24/hr on-call) on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs.*

Job Description

Job Duties:

Under supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, and rigging-up appropriate data monitoring equipment
Learns basic oil well operations including but not limited to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports
Verifies correct line up of valves on bulk systems and surface manifold equipment
Understands hazardous materials, job, wash up and discharge procedures
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

High school diploma or equivalent required.
Must have 3-6 months of experience as Operator Assistant I – Cementing or 1 year of related work experience in oilfield services.
Class A CDL preferred with manual transmission experience.
Class A CDL permit preferred prior to start date
Must be able to obtain a Class A CDL within 90 days after start date. Halliburton will enroll employees into a class to obtain a CDL.
Manual transmission experience preferred.
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges.
Completion of Operator Assistant I – Cementing competencies, or similar level of competence from previous industry experience
Able to lift 60 lbs.
Able to communicate effectively with others.
Able to pass background, physical and drug screen.
Able to understand and carry out routine oral and written instructions.
Able to perform basic mathematical calculations.
Able to accommodate a flexible work schedule, long workdays, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions.
Maintains effective working relationship with other employees.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 199027
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: Applications are accepted on an ongoing basis

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Logging Geologist-SDL (Pune, MH, IN, 411001)

Job Duties and Qualifications

Requires completion of an undergraduate degree in Engineering, Science, Geoscience, Petroleum Engineering or a related field and no previous experience. This is a developmental role to obtain the required competencies from the SDL, LWD and Directional Drilling Sub-PSL&aposs to progress to a specialization in Optimization, Geosteering or Survey Management.

Location

Sai Radhe Building 100, 101, Pune, Monaghan, 411001, India

Job Details

Requisition Number: 197177
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cement Service Operator I (198164) (Zanesville, OH, US, 43701)

Job Duties

$1500 Sign On Bonus Is Available

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies.
Learns to perform pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports.
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers.
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.

Qualifications

Skills are typically acquired through successful completion of high school or similar education and at least 6 months of experience as an Operator Asst-Cementing, II.
Class A CDL is required
May require I-Learn courses: General Hydraulics for Downhole Tools and Essential Preventative Maintenance.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
A passing score on job-related tests or meeting task guidelines is required.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 198164
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

Supervisor, Accounting- Continuous Improvement Lead - Hire to Retire (H2R) / Payroll Process (Bangalore, KA, IN, 560103)

Job Duties and Qualifications

Continuous Improvement Lead – Hire to Retire (H2R) / Payroll Process

Strong understanding of Hire to Retire (H2R) processes, including HR processes, Employee Master Data, Payroll Processing, Payroll Accounting, and Key Business Metrics Reporting.
Knowledge of SAP, SuccessFactors, ADP GlobalView, ADP Celergo, Salesforce, and other leading ERPs. Familiarity with reporting tools like Blackline, Hyperion, and process mining tools like Celonis is advantageous.
Minimum of 8 years of experience in the H2R domain, driving CI, technology projects, and payroll transformation initiatives.
Lead Payroll Transformation projects and collaborate with Global Process Owners to design solutions for respective functions.
Drive H2R projects with a mix of technology on Intelligent Automation, ERP Implementation & Optimization, Standardization, and Lean / Continuous Improvement Initiatives.
Apply subject matter expertise to evaluate and re-engineer business operations and processes.
Develop insights from data/reports to improve metrics/quality and support global KPIs/SLAs reporting.
Utilize data visualization tools like Power BI to ensure the correctness and clarity of global metrics.
Conduct diagnostic reviews, due diligence, and design thinking workshops to identify transformation roadmaps.
Review process controls, identify gaps, and implement corrective actions (5 Why's analysis, CAPA).
Manage global key metrics and drive standardization efforts across processes.
Collaborate with stakeholders, influence decisions without authority, and present solutions to management effectively.
Demonstrate excellent communication, interpersonal, and leadership skills to align cross-functional teams with organizational goals.
Responsible for requirement gathering, development, and UAT for transformation projects.
Ensure timely delivery of key transformation initiatives for H2R, aligned with project timelines.
Bring process inconsistencies and improvement ideas to management with actionable solutions.
Drive automation and innovation, leveraging tools for Intelligent Automation, Process Mining, and Visualization.
Ensure the team is focused on quality investigations and continual improvement to enhance business outcomes.
Experience in Intelligent Automation, process re-engineering, and ERP solutions.
Strong analytical and organizational skills, with a proven ability to deliver high-quality results in a dynamic environment.
Excellent written, verbal, and interpersonal communication skills, with the ability to influence senior executives.
Dependable, mature, and professional, with integrity and a strong positive attitude.
Proven ability to multi-task effectively, prioritize responsibilities, and adapt in a fast-paced environment.

Knowledge, Skills, and Abilities

Basic Qualifications: Graduate, master’s degree Preferred

Total Years of Experience: 10 - 15 years

Location: Bangalore, Karnataka, India.

Shift timings: 1 PM to 10 PM (Flexible as per business requirements)

Location

6th Floor, Hibiscus Tower 2 Bu, Bangalore, Karnataka, 560103, India

Job Details

Requisition Number: 196646
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional - Completions, Sr (Aberdeen, ABE, GB, AB32 6JL)

Job Duties

JOB DESCRIPTION:

Under broad direction, provides Completion, Products & Services (CPS) job design, well support, and post job analysis to customers in designated area. Develops and maintains personal relationships with the technical customer base.
Provides technical support on location as required by the customer or PSL.
Interprets well site data in real time using complex technologies such as software simulators and the latest electrical and mechanical equipment, calculations, and modeling.
Solve on the spot issues remotely and occasionally at the well site.
Assignments require sufficient professional experience to assure competence as a fully trained professional.
Must be able to work independently.
Functions as a communications link between customer, Business Development and Operations. Develop and mentor Associate Technical Professionals and Technical Professionals.
Undergraduate degree required – acceptable degrees are: all engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry with 3 yrs industry experience.
Certification as a Licensed/Chartered Professional Engineer is preferred.

Qualifications

Location

Peregrine Road, Westhill, Aberdeen, Aberdeen, AB32 6JL, United Kingdom

Job Details

Requisition Number: 200573
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator II - Cementing (Bossier City, LA, US, 71111)

Job Duties

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Performs pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system
Completes documents, reports, and forms related to the cementing service performed
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: Cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Assists in communicating the pre-job and on-the-job progress to customer
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

Requires completion of a high school diploma or equivalent
1 year of experience as Service Operator I - Cementing or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
A passing score on job-related tests or meeting task guidelines is required
Capable of being deployed to any rig in the work area

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4720 Industrial Dr, Bossier City, Louisiana, 71111, United States

Job Details

Requisition Number: 198167
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Lawyer (Attorney - Counsel - Sr Counsel) (TX, US)

The position requires strong contract review and negotiation skills, legal research capabilities, and the ability to interpret laws and judicial decisions in a business context. The attorney will work closely with internal departments, external clients, vendors, and outside counsel, and must consistently demonstrate sound judgment and a commitment to the highest ethical standards.

Job Responsibilities:

Advise on a broad range of legal matters, including commercial contracts, regulatory issues, and corporate governance
Draft, review, and negotiate various contracts and agreements (e.g., service agreements with customers and vendors, licensing, confidentiality, alliance, distributor agreements, letters of intent and memorandums of understanding)
Identify legal risks and recommend practical solutions that support business objectives while protecting the company’s interests
Support corporate transactions, including mergers, acquisitions, and financings, as needed
Collaborate cross-functionally with departments such as Procurement, Compliance, HR, and Finance
Liaise with external counsel and manage legal costs effectively
Monitor changes in relevant laws and regulations and ensure compliance across the organization
Prepare and deliver presentations and training to internal teams on legal and compliance matters
Maintain proper documentation and adhere to internal policies and best practices

Requirements:

Juris Doctor (JD) degree from an accredited U.S. law school
Licensed and in good standing to practice law in at least one U.S. jurisdiction
3 years plus of legal experience in energy industry commercial contracting is required
Experience in the field of government contracting requirements is a plus
Strong contract drafting and negotiation skills
Ability to manage multiple projects in a fast-paced, deadline-driven environment
Excellent communication, interpersonal, and organizational skills

Why Halliburton?

Halliburton’s World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays, and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

, [[city]], Texas, , United States

Job Details

Requisition Number: 200736
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Legal
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant-Accounts Payable (Bengaluru, KA, IN, 560103)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company. Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 200560
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant - Cementing (Vung Tau, 43, VN)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Requires successful completion of high school diploma or equivalent education.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: Essential Mathematics, Red Book, and Cementing 1.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the service operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
This is an entry level position in the Cementing family.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 200626
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor - Cementing (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Skills are typically acquired through a high school diploma, or similar education and one year of experience as Service Operator-Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Candidate must meet the minimum developmental standards for this job classification.
Has necessary working skills within the service line and a general understanding of other service functions.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 198866
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Customer Financial Services (CFS Rep) (Ho Chi Minh City, 65, VN, 99999)

Job Duties

Under direct supervision, generate cash from customer account receivables (A/R) in an effective and timely manner;
Develop and maintain internal and external customer relationships to effectively facilitate the collection process;
Identify and address early and late stage challenges/collection issues;
Provide routine level support to assigned accounts including organizing and maintaining data files related to customer A/R;
Identify and record customer disputes;
Review customer financial information to begin understanding elements of economic risk;
May assist in credit investigations and evaluation.
Typically requires an undergraduate degree in Business Administration and 1-2 years of experience in commercial collections.

Qualifications

Location

Saigon Trade Center,Suite 1206, Ho Chi Minh City, , 99999, Viet Nam

Job Details

Requisition Number: 199116
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Misc Support
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

K941-ESG-Tech Prof-Cementing, Sr (Coca, D, EC)

Job Duties

Under broad direction, uses cementing knowledge and experience to develop the cementing job design to meet customer requirements, including preliminary job calculations, running computer simulations, designing fluid systems, submitting lab test requests and reviewing and approving test results, performing risk assessments, verifying the design meets regulatory requirements, and providing cost estimates for the planned operation. Provides operational expertise including operational instructions and identifying resources required to perform the job. Independently performs post job analysis, provides recommendations for improvement, implements agreed improvements for subsequent jobs and shares learning with the Cementing Team and advertises success by writing, publishing and presenting case histories and industry papers (for example SPE). Develops and maintains personal relationships with the technical customer base to effectively sell tailored cement solutions. Collaborating with customer office based drilling and / or production engineers, uses cementing knowledge to tailor solutions to meet their requirements and Halliburton&aposs commercial expectations, considering both the price of the solution to the customer, including consideration for solutions and pricing offered by competitors, as well as the total cost to Halliburton to deliver it. Understands the Business Acquisition Process. Assists with tender preparation and the development of customer specific Performance Optimization Plans (POP). Sells new technology and processes identified in the POP plans to maximize profitability and / or market share. Performs technical investigations of irregular jobs and initiates, reviews, and closes CPIs (Correction, Prevention, Improvement) pertaining to job design and technology. Provides technical support at the well site as required by the customer or PSL. This involves verifying the job design using the final job input parameters and the engineering tools originally used to design the job. Consults with PSLs regarding equipment needs and specifications and verifies all resources required for the cement design are available and meet local regulatory requirements. Assists PSL managers, using available performance metrics, to identify ways to improve materials, equipment and personnel utilization, reduce costs and increase service efficiency. Provides and consolidates chemical and casing equipment forecasts from across the designated area in sufficient time for deliveries to meet forecasted job dates while maintaining inventory targets (inventory levels, turn rates, slow moving, excess etc). Mentors junior members of the cementing team, ensuring they follow the Halliburton Management System and their development plans. Must be able to work independently. Completion of an undergraduate degree in Science, Technology, Engineering or Math discipline required. Requires a minimum of 2 years experience in cementing and requires completion of the required cementing competencies.

Qualifications

Location

Kilometro 5 Via Lago Agrio, Coca, Coca, , Ecuador

Job Details

Requisition Number: 200345
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Planner (Tianjin, TJ, CN, 300457)

Job Duties

Under general supervision, creates, updates, and maintains SAP sales orders for Product Service Line (PSL) Service Coordinator. Focuses on minimizing sales order day sales outstanding. Support the Service Coordinators through specific processing of order to cash, plant maintenance and procurement data entry. Responsible for daily inventory commitment and reconciliation. Troubleshoots & resolves SAP order to cash issues. Work with resource planners in maintaining accuracy of scheduling board and the dispatching of jobs in SAP. Work with resource planners, plant maintenance, and accounting teams to resolve scheduling issues. Creates requisitions as required and supports processing and transfer of cost to a sales orders or MBU. Creates standing maintenance orders to assign sundry item cost to mobile business unit (MBU). Skills are typically acquired through a high school diploma or similar education and 2 years experience in PSL. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.

Qualifications

Location

No. 160 Dongting Road, TEDA, Tianjin, Tianjin, 300457, China

Job Details

Requisition Number: 199690
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Material Handler II - Baroid (Westlake, LA, US, 70669)

Job Duties

Responsibilities:
• Under direct supervision, safely and effectively package and ships produced product per product specifications, formulations, and/or customer requirements.
• Receives and unloads raw material used in production.
• As needed, it loads raw material into plant production lines per production requirements and formulation.
• Operates forklift and other loading and unloading equipment as required.

Qualifications:
• Requires a High School Diploma or equivalent.

Qualifications

Location

3500 Bayou D'Inde Road, Westlake, Louisiana, 70669, United States

Job Details

Requisition Number: 199602
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Aberdeen - R&D Mechanical Engineer, Senior (Aberdeen, ABE, GB, AB32 6JL)

Job Duties

JOB DESCRIPTION:

Acts as a project lead by establishing development plans and preparing for design reviews.
Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results.
Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.
Contributes to Halliburton's Intellectual Property portfolio by delivering innovative and commercially successful solutions.
Creates an impactful relationship with Halliburton's technical community, customers, and vendors by proactively collaborating with key stakeholders.
Participates in professional societies in area of specialization.
Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.
Minimum educational requirement of a doctoral degree and zero years' experience or a master's degree and two or more years' related experience or a bachelor's degree and four or more years' related experience.

Qualifications

Location

Peregrine Road, Westhill, Aberdeen, Aberdeen, AB32 6JL, United Kingdom

Job Details

Requisition Number: 200312
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional Associate - Coiled Tubing (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Under direct supervision trains and becomes familiar with well site services and activities.
This role assists in providing project planning, job design/execution and post job analysis.
At this level, assignments are generally well defined with clear and specified objectives.
Performs Coiled Tubing assignments requiring knowledge and application of basic engineering principles and adherence to Company policies, standards, and work methods.
Acquires and applies foundational knowledge of Halliburton processes, PSL field services, project planning and wellsite solution design.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor or peer review and can be corrected.
Completion of an undergraduate STEM degree is required and a petroleum engineering degree is preferred.
Requires strong mechanical aptitude & interpersonal skills.
Basic knowledge of computer skills, relevant modeling techniques, service tools/equipment and industry best practices.
Learns role and impact on team/organization goals and regularly contributes to those goals.

Qualifications

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 200395
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A017-ESG-Accountant, Sr (Ciudad de Buenos Aires, B, AR, C1004AAH)

Job Duties

Contador(a) Publico(a), Lic. en Administración de empresas o carreras afines

Ingles avanzado

3 años de experiencia en liquidación de sueldos, cálculo y liquidación 4ta categoría; cargas sociales

Conocimiento en impuesto a las ganancias.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199780
Experience Level: Experienced Hire
Job Family: Support Services
PSL: [[division]]
Full Time / Part Time: Full Time

Technical Consultant - Drilling (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience.
Working with customers, demonstrates knowledge of existing and emerging technology and product areas.
Communicates to individual clients how the use of technology solutions allow them to be more productive.
Is able to articulate and apply solution for assignment delivery. As an individual contributes to project teams.
Effectively plans and manages own workload to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals. Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 3 years of experience.

FUNCTIONAL REQUIREMENTS

Data Management, Monitoring, Analytics and Reporting at the customer location. The Drilling Data analyst should assist the team in well planning, well monitoring, carry out drilling analytics and assist in creating adequate reports.
Data analyst should be acquainted in all drilling activities and should be able to assist in well planning activities in addition to carrying out torque and drag and hydraulic analysis at customer location in consultation with customer’s representatives.
The Drilling Analyst shall monitor all drilling parameters (WOB, ROP, GPM, Hook Load, Pit Volumes etc.) on a Real-Time basis to detect early onset of drilling, tripping complications (such as kick, stuck-pipe, unusual gain/loss, drilling break, abnormal pressure surge, detect surge & swap while tripping) and warn relevant stakeholders.

Qualifications

Education - Graduate Degree in Petroleum/Geology/ Mechanical/Electronics & Telecommunication/Information Technology/Computer Science/or equivalent/ higher degree.

Experience - Minimum 05 (five) years' experience with minimum two (2) years' experience in Drilling Development/ Exploratory wells, minimum one ( 1) year of rig-site experience and one ( 1) year experience of using data analytics/software solution.

Knowledge, Skills, and Abilities

Work Pattern – Rotational Job

Location – North-East

Location

North-East

Job Details

Requisition Number: 200543
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Consultant (Gurgaon, HR, IN, 122018)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience.
Working with customers, demonstrates knowledge of existing and emerging technology and product areas.
Communicates to individual clients how the use of technology solutions allow them to be more productive.
Is able to articulate and apply mainstay process for assignment delivery. As an individual contributes to project teams.
Effectively plans and manages own workload to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals. Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 5 years of experience.

Qualifications

Location

2nd Floor, Worldmark 3,, Gurgaon, Haryana, 122018, India

Job Details

Requisition Number: 200542
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Planner (Negara Brunei, BE, BN)

Job Duties

Under general supervision, creates, updates, and maintains SAP sales orders for Product Service Line (PSL) Service Coordinator.
Focuses on minimizing sales order day sales outstanding.
Support the Service Coordinators through specific processing of order to cash, plant maintenance and procurement data entry.
Responsible for daily inventory commitment and reconciliation. Troubleshoots & resolves SAP order to cash issues.
Work with resource planners in maintaining accuracy of scheduling board and the dispatching of jobs in SAP.
Work with resource planners, plant maintenance, and accounting teams to resolve scheduling issues.
Creates requisitions as required and supports processing and transfer of cost to a sales orders or MBU.
Creates standing maintenance orders to assign sundry item cost to mobile business unit (MBU).
Skills are typically acquired through a high school diploma or similar education and 2 years experience in PSL.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the quality improvement process.

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 199567
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Payroll Specialist (Bengaluru, KA, IN, 560103)

Job Duties

Under direct supervision, functions as a member of a Payroll Unit, whose primary responsibility is the processing of employee payrolls, which includes HR and Payroll data gathering, processing, accounting, internal reporting, audit, and external reporting and remittance of all applicable wages and taxes. The incumbent demonstrates a general understanding of payroll tax laws. Responsible for medium to complex projects and required to produce proper supporting documentation related to applicable payroll reports, audits, accounting, and tax filings. Responsible for the preparation of adequate documentation in support of internal controls as directed by the process guidelines. Responsible for analysis, reconciliation, and ultimate resolution of a variety of payroll issues. Actively seeks support and guidance from subject matter experts on complex queries and issues to provide resolution. Provides support to leadership and the team as required to mitigate peak volume bottlenecks. Communicates with team and answers employee questions. Provides peer training to newer team members. Takes an active part in the continuous improvement process. A high school diploma or equivalent and at least 2 years of related experience required. A Bachelors Degree is preferred.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 199582
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant - Cementing (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Requires successful completion of high school diploma or equivalent education.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: Essential Mathematics, Red Book, and Cementing 1.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the service operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
This is an entry level position in the Cementing family.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 200620
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator - Cementing (Vung Tau, 43, VN)

Job Duties

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Performs pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job.
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system.
Completes documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Assists in communicating the pre-job and on-the-job progress to customer.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Skills are typically acquired through successful completion of high school or similar education and 1 year of experience as Service Operator-Cementing I.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.
Capable of being deployed to any rig in the work area.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 200623
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator (I - II) - Baroid Separation Solutions (Fort Lupton, CO, US, 80621-8345)

Compensation Information

Compensation is competitive and commensurate with experience

Service Operator I: $17.53 - $31.55/hour
Service Operator II: $18.37 - $33.07/hour
$45/day per diem,
Position is eligible for a $300/month living stipend based out of Fort Lupton, CO
2 weeks on, 1 week off schedule *Halliburton reserves the right to adjust schedule based on industry needs.
Hotel accommodations for 60 days for employees relocating to the Fort Lupton, CO area.

Job Description

Job Duties:

Under direct supervision, rigs-up and rigs-down of service equipment, learns to complete documents, reports, and forms in support of the service performed, and may conduct training in the operation of some or all of the following equipment: shale shakers and screen changes, centrifuges, cuttings handling and slurrification systems, and vacuum and pressure washing systems.
Performs basic mathematical calculations involving addition, subtraction, multiplication, and division, and basic reading comprehension and writing skills.
This position promotes and takes an active part in the quality improvement process, promotes safety awareness and environmental consciousness, complies with all applicable safety and environmental procedures and regulations, and ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.

Qualifications:

High school diploma or equivalent is required.
A minimum of six months experience is required.
Experience operating front end loader and other heavy equipment highly preferred.
This position requires the ability to effectively communicate with others.
Basic computer skills are preferred.
Completion of specific Baroid training is preferred.
Basic mathmatical calculations highly preferred.

World Class Benefits

Medical, dental, vision, coverate in additional to life and disability insurance plans.
Paid Vacation Days, Paid Holidays and the ability to purchase additonal days off.
Retirement and Savings (401K) Plan with matching contribution.
Family Care Program including paid time off to care for sick or injured immediate family memebers, adoption reimbursement, paternal and maternal leave for baby bonding and more.
EMployee Job Referral Bonus Program.
Employee Stock Purchase Program.
Educational Assitance.

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 199593
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: 7/31/2025

Compensation Information
Compensation is competitive and commensurate with experience.

A453-ESG-Coord, HSE, Assoc (Villavicencio, MET, CO)

Job Duties

Under strict supervision from Operations Leadership, the Coordinator is responsible for implementation of health, safety and environmental policies, procedures and guidelines as instructed. Duties are likely to be within a defined project, work-site or geographic location. Assists in various activities, including but not limited to hazard identification and risk management, incident reporting, investigation and causal analysis, waste minimization, pollution prevention and control, emergency response, and various compliance activities in all areas of HSE. Assists during internal and external audits and inspections. Record-keeping and other general administrative duties are likely. Assignments are generally well defined. Requires an Undergraduate Degree in HSE, Science, or Engineering. This is an entry level position.

Qualifications

Location

Cra. 21 No.8B-36, Villavicencio, , , Colombia

Job Details

Requisition Number: 200594
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Asst I-L&P (Macae, RJ, BR, 27930-070)

Job Duties

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200717
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Technical Professional - Technical Professional-Elect/Electron (Houston, TX, US, 77032)

Job Duties

Under direct supervision, assists in the design, development and testing of electrical and/or electronic hardware and/or firmware for downhole tools and/or surface systems.
Diagnoses and troubleshoots instruments and electrical and/or electronic system problems. Services, troublshoots, repairs and/or replaces and maintains electrical and or electronic maintenance system(s).
Uses some judgement in making preliminary selections and adaptaion of engineering alternatives. May develop, test and debug firmware for microprocessor/microcontroller/DSP.
Complies with and promotes the reliability and safety practices. Comply with Halliburton HSE and service quality requirements.
Job duties, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications

Skills typically acquired through the completion of an undergraduate degree in Electrical Engineering, Electronics Engineering or similar discipline.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 198995
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

M&A Lawyer (Attorney - Counsel - Sr Counsel) (TX, US, 77032)

We are seeking a highly motivated and experienced Mergers & Acquisitions (M&A) Attorney to join our Legal team. This role will be responsible for leading and executing the legal components of strategic transactions, including global mergers, acquisitions, divestitures, and joint ventures. The ideal candidate will bring strong deal experience, exceptional drafting and negotiation skills, and the ability to collaborate effectively with internal stakeholders and external advisors. This position plays a critical role in executing high-impact transactions that directly support the company’s strategic growth and global expansion efforts.

Responsibilities:

Serve as the lead attorney on all legal aspects of global mergers, acquisitions, divestitures, and joint ventures from inception through post-closing integration.
Draft, review, and negotiate complex transaction documents, including purchase and sale agreements, confidentiality agreements, letters of intent, and transition service agreements.
Partner closely with cross-functional teams—including Corporate Development, Finance, Tax, HR, and Compliance—to provide legal guidance and ensure alignment throughout the transaction lifecycle.
Provide expert legal advice on antitrust and competition law issues, including merger control filings, and coordinate with regulators and external advisors as needed.
Manage and direct outside counsel to ensure quality, efficiency, and alignment with business objectives.
Support due diligence activities and identify and mitigate legal and regulatory risks.
Contribute to the development and continuous improvement of M&A legal processes, playbooks, and best practices.

Requirements:

Bachelor’s degree required.
Juris Doctor (JD) from an accredited law school; must be licensed and in good standing to practice law in at least one U.S. jurisdiction.
3–7 years of legal experience with a focus on M&A transactions, preferably a mix of law firm and in-house experience.
Demonstrated ability to manage multiple, high-priority transactions in a fast-paced and dynamic environment.
Strong business acumen and the ability to translate complex legal concepts into actionable, business-friendly advice.
Excellent negotiation, communication, and interpersonal skills.
Willingness and ability to travel domestically and internationally as needed.

Why Halliburton?

Halliburton’s World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays, and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

, [[city]], Texas, 77032, United States

Job Details

Requisition Number: 200806
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Legal
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Stockpoint Material Handler I-II (199829) (Montgomery, PA, US, 17752)

Job Duties

Under direct supervision, safely and effectively supports the daily stockpoint operations through mixing liquid mud, loading bulk products, and shipping and receiving pallet materials for the purpose of ensuring the delivery of quality customer service, world-class safety, and stockpoint efficiency.
Checks material orders for proper quantities.
Operates forklifts as required.

Qualifications

Skills are typically acquired through completion of a High School diploma or equivalent.
This is an entry level position.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 199829
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Downstream Account Representative (II-Principal) MultiChem - Beaumont/Port Arthur, Texas (Houston, TX, US, 77086)

This position will support our Beaumont/Port Arthur, Texas location.

Job Duties

Under general supervision, builds customer satisfaction by providing service and on-site support for the application of downstream products.
Ensures area revenue and profitability in assigned accounts while assisting in the development and implementation of sales plans for prospective customers.
Possess a working knowledge of downstream utility and hydrocarbon processes to interpret data, present information clearly, and troubleshoot potential problems.
Manage the practical application of chemical programs and serve as a technical resource to customers to optimize mechanical, operational, and chemical processes to increase equipment reliability.
Study relevant business strategy, and operational constraints to recommend new or improved chemical applications that can help customers accomplish their commercial objectives.
Collaborate with organizational support functions to meet internal Halliburton and external customer needs by actively participating in team activities and value improvement projects.
Supports site and area management in new sales campaigns.
Demonstrates adaptability and initiative to strengthen sales and service skill sets.
When necessary, performs the functions of Principal Site Service Representative.

Qualifications

Requires a STEM degree; Chemical or Mechanical Engineering, Chemistry, Biology, Geology, or Environmental Science degree preferred.
Requires 2-4 years of experience in downstream refinery, chemical, or NH3/fertilizer facilities.
Other requirements of this position include the ability to obtain a Transportation Worker Identification Credential (TWIC) for entry into downstream chemical facilities.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Downstream Account Representative II, Senior Downstream Account Representative, or Principal Downstream Account Representative.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans.
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off.
Retirement and Savings (401K) Plan with matching contribution.
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program.
Employee Stock Purchase Program.
Educational Assistance

Location

Beaumont/Port Arthur, Texas

Job Details

Requisition Number: 199899
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cable Technician I - Artificial Lift (Ross, ND, US, 58776)

Job Description

Job Duties:

Under direct supervision, performs basic operations to test and repair downhole cable for submersible pumps and motor equipment.
Receives cable and carries out basic tests.
Performs basic repairs and learns how to splice cable.
Completes paperwork to send cable to inventory or field.

Qualifications:

Requires a high school diploma or equivalent.
Must have a current and valid driver's license and a clean motor vehicle record.
Employee is expected to learn all relevant company HSE policies and procedures and to demonstrate their application into his/her duties.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13 Heidi Lane, Ross, North Dakota, 58776, United States

Job Details

Requisition Number: 200591
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator I-Slickline (Perth, WA, AU, 6164)

Job Duties

Under direct supervision, assists the Service Supervisor during all phases of providing slickline services.
Assists with pre-job product and service equipment preparation (assembly, test, mobilization) and service performance at the well site.
Assists with post-job mobilization, clean up and repair of service equipment and products.
Repairs/redresses well pressure control equipment in preparation for the next job.
Assists with process documentation as prescribed by HMS.
Applies all relevant company HSE policies and procedures in all aspects of the job.
Given the nature of oil field service work, all employees must be able to execute written and verbal instructions and effectively exchange information with peers and superiors that will increase the likelihood of job success.

Qualifications

Every employee must be able to work as an effective team member.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is also required.
Basic reading comprehension and writing skills are required as well.
Basic computer skills are preferred.
This is a development position with the expectation that all Service Operators will advance to the Service Specialist position.
Develops and demonstrates general knowledge of all slick line services and related products.
Develops and demonstrates in-depth knowledge of the slick line tools and related products provided in his/her geographic area.
Develops and demonstrates WPCE operation and maintenance knowledge and skills.
Develops and demonstrates a working knowledge of slickline unit operation (engine, drive train, and hydraulics), minor unit maintenance, and process documentation required during prepare resources, mobilization, perform services and demobilization mainstay processes.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 200738
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Rio de Janeiro, RJ, BR, 20011-000)

Job Duties

Under general supervision, understands the company&aposs business systems, business processes and controls, including policies and procedures, relative to the location and department assigned. Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues. Understands organizational structure of the company. Prepares and posts journal vouchers for accounting transactions. Researches and resolves basic accounting issues and transactions including related internal controls. Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles. Knowledge of US GAAP or country- specific accounting principles required. Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

Rua da Assembleia 66, Rio de Janeiro, Rio de Janeiro, 20011-000, Brazil

Job Details

Requisition Number: 199611
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

HR Specialist II (San Fernando, SFO, TT)

Job Duties

Under general supervision, supports the effective operation and improvement of one or more HR processes. Collaborates with stakeholders, creates tools and resources, and executes programs and projects. Develops subject matter expertise in one or more of the following disciplines: Compensation, Benefits, International HR/Global Mobility, Employee Relations, Learning and Development, Talent Acquisition, HR Information Systems, or HR Operations. Supports the efficient delivery of processes, programs and policies through the application of specialized knowledge and skills, analysis, and business acumen. Responsible for HR data reporting used to determine meaningful recommendations and actions to improve overall HR service delivery. May advise HR and business leaders across the organization on best practices. Requires an undergraduate degree in Human Resources Management, Business Administration, or a similar discipline and a minimum of 2 years of experience. Master&aposs degree and Professional HR Certification preferred.

Qualifications

Location

Coconut Drive Cross Crossing, San Fernando, , , Trinidad and Tobago

Job Details

Requisition Number: 199826
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Human Resources
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanical Design Engineer/Advisor - Open Hole Completions (TX, US, 77032)

Houston or Singapore Location

Qualifications & Responsibilities:

Experienced mechanical design engineer/advisor who has Led and Developed Openhole Packers for downhole applications
10 years of Design Engineering Experience and a minimum of 8 years in the Oil and gas industry
Must have strong knowledge of Openhole completion products for varied operating environments
Excellent understanding of API regulatory standards for API 11D1 and API 19OH in extreme high-pressure and high-temperature (HP/HT) applications
Proficiency in SolidWorks software, or equivalent, for 3-D modeling
Able to understand and explain FEA simulation and analysis
Strong candidates will possess the following skills: Adaptability, strong communication skills and leadership potential
Excellent problem-solving skills with the ability to troubleshoot tool-related issues efficiently
Lead cross-functional projects, including product and prototype validation, and provide hands-on troubleshooting when required
Development of new products for new markets or the revision/modification/repackaging of existing products to meet functional requirements
Bachelor's degree in mechanical engineering or a related field is required

Candidates having qualification that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience and skill level, a variety of job opportunities might be available

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 198978
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
PSL: Completion Tools - Technology
Full Time / Part Time: Full Time

Offshore Service Specialist - Multilateral Technology - Completion Tools (Stavanger, 11, NO, 4065)

På grunn av økende arbeidsmengde og spennende framtidsutsikter i vår Multilateral Technology avdeling søker vi etter en dedikert og service innstilt offshore operatør som kan kjenne seg godt igjen i Halliburton sine verdier; integritet, sikkerhet, samarbeid, konkurranse, kreativitet, pålitelighet og respekt.

Service Specialisten er ansvarlig for å delta i Multilateral operasjoner og må kunne samarbeide som en del av et offshore team. Service Specialsten rapporterer til Operasjonsleder for Offshore aktivitet i Multilateral Technology (MLT) avdeling. MLT er en produktlinje under Halliburton Completion Tools.

Arbeidsoppgaver:

Sikker og effektiv utførelse av MLT operasjoner offshore.
Installasjon av MLT utstyr i henhold til kjøreprosedyrer og operasjonsplaner.
Kjøring og installasjon av utstyr som Whipstock, Deflector, Junction, Casing Orienting Tool (COT), Workstring Oriantation Tool (WOT), Milling Assemblies, osv.
Bruk av HCT eCompletion som rapporteringssystem ved planlegging og installasjon.
Delta i pre- og post jobb møter i forbindelse med operasjoner.
Teknisk opplæring på verkstedet må påregnes.
Assistere verksted med klargjøring og testing av utstyr. Dette er spesielt aktuelt under opplæringsperiode.
Samarbeide med lokal onshore team vedrørende teknologinvestigering og problemløsing.

Kvalifikasjoner:

Kandidater med borerelatert erfaring foretrekkes (Rettningsboring, MWD, evt liner hanger/fisking)
De med lignende operasjonell erfaring er også oppfordret til å søke.
Bakgrunn fra elektrofag kan være fordelaktig til denne type stilling.
Kandidater må være serviceinnstilt og ha et ønske om å bidra positivt til avdelingen.
Kandidater må kunne håndtere både engelsk og norsk som arbeidsspråk.

Personlige egenskaper:

Stillingen krever at du med største selvfølgelighet følger bedriftens HMS prosedyrer, det samme gjelder også hva kommer til andre interne prosesser.

Kandidaten må ha god struktur og kunne håndtere en kompleks og hektiske situasjoner offshore. Gode samarbeidsevnver vil være avgjørende, samtidig som det vil være viktig å kunne prestere i under press ved behov.

Vi ser etter en ambisiøs kandidat med evner til å sette seg inn i tekniske detaljer. Vi er et oljeserviceselskap og ser etter deg som liker å yte service og har arbeidsglede.

Vi tilbyr:

Konkurransedyktige pensjons- og forsikringsordninger
Helseforsikring/behandlingsforsikring
Gunstig aksjespareordning
Fokus på teknologi og utvikling
Dyktige kolleger i et internasjonalt arbeidsmiljø

English version:

Due to increased activity and new opportunities we are looking for a dedicated and service minded Offshore Service Specialist to join our Multilateral Technology team. The Service Specialist will be responsible for assisting with Multilateral operations offshore and must be able to work as part of a team to ensure a successful operation. The Service Specialist reports to the Operations Team Leader for the MLT department. MLT is part of Halliburton’s Completion Tools product line.

Tasks:

Safe and effective execution of MLT operations offshore.
Installation of MLT equipment in accordance with relevant procedures and operational plans.
Running and installation of equipment such as Whipstock, Deflector, Junction, Casing Orienting Tool (COT), Workstring Orientation Tool (WOT), Milling Assemblies, etc.
Use HCT eCompletion reporting system for planning and execution of jobs.
Participate in pre- and post-job meetings for offshore operations.
Technical training onshore and in the workshop should be expected.
Assist workshop with preparation and testing of equipment. This will be particularly relevant during an initial training period.
Cooperate with the local onshore team regarding issues such as technology investigations and incident reports.

Qualifications:

Candidates with drilling related experience are preferred. (Directional Drilling, MWD, alternatively liner hanger, fishing, etc)
Candidates with other similar experience are encouraged to apply.
Electrical engineering or similar background can be beneficial to this type of role.
Candidates must be service minded and wish to provide a positive contribution to the MLT department.
Candidates should be able to speak both Norwegian and English.

Personal Qualities:

This roles demands that you are aligned with the company’s HSE processes and the expectation with regards to Service Quality.

The candidate must be able to handle hectic and critical situations offshore. Good cooperation will be an essential skill in this role as you must be able to work safely and effectively as part of a team when under pressure.

We are looking for an ambitious individual with an eye for the technical details and who wishes to perform at the highest level. We are a service company and wish to continually deliver outstanding service to our customers.

We offer:

Competitive pension and insurance arrangements
Health insurance
Discounted purchase of company stock
Focus on personal development
Technically competent colleagues in a vibrant and international environment

Place of Work:

Offshore

Product Service Line:

Completion Tools / Multilateral Technology

100% position

Contact information:
Responsible for the role:
Steffen Van der Veen (Steffen.VanderVeen@halliburton.com)
Peder Bru (Peder.Bru@halliburton.com)

Application Deadline:
20th July 2025

Procurement Specialist (Brisbane, QLD, AU, 4000)

Job Duties

Under direct supervision, plans sourcing of goods and services to support manufacturing, field operations, technology, or project management strategic plans at the plant level.
Complies with and executes Category Management strategies in accordance with policies and procedures.
Issues purchase orders in response to material requirements established by manufacturing, field operations, or projects.
Implements agreements for local procurement of goods and services not covered under Category Management.
Creates request for quotations (RFQ) and organizes competitive biddings from various suppliers to obtain the best quality, delivery, and price for goods and services.
Assesses supplier performance.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations

Qualifications

Completion of an undergraduate degree in a technical, business, or similar discipline required.
Minimum of 2 years of experience in procurement or production environment.
Advanced procurement certification preferred (CPM, etc.).
Purchase to Pay knowledge is desirable.

Location

Level 17, 444 Queen Street, Brisbane, Queensland, 4000, Australia

Job Details

Requisition Number: 200571
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Material Handler-Foreman (Mumbai, MH, IN, 400057)

Job Duties

Assists the General Foreman by providing input to identify key success factors for Material Handling crew. Provides leadership to cause the creation of organizational structure and processes required to fully execute the requirements of services and is responsible for the execution of Material Handling services, quality, subcontractor performance, and construction cost. Evaluates Material Handling service execution for compliance to contract, design data, schedule, cost budgets, and quality, advising the project team of status, issues, impacts, risk, and cost influence factors on

Qualifications

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 199886
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Hydraulic Frac Engineer (TX, US, 77905)

Job Description:

Under general supervision, provides well support for operations on location.
Collaborates with other team members and the technology, maintenance, logistics, and business development groups on solving strategic, operational, and technical problems at an area-level.
Supports new job designs, new software, and new equipment to ensure customer satisfaction.
Develops and maintains a close working relationship with the Service Leader, crew, on-sight customer, and support functions.
Requires technical and operational competence in Production Enhancement and an understanding of other Product Service Lines (PSL) at the wellsite, as well as proficiency and knowledge of basic engineering principles, continuous improvement, and project management principles.
Works independently and on group projects across the Region and may provide work direction to others at site.
Helps develop new software, leads deployment of software and new equipment, provides updates and recommendations to ensure successful rollouts.
Ensures best practices are shared across the Region.
Functions as a communications link between other DevOps groups and/or PSL Technology and the onsite operations team.
Assists with development of Associate Technical Professionals.

Qualifications:

Requires a bachelor's degree in a STEM discipline, and a minimum of 2 years of experience in PE operations/engineering.
Requires travel throughout the area.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

101 Holt Rd, Victoria, Texas, 77905-5555, United States

Job Details

Additional Locations for this position:

Requisition Number: 198273
Experience Level: Experienced Hire
Job Family: Operations
PSL: Production Enhancement
Full Time / Part Time: Full Time

Associate Consultant - Landmark (Tangerang Selatan, JK, ID, 15314)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience.
Working with customers, demonstrates knowledge of existing and emerging technology and product areas.
Communicates to individual clients how the use of technology solutions to allow them to be more productive.
Is able to articulate and apply solution for assignment delivery.
As an individual contributes to project teams.
Effectively plans and manages own workload to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals.
Requires a minimum of an undergraduate degree in science or business and a minimum of 1 years of related experience.

Qualifications

Location

Kawasan Industri & Pergudangan, Tangerang Selatan, Banten, 15314, Indonesia

Job Details

Requisition Number: 200661
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Methods Analyst (Singapore, 05, SG, 637131)

Job Duties

Job Description

This position is responsible for creating accurate and routine manufacturing sequences whereby raw materials and assemblies are processed into quality finished products using the most economical and efficient means.

Work performed requires application of standard techniques, procedures, and criteria.

Reviews prints and requirements of items to be manufactured and determines the process plans/routings, instructions, methods, procedures, tooling, etc. required.

Uses computerized files/systems to analyze production status and creates manufacturing process for parts/assembly by specifying machines to be utilized, stages of manufacture, and routing stages required to produce finished part.

Establishes standard production times for parts and/or assemblies, recommends improvements/modifications, and discusses/resolves impact of process plans with other departments as required.

Requirement:

Skills typically acquired through 2-4 years of related manufacturing experience.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200737
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Reforma Chiapas-Operations Monitoring Engineer Sr - MPD (Reforma, TAB, MX, 29500)

Job Duties

Requirements:

Petroleum Engineering, Geophysics, or similar.
10 years of experience in MPD Operations.
Experience in monitoring and supporting MPD operations.
Experience as a focal point, dealing with clients.
Advanced English proficiency.
Knowledge of onshore well and platform activities.
Promotes and takes an active part in quality improvement processes.

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 199548
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US-Houston-Technical Instructor, Ld-199413 (Houston, TX, US, 77032)

EMPLOYER: Halliburton energy services, inc.

Job Title: Technical Instructor, Ld

Job Location: 3000 N. Sam Houston Parkway East, Houston, TX 77032

Duties:

Responsibilities include: Design, develop and deliver highly technical training content for our internal and external customers to increase revenue & reduce customers potential service quality issues. Develop trainings that impact daily employee activities from building customer intimacy to developing solutions that increase customer asset value. Updates curriculum to reflect the latest industry standards and technological advancements. Collaborates with management to assess, develop and implement training and development solutions to help Product Service lines achieve specific business objectives and solutions. Domestic and international travel required 20% of the time.

Requirements: Employer will accept a Bachelor's degree in Business, Engineering or related field and 8 years of experience in the job offered or in a Technical Instructor, Ld-related occupation.

Position requires experience in the following:

Experience in drilling and completion fluids that support class delivery in multiple countries/areas.
Experience with drilling and completion fluids modeling, scale and formation water analysis software packages.
Experience in cross PSL integration, fluids design and optimization strategy.
Experience in conventional and unconventional reservoir drilling and completion strategy.
Experience in MPD & CCS drilling & completion fluids design and planning.
Experience in different well completion strategy such as; open hole completion, cased hole perforation, and fracking.
Experience in filter cake breakers & specialized lab testing.
Experience in technical writing.
Experience in utilizing SuccessFactors to provide performance analytics to the organization.

Contact:

To apply, visit jobs.halliburton.com and enter #199413 in “search by keyword” field. If offered employment, must have legal right to work in U.S. EOE, including disability/veterans.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199413
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Downstream MultiChem Account Representative (I-II) - MultiChem - Beaumont/Port Arthur, Texas (Houston, TX, US, 77086)

This position will support our Beaumont/Port Arthur, Texas location.

Job Duties

Under direct supervision, builds customer satisfaction by providing service and on-site support for the application of downstream chemical products.
Ensures area revenue and profitability in assigned accounts while assisting in the development and implementation of sales plans for prospective customers.
Develops a working knowledge of downstream utility and hydrocarbon processes to interpret data, present information clearly, and troubleshoot potential problems.
Observes, studies, and begins to manage the practical application of chemical programs.
Learns how organizational support functions work together to meet internal Halliburton and external customer needs by actively participating in team activities and projects.
Works with site and area management to discover new chemical applications for existing customers.
Demonstrates adaptability and initiative to strengthen sales and service skill sets.
When necessary, performs the functions of Principal Site Service Representative.

Qualifications

Requires completion of an undergraduate degree in a STEM discipline; Chemical or Mechanical Engineering, Chemistry, Biology, Geology, or Environmental Science degree preferred.
No previous experience in downstream refinery, chemical, or NH3/fertilizer facilities is required.
Other requirements of this position include the ability to obtain a Transportation Worker Identification Credential (TWIC) for entry into downstream chemical facilities.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Downstream Account Representative I or Downstream Account Representative II.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

Beaumont/Port Arthur, Texas

Job Details

Requisition Number: 199900
Experience Level: Entry-Level
Job Family: Sales & Marketing
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Consulting Advisor - Landmark (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under broad direction, is considered a Subject Matter Expert based on their knowledge and understanding of applicable science and technology as well as the oil and gas industry.
Partners with customers to demonstrate expert knowledge in at least one technical area or business domain.
Communicates to individual clients how the use of technology solutions improve their work processes allowing them to become more productive.
Understands and can articulate a variety of solutions (mainstay processes) which can be created and/or modified for customer need.
Has the ability to lead small or large teams and can be a direct point of contact for clients.
Effectively plans and manages work of assigned teams to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals.
Requires a completion of an undergraduate degree in geo-science, engineering, computer science or business and a minimum of 10 years of experience in IT and/or O&G Domain Consulting which includes experience in oil and gas industry.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 199014
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

K918-ESG-Tech Prof-Coiled Tubing (Neuquen, Q, AR, 8300)

Job Duties

Under general supervision, provides a total solution for our customers to include diagnosis of well problems, design solution, appropriate delivery method and evaluation plan. This role has developed technical competence in the Product Service Lines (PSL). Performs assignments requiring knowledge and application of basic engineering principles and adherence to Company policies, standards, and work methods. Works independently and provides work direction to others at wellsite. Leads full spectrum of the job, from performing pre-job planning analysis up to post job performance analysis. Functions as the liaison between customer and Operations Team. Consults cross-functionally with PSLs regarding equipment needs and specifications. Undergraduate STEM degree is required, Petroleum Engineering degree preferred. Two years of service line experience is required. Experience in Hydraulic Workover is preferred. Effectively contributes to team goals/objectives and provides guidance to less experienced team members. Responsible for peer review of job designs. Adopts and executes the Production Solutions PSL Customer Value Proposition and workflow identifying four specific skill sets: Diagnose, Design, Deliver and Evaluate. Regularly engages with peers and senior colleagues to practice, implement and gain further involvement into the four phases of the workflow.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199856
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
PSL: [[division]]
Full Time / Part Time: Full Time

Field Svc Spec, I (Coca, D, EC)

Job Duties

Under direct supervision, provides on-site supervision of Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) processes, including tool preparations, data acquisition, and delivery of the services to the customer. Ensures that data presented to the customer is accurate, timely, and meets the highest possible service quality standard. Assists in providing the customer with expected and needed data and in identifying possible problems to the customer. Assists in providing technical consultation to the customer. Properly tests all tools and equipment before, during, and after each job. Understands principles of Bottom Hole Assembly (BHA) selection and aspects of DD performance and ensures that BHA&aposs are assembled as planned including correct make-up torque, doping, and handling. Assists in accurately completing all required forms, databases, and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI). Aware of customer requirements regarding directional survey procedures. Assists in interfacing with the Remote Drilling Coordinator and/or Directional Driller (RDC-DD) to ensure BHA compatibility, planned operating parameters are within specification, and correct tool face references are applied. Participates in performance improvement initiatives. Requires completion of a high school diploma or equivalent. An undergraduate degree in a STEM discipline is required. Requires completion of the basic M/LWD and DD training programs, and a minimum of 3 months of experience in the field, preferably working as an FSS, Assoc. Must possess or be able to obtain any relevant on or offshore safety certificates.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199867
Experience Level: Experienced Hire
Job Family: Operations
PSL: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Electro/Mechanical Technician (Associate - Senior) (Alvarado, TX, US, 76009)

Job Duties

Performs routine testing/analyzing using defined and well documented/proven procedures.
Responsible for following wiring diagrams and mechanical procedures to build tools to customer requirement.
Required to follow the highest levels of safety and quality of work by complying with site-wide safety standards and global service quality minimums.
May perform routing testing or procedure modification.

Qualifications

Entry level position; works under direct supervision.
Skills typically acquired through 6 months to 1 year working in a technician training capacity.
Strong soldering experience is highly sought after.
Ability to read mechanical drawings or wiring diagrams is beneficial.
Prior experience in an electromechanical role in the aviation or oil and gas industry is recommended but not needed.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Electro/Mechanical Technician, Electro/Mechanical Technician, or Senior Electro/Mechanical Technician.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

8432 South Intersate 35W, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 199916
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL34-ESG-Procurement Specialist, Sr. (Neuquen, Q, AR, 8300)

Job Duties

Under general supervision, plans sourcing of goods and services to support manufacturing, field operations or project management. Complies with and executes Category Management strategy in accordance with policies and procedures. Creates request for quotations (RFQ) or organizes competitive biddings from various suppliers to obtain best quality, delivery and price for goods and services. Implements agreements for local procurement of goods and services not covered under Category Management. Assesses supplier performance and conducts reviews with suppliers. May be responsible for complex operations or large expenditures. May lead in the development of less experienced Procurement Specialists. Job tasks impact cost containment, efficiency, profitability or operations. Skills are typically acquired through completion of an undergraduate degree in a related field and at least 5 years of experience. Basic procurement certification preferred.

REQUIREMENTS:

Industrial, Mechanic, Petroleum, Chemistry engineering
Minimum of 5 years of experience in purchasing processes, supplier management, budget administration, competitive bidding in the Oil field tools and services and chemical sectors.
Advanced English Proficiency is mandatory
SAP ARIBA Management
Available to relocate to Neuquén, Argentina

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 199423
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Aircraft Cleaner/Ground Support Technician (Houston, TX, US, 77032-6033)

Job Duties

Clean interior & exterior of aircraft.
Stock aircraft commissary after each flight, passenger lobby and offices.
Purchase overstock commissary.
Wash some company cars and trucks.
Service ground support equipment which includes golf carts, scissor lifts, etc.
Ability to climb work stands and manlifts. Able to work at heights with safety equipment.
General shop cleaning.
Flexible schedule.

Qualifications

Skills are typically acquired through 2-5 years experience in trade.
License and certification as required.

Location

17555 JFK Blvd Ste 110, Houston, Texas, 77032-6033, United States

Job Details

Requisition Number: 199444
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Aviation
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional (Georgetown, DE, GY)

Job Duties

Bachelor's degree in mechanical, electrical Engineering or similar.
Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment.
Computer literate and proficient in MS EXCEL.
Residence in Georgetown - Guyana is mandatory
Have a “can do” attitude as well as energy and passion for learning.

Qualifications

Location

LOT 103 CHARMICHAEL STREET, Georgetown, Demerara, , Guyana

Job Details

Requisition Number: 198923
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Specialist/brønntekniker i Completon Tools- Sand Control Lower Completion (Stavanger, 11, NO, 4065)

På grunn av økende arbeidsmengde og spennende framtidsutsikter i vår Sand Control Lower Completion avdeling, søker vi etter proaktive og teknisk dyktige brønnteknikere, med utmerket brønnforståelse som kan kjenne seg godt igjen i Halliburton sine verdier; integritet, sikkerhet, samarbeid, tillit og respekt.

Brønnteknikerne er våre representanter offshore, og Halliburtons ansikt utad på installasjoner og rigger i Nordsjøen. Sammen med kolleger, kunder og konkurrenter jobber de sammen for å installere brønnkomponenter i brønnen på en sikker, pålitelig og effektiv måte.

Arbeidsoppgaver:
Du vil være ansvarlig for operasjonen offshore, fra mottak av utstyr, til lower completion er installert i brønn, brønnverktøy demobilisert og erfaringer dokumentert. Du må kunne samarbeide og bidra på tvers av produktlinjer både internt og eksternt, for å sikre sømløse og effektive leveranser til våre kunder.

Delta på pre- og post jobbmøter onshore.
Mottak, utsjekk og kvalitetskontroll av utstyr offshore.
Sikker, pålitelig og effektiv utførelse av lower completion operasjoner offshore.
Teknisk støtte til våre kunder offshore.
Det forventes at våre brønnteknikere kryss-trenes og utvikler kompetanse innen flere av produktlinjene i Completion Tools.
Arbeid på kontor/verksted ved behov kan være aktuelt ved behov.

Kvalifikasjoner:

Kandidaten må ha operasjonell offshore erfaring og bør ha fagbrev som brønntekniker.
Erfaring med Sand Control – lower completion, relevante nedihullsoperasjoner og/eller gruspakkingoperasjoner er et krav.
Kandidater må kunne håndtere både engelsk og norsk som arbeidsspråk.
Gyldig GSK Grunnleggende sikkerhets- og beredskapskurs.
Godkjent offshore helseattest.

Personlige egenskaper:

Stillingen krever at du med største selvfølgelighet følger bedriftens HMS prosedyrer, det samme gjelder også hva kommer til andre interne prosesser.

Kandidaten må ha god struktur og kunne håndtere komplekse og utfordrerne situasjoner på en god måte. Utmerkede kommunikasjons- og samarbeidsevner er også viktig for å kunne prestere i et godt samarbeidsmiljø.

Vi ser etter kandidater som er nøyaktig, fleksibel, og evner til å sette seg inn i tekniske detaljer, vi er et oljeserviceselskap og ser etter deg som liker å yte service og har arbeidsglede.

Vi tilbyr:

Konkurransedyktige pensjons- og forsikringsordninger
Helseforsikring/behandlingsforsikring
Gunstig aksjespareordning
Fokus på teknologi og utvikling
Dyktige kolleger i et internasjonalt arbeidsmiljø

English version:

Due to increasing workload and an exciting outlook in the Sand control Lower Completion department, we are looking for proactive and technically strong service specialists who identifies with Halliburton’s values; Integrity, Safety, Creativity, Trust and Respect.

The service specialists are our representatives offshore, and Halliburton’s public face on platforms and rigs in the North Sea. Together with colleagues, customers and competitors, they collaborate closely to install various well components in a safe, reliable and efficient manner.

Work Tasks:

You will be responsible for the operation offshore starting with reception of the equipment, installation of lower completion, demobilization of service tools, and ending with completion of final reporting. You are expected to collaborate and contribute across the product lines both internally and externally to ensure seamless and efficient service deliveries to our customers.

Participate in pre- and post-job meetings onshore.
Reception, checkout and quality control of equipment offshore.
Safe, reliable and efficient execution of lower completion operations offshore.
Technical support to our customers offshore.
It is expected that our service specialists do x-train, and develop competencies across the service lines in Completion Tools.
Work onshore at the office or in the workshop can be required.
Experience as a mechanical technician will be preferred.

Qualifications:

Candidates need to have operational offshore experience and should have a trade certificate.
Sand control, relevant downhole, gravel pack operations experience is required.
Able to handle both English and Norwegian as working language.
Valid GSK-Basic Safety and Emergency Course approved by NOG.
Valid Offshore health certificate

Personal qualities

The position requires that you champion the Company's HSE procedures, and other internal processes.

The candidate must have good organizational skills and be able to handle complex and challenging situations in a good way. Excellent communication and collaboration skills will be important to perform in a collaborative working environment.

We are looking for thorough and flexible candidates, with the ability to dig into technical details. As an oil service company, we are looking for candidates who can provide superior service and enjoy your work.

We offer:

Competitive pension- and insurance scheme
Company health service
Beneficial employee stock-purchase plan
Focus on technology and further development
Highly skilled colleagues in an international environment

Location:

Offshore

Product Service Line:

Completion Tools / Sand control Lower Completion

100% position

Contact Persons:

Hiring Manager: Steffen Van der Veen, steffen.vanderveen@halliburton.com

Deadline:
20th July .2025

Cement Land Operator Assistant II - Service Operator II (199988) (Lafayette, LA, US, 70508)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Understands hazardous materials, job, wash up and discharge procedures.
Verifies correct line up of valves on bulk systems and surface manifold equipment.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.

Qualifications

Skills are typically acquired through successful completion of high school or similar education and 0-6 months of experience as an Operator Asst-Cementing I.
Licensure to drive commercial equipment is required.
May require I-Learn courses: Cementing II and Service Tools I.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

100 South Park, Lafayette, Louisiana, 70508, United States

Job Details

Requisition Number: 199988
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Permian BD Technology Manager (Midland, TX, US, 79701)

Job Duties

Responsibilities:
• This role is exclusively part of the Business Development Technical Teams within the North America Regions.
• Under broad direction, provides technology leadership in support of engineering and sales activities.
• The profitability of Halliburton and the assigned client base is maximized through technology, field studies, cross-PSL applications, integrated solutions, reservoir simulations, and superior sales abilities.
• Decisions and recommendations are recognized as authoritative and have a far reaching impact on engineering, sales, and related company activities.
• Responsible for developing and maintaining profitable relationships with both existing clients and potential customers.
• Understands and promotes HES's quality directives. Possesses broad understanding of business aspects and associated technology of the product service lines.
• Manages performance and salaries of staff by hiring, conducting performance appraisals, coaching and mentoring for career and skills development, and arranging training.

Qualifications:
• Skills are typically acquired through an undergraduate degree in Electrical, Mechanical, Material Science, Computer Science, Engineering or equivalent degree, and minimum of 13 years of experience in Product Service Line (PSL) field operations, Business Development, or Engineering which includes management experience.
• Incumbents at this level will usually hold a certification as a Licensed/Chartered Professional Engineer.
• Must be exceptionally astute about oil and gas technology, should be current on the complete portforlio of Halliburton technologies.
• Should be a good personal relationship builder, communicator and motivator with an open mind and optimistic outlook.
• Reasonable knowledge of common and local industry contracting standards, financial planning and analysis skills.

Candidates with qualifications exceeding the minimum job requirements will be considered for higher-level positions based on their experience, additional job requirements, and current business needs. Depending on their education, experience, and skill level, candidates may be eligible for a range of job opportunities, including positions ranging from Technical Business Development Manager to Technical Business Development Sr. Manager.

Qualifications

Location

125 W Missouri - Suite 300, Midland, Texas, 79701, United States

Job Details

Requisition Number: 199830
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Specialist II - Service Leader - Artificial Lift (Weyburn, AB, CA, S4H 2K8)

Job Description

Job Duties:

Under broad direction, performs Artificial Lift (AL) installations and pulls, checks, and troubleshooting.
Provides instruction and technical support to customer personnel in the proper handling and operating procedures of ALs.
Performs well production analysis and repair of AL equipment and understands how specific well conditions can impact pump performance.
Tests, splices, and repairs cable and assists in service center operations as necessary.
Prepares paperwork to include IFTA reports, billable and non-billable hours, and mileage.
Trains and coach's new hires in basic principles.
Promotes safety awareness and environmental consciousness and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Trains and mentors lower-level technicians at the well site.

Qualifications:

High school diploma or equivalent required.
4+ years of experience in artificial lift operations required.
SAGD installation experience preferred.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Class 5 non-GDL driver's license required and ability to provide copy of drivers abstract.

Location

1375 Cotueau Avenue W, Weyburn, Saskatchewan, S4H 2K8, Canada

Job Details

Requisition Number: 199721
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

BD09-ESG-Fld Svc Rep-Drilling Fluids II (Neuquen, Q, AR, 8300)

Job Duties

Under general supervision, provides well site service to customers. Applies content learned through the formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and well site service delivery. Conducts and interprets results of routine and specialized testing in order to provide technical solutions. Operates separation and waste management equipment and demonstrates understanding of the affect on overall fluid performance. Works directly with both fluids and equipment supervisors and technical professionals. Demonstrates knowledge of company products and services, rig operations; fluids, separation, and waste management technologies and related processes. Performs in a professional manner as a Halliburton representative, maintaining a good working relationship with the operator&aposs representatives and rig personnel. Demonstrates the ability to adequately prepare and track inventory of Baroid products and equipment spares at the rig site based on the drilling program and anticipated conditions. Complies with health, safety and environment regulations in all aspects of job performance. High school diploma or equivalent required. Completion of a Bachelor&aposs Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor&aposs Degree program is preferred. This position requires completion of the Baroid Core Training Course at Halliburton or other industry recognized program, and 6 months related experience.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 198300
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
PSL: [[division]]
Full Time / Part Time: Full Time

K918-ESG-Tech Prof-Coiled Tubing (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199862
Experience Level: Experienced Hire
Job Family: Operations
PSL: [[division]]
Full Time / Part Time: Full Time

Downstream MultiChem Account Representative (I-II) - MultiChem - Corpus Christi, Texas (Houston, TX, US, 77086)

This position will support our Corpus Christi, Texas location.

Job Duties

Under direct supervision, builds customer satisfaction by providing service and on-site support for the application of downstream chemical products.
Ensures area revenue and profitability in assigned accounts while assisting in the development and implementation of sales plans for prospective customers.
Develops a working knowledge of downstream utility and hydrocarbon processes to interpret data, present information clearly, and troubleshoot potential problems.
Observes, studies, and begins to manage the practical application of chemical programs.
Learns how organizational support functions work together to meet internal Halliburton and external customer needs by actively participating in team activities and projects.
Works with site and area management to discover new chemical applications for existing customers.
Demonstrates adaptability and initiative to strengthen sales and service skill sets.
When necessary, performs the functions of Principal Site Service Representative.

Qualifications

Requires completion of an undergraduate degree in a STEM discipline; Chemical or Mechanical Engineering, Chemistry, Biology, Geology, or Environmental Science degree preferred.
No previous experience in downstream refinery, chemical, or NH3/fertilizer facilities is required.
Other requirements of this position include the ability to obtain a Transportation Worker Identification Credential (TWIC) for entry into downstream chemical facilities.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Downstream Account Representative I or Downstream Account Representative II.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

Corpus Christi, Texas

Job Details

Requisition Number: 199901
Experience Level: Entry-Level
Job Family: Sales & Marketing
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&M (Repair & Maintenance) Mechanical Technician (Vung Tau, 43, VN)

Job Duties

Under strict supervision, performs repairs, preventative maintenance, calibration, and inspections on down-hole tool and other equipment used in the application for down-hole tools.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Areas of specialization may include: mechanical aptitude, interpretation of drawings/schematics, use of precision measurements, computer skills, assembly and disassembly of tools associated with down-hole equipment.
Requires a high school diploma, or equivalent, and a technical school certificate or higher is preferred.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 199716
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

SW01-ESG-Op Asst-Surface Well Testing, I (Barrancabermeja, SAN, CO)

Job Duties

Under strict supervision, assists during the rigging up and down of Surfce Well Testing (SWT) service line equipment on work locations for the purpose maintaining control and the processing of wellbore fluids during well testing operations and providing the customer with essential reservoir information by the use of (but not limited to): Surface Well Testing and Surface Pressure Control equipment packages. Learns basic Testing & Subsea (Surface Well Test) operations to include (but not limited to): completion of Job Safety Analysis (JSA) paperwork, performing and completing preventative maintenance procedures, maintaining and operating Testing & Subsea (SWT) equipment, use of Personal Protective Equipment (PPE), Journey Management, Job Safety Analysis (JSA&aposs), Permit to Work System (PTW), Hazard Observation Check (HOC Cards), Toolbox Meetings, Safety Huddles, Local Area requirements, and completing Testing & Subsea training requirement programs. Receives instruction on navigation and use of HMS, iLearn and Competency sites on HalWorld. Works in the Testing & Subsea workshop assisting in the repair and maintenance of Surface Well Test equipment. Assists in assembly and preparation of equipment for installation and service. Assists in the running of a job and in the clean up, repair, and preparation for the next job. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically acquired through completion of high school or similar education. Must have successfully passed company tests or met task guideline requirements. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Licensure to drive commercial vehicles may be required. This is the entry level position.

Qualifications

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 199670
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Accountant - External/SEC Reporting (Houston, TX, US, 77032)

Senior Accountant Position Overview

The Senior Accountant, External/SEC Reporting position serves a critical role in ensuring the accurate and timely delivery of external financial information for Halliburton. Position works closely with the Investor Relations department to support the preparation of earnings releases, Corporate presentations and other material presented to securities analysts, investors and industry groups.

Responsibilities and Essential Duties:

Successfully collaborate with the External Reporting team to ensure completion of tasks and responsibilities
Compile and prepare analyses, schedules, and data for the Company’s 10-Q/K filings, utilizing SEC filing software (Workiva), as well as provide some detail reviews
Prepare the Company’s Earnings Release (8-K) and/or Earnings Call Script on a quarterly basis, including supporting workpapers
Perform, research, and resolve activities involving complex accounting reports with associated accounting analyses and related internal controls
Interact and communicate with other departments and business units to resolve financial related issues
Create, update, and/or review supporting schedules for the preparation of financial statements and disclosures
Prepare disclosure checklists under generally accepted accounting principles in the United States (GAAP) and other applicable standards, such as MD&A
Participate in the completion of eXtensible Business Reporting Language (XBRL) for SEC filings utilizing Workiva
Assist in the review of Company’s Proxy and other public presentations such as press releases and investor presentations
Coordinate audit requests with external and internal auditors
Initiate and/or participate in other routine and non-routine functions as requested by management, including ad-hoc requests, various government surveys, process improvements, and ongoing projects
Minimum of three (3) years of experience in accounting related roles required. Requires completion of an undergraduate degree in accounting, business, or related field. Knowledge of US GAAP or country-specific accounting principles required
CPA license (at minimum actively pursuing or parts passed)

Qualifications

Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of five (3) years of experience in accounting related roles
Experience with preparation of SEC filings required
Willingness to work overtime, as necessary, during filing periods to meet deadlines
Ability to work independently under general guidance
Proficient in Microsoft Word, Excel and Adobe Pro
Knowledge of US GAAP and SEC Reporting

Skills:

Self-starter
Attention to Detail
Organized and able to manage multiple activities in a timely and accurate manner with general supervisory guidance
Strong oral and written communication skills with an ability to collaborate successfully with team members and others in the organization

A plus, but not required:

Workiva experience highly preferred
Large or global company experience
Previous industry and public accounting experience
CPA license (at minimum actively pursuing or parts passed)
XBRL knowledge
HFM/SAP/Essbase

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199376
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

AL30-ESG-Tech Prof-Artificial Lift, Asso (Siberia, CUN, CO)

Job Duties

Under direct supervision, assists in Artificial Lift proposal development, Artificial Lift application recommendations and post-well evaluation of Artificial Lift performance. Uses engineering design principles to design, recommend, and evaluate artificial lift systems. Provides basic technical and operational assistance, primarily to internal customers (business development and field operations). Performs assignments that require knowledge and application of basic engineering principles, basic artificial lift technology and basic processes. Participates in developmental programs to accelerate learning. Completion of an undergraduate degree in Engineering or Science required.

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200484
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sperry LWD Associate Field Professional - Field Professional II (Broussard, LA, US, 70518)

Job Duties

Under strict supervision, provides on-site supervision of the Logging- While-Drilling (LWD) process, including tool preparations, data acquisition, log generation and Quality Control (QC) and delivery of the services to the customer.
Responsibilities are to learn the job role for the LWD service line.
Serves as a thrid man in a sub-ordinate role.
Provides technical and operational expertise to external customer.
Performs assignments requiring knowledge and application of basic engineering and measurement while drilling principles.
Maintains equipment inventory and supervises movement to and from well site.
Check equipment and advises repair requirements.
Maintains computer database for on-going jobs, prepares job ticket, daily reporting and end-of-well reports.
Skill acquired through completion of the basic M/LWD training program.

Qualifications

Requires completion of a high school diploma or equivalent, and no previous experience.
Bachelor's Degree in a STEM discipline is preferred.
Must have successfully passed company tests, or met task guideline requirements.
Ability to demonstrate technical aptitude to required standards.
Must possess good communication, arithmetic, data entry and recording skills.
Requires ability to read and interpret formation well logs and interpret directional survey information and other well site data.
Must possess relevant on and offshore safety certificates.
This is the entry level position for the LWD job family.
This is an offshore field position.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including LWD Field Professional I or LWD Field Professional II.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4607 Hwy 90 E, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 200152
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

ZZ01-ESG-Operator Asst I-Cementing (Villavicencio, MET, CO)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment. Learns the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifold equipment, and cementing plug releasing tools. Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Requires successful completion of high school diploma or equivalent education. Licensure to drive commercial equipment may be required. May require I-Learn courses: Essential Mathematics, Red Book, and Cementing 1. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. This is the entry level position into the service operator job family. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. This is an entry level position in the Cementing family.

Qualifications

Location

Cra. 21 No.8B-36, Villavicencio, , , Colombia

Job Details

Requisition Number: 199560
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant II - Cementing (Evansville, WY, US, 82636)

***$1,000 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience.

Potential Annual Earnings: $89,000+/yearly
- Average annual earnings are an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Casper, WY.
$45/day Per Diem
2 weeks on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs.*

Job Description

Job Duties:

Under supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, and rigging-up appropriate data monitoring equipment
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports
Verifies correct line up of valves on bulk systems and surface manifold equipment
Understands hazardous materials, job, wash up and discharge procedures
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

High school diploma or equivalent required
Must have 3-6 months of experience as Operator Assistant I – Cementing or 1 year of related work experience in oilfield services
Class A CDL preferred with manual transmission experience.
Class A CDL permit preferred prior to start date
Must be able to obtain a Class A CDL within 90 days after start date. Halliburton will enroll employees into a class to obtain a CDL
Manual transmission experience preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Completion of Operator Assistant I – Cementing competencies, or similar level of competence from previous industry experience
Able to lift 60 lbs
Able to communicate effectively with others
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long workdays, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

6900 Nugget Rd, Evansville, Wyoming, 82636, United States

Job Details

Requisition Number: 199025
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Estágio Contabilidade - Rio de Janeiro (Capital) (Rio de Janeiro, RJ, BR, 20011-000)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199630
Experience Level: Co-op
Job Family: Support Services
PSL: Finance
Full Time / Part Time: Part Time

R&M Electrical Tech I (Chengdu, TJ, CN, 610000)

Job Duties

Under strict supervision, performs repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS or M/LWD sensors. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of tools associated with PSL equipment, or Measure while drilling and/or Logging While Drilling down-hole tools. Requires a technical school certificate, or equivalent. An associate degree or higher is preferred.

Qualifications

Location

Unit 2102, Yanlord Building, Chengdu, Sichuan, 610000, China

Job Details

Requisition Number: 199565
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Administrative Specialist - Senior Administrative Specialist - Baroid Mines (Belle Fourche, SD, US, 57717)

Job Description

Job Duties:

Under general supervision, works within a specialized function with work verified on an as needed basis.
Performs routine administrative functions such as typing, filing, coding, sorting, and/or verification.
Reads and interprets documents such as safety rules, operating and maintenance instructions, procedure manuals, and service orders.
Writes routine reports and correspondence.
Manages purchasing processes for both the plant and mine operations to include invoice coding, service entry, requisitions, purchase orders, credit card purchasing, and statement reconciliation through SAP Concur.
Coordinates with vendors regarding lead times, price fluctuations, and product availability to optimize purchasing strategies.

Qualifications:

High school diploma or equivalent required.
Requires ability to speak effectively with groups of customers or employees of organization.
Able to operate multiple phone lines
Experienced in Microsoft Office Suite (Word, Excel, Outlook, Teams).
SAP experience preferred.
Railcar ordering experience preferred.
Requires ability to perform basic numerical, statistical, and/or financial analysis.
Applies common sense understanding to carry out detailed but uninvolved written or oral instructions.
Requires 4-5 years of experience.

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

554 US Highway 212, Belle Fourche, South Dakota, 57717, United States

Job Details

Requisition Number: 199132
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A427-ESG-Intern (Ciudad de Buenos Aires, B, AR, C1004AAH)

Job Duties

Estudiantes del último año de carreras de Ingeniería Química, Industrial o carreras afines.

Nivel de Inglés avanzado

Interés en adquirir experiencia laboral en el sector energético

Tener una actitud de "se puede hacer", así como energía y pasión por aprender

Promueve los estándares de HSE de la compañía, cumpliendo con todos los procedimientos y reglamentos ambientales y de seguridad local

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199166
Experience Level: Entry-Level
Job Family: Support Services
PSL: [[division]]
Full Time / Part Time: Full Time

Operator Assistant I-Cementing (Perth, WA, AU, 6164)

Job Duties

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.

Qualifications

Requires successful completion of high school diploma or equivalent education.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: Essential Mathematics, Red Book, and Cementing 1.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the service operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
This is an entry level position in the Cementing family.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 200789
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor-Coiled Tubing (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite. Plans and performs necessary calculations for the total job at the well site as needed. Coordinates and directs the activities of subordinate supervisors, service operators and operator assistants during the equipment rig up and rig down on a location and the preparation of equipment for performing a job. Provides planning necessary for the job including instructions to the crew and dispute resolutions to approved levels. Ensures customer satisfaction with jobs performed. As needed, may perform data collection and data distribution on jobs. Coordinates the clean up, repair, and preparation of equipment for the next job. Provides input on individual performance levels of his/her subordinates providing on-the-job skills development to enhance job performance. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills are typically acquired through completion of HAL career development requirements as Service Supervisor l. Must possess exceptional skills within the service line and have a general understanding of other service functions. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Promotes safety awareness and environmental consciousness. Ensures compliance with Health, Safety, and Environmental (HSE) standards, practices and guidelines. Must posses execellent knowledge of Halliburton Management System (HMS) standards, work methods and processes. Licensure to drive commercial vehicles may be required. Promotes and takes an active part in quality improvement processes. Must possess the ability understand to Well Bore schematic, analyze computer programs (IWI) and operational procedures. Basic computer skills are preferred. Must possess good leadership and negotiating skills.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 198898
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

CC06-ESG-Svc Spec II-Completions (Coca, D, EC)

Job Duties

Under general supervision, oversees the installation of a wide range of well completion products required in a geographic area. Typically operates as a one-person crew. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction. Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose. Performs all aspects of the job in compliance with HMS processes. Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Demonstrates knowledge of pre and post-job product and service activities employee&aposs ongoing participation in these pre and post-job processes will vary by location). Properly maintains assigned equipment and ensures compliance with safety regulations and procedures. Interacts with third parties whose activities could impact the process of installing completion products to assure proper coordination. Trains Service Operators and/or Service Specialists in areas of expertise. Conducts and documents all Halliburton HSE related activities at the well site-site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor. Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations. Promotes and takes an active part in the quality improvement process. Develops his/her knowledge and skills to be able to run the most complex, and/or the broadest range of, HES offerings under the most challenging conditions. Develops mentoring and competency assessor skills. This level may be attained by developing the ability to provide a broader range of CPS products and services or by expanding ones expertise into other PSL&aposs.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200352
Experience Level: Experienced Hire
Job Family: Operations
PSL: Completion Tools
Full Time / Part Time: Full Time

Cement Service Supervisor I-III (200758) (Lafayette, LA, US, 70508)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.

Qualifications

Skills are typically acquired through a high school diploma, or similar education and,
One year of experience as Service Operator-Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Candidate must meet the minimum developmental standards for this job classification.
Has necessary working skills within the service line and a general understanding of other service functions.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

100 South Park, Lafayette, Louisiana, 70508, United States

Job Details

Requisition Number: 200758
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

CC03-ESG-Svc Operator I-Completions (Neuquen, Q, AR, 8300)

Job Duties

Under general supervision, assists the Service Specialist in installing well completion products. Assists with pre-job product and service equipment preparation (assembly, test, mobilization), and with product installation at the well site. Assists with post-job mobilization, clean up and repair of service equipment and products. Assists with process documentation as prescribed by HMS. Given the nature of oil field service work, all employees must be able to execute written and verbal instructions and effectively exchange information with peers and superiors that will increase the likelihood of job success. Every employee must be able to work as an effective team member. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are preferred. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. This is a development position with the expectation that all Service Operators will advance to the Service Specialist position. Develops and demonstrates general knowledge of all of the products and services included in the CPS product line. Develops and demonstrates in-depth knowledge of the least complex completion products and services provided in his/her geographic area. Develops and demonstrates a working knowledge of process documentation required during prepare resources, mobilization, perform services and demobilization mainstay processes.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200611
Experience Level: Experienced Hire
Job Family: Operations
PSL: [[division]]
Full Time / Part Time: Full Time

DB05-ESG-Svc Spec -DBS, I (Coca, D, EC)

Job Duties

Under general supervision, coordinates the work of Operator Assistants and Service Operators at the job site. Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp. Assist in providing technical, operational and practical expertise to development and operations technology projects. Obtains pertinent service work information from the customer and effectively communicates appropriate information to assigned worksite staff. Trains and provides guidance to Service Operators and Operator Assistants in the proper performance of pre-trip and post-trip vehicle and equipment inspections and associated paperwork and/or reports. Trains Service Operators and Operator Assistants in the rig operation relative to assembly, operation, and maintenance of equipment. Completes appropriate documents, reports, and forms that affect the financial results of the business unit, (field ticket, etc.). Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through successful completion of high school diploma or similar education. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Must be knowledgeable of HMS standards and guidelines for PSL personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.

Qualifications

Location

Kilometro 5 Via Lago Agrio, Coca, Coca, , Ecuador

Job Details

Requisition Number: 199876
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Drill Bits and Service
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator I - Cementing (Duncan, OK, US, 73536)

Job Duties

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies
Learns to perform pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined

Qualifications

Requires completion of a high school diploma or equivalent
6 months of experience as an Operator Assistant II-Cementing; Completion of Operator Assistant II – Cementing competencies, or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes
A passing score on job-related tests or meeting task guidelines is required

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

215 East Bois D'Arc, Duncan, Oklahoma, 73536, United States

Job Details

Requisition Number: 198156
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator II - Cementing (Victoria, TX, US, 77905-5555)

Job Duties

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Performs pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system
Completes documents, reports, and forms related to the cementing service performed
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: Cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Assists in communicating the pre-job and on-the-job progress to customer
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

Requires completion of a high school diploma or equivalent
1 year of experience as Service Operator I - Cementing or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
A passing score on job-related tests or meeting task guidelines is required
Capable of being deployed to any rig in the work area

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

101 Holt Rd, Victoria, Texas, 77905-5555, United States

Job Details

Requisition Number: 198200
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Engineer-L&P Cased Hole (Associate to Senior) (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under direct supervision, assists in the preparation and execution of Cased Hole logging services on location in accordance with HMS
This is the entry level position for this discipline and will train directly under the supervision of an appropriate frontline leader or a competent Field Professional assigned by the frontline leader to gain knowledge of operations
Assists in checking equipment prior to and after logging operations
Gains familiarity with Surface System and Cased Hole tools through field work under mentorship
Promotes and ensures compliance with Health, Safety and Environment (HSE) and Service Quality (SQ) standards, practices and guidelines

Requirements:

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 198965
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Técnico de Laboratorio de Estimulaciones - Ciudad del Carmen, Campeche, MX (Ciudad del Carmen, CAM, MX, 24140)

Job Duties

Sigue las normas y reglamentos de seguridad establecidos al realizar sus funciones. Realiza tareas para llevar a cabo pruebas de laboratorio rutinarias según procedimientos establecidos o que requieren la selección de equipos/instrumentos de prueba. También puede construir prototipos, modelos y equipos especiales y/o realizar pruebas básicas de materiales o ambientales utilizando técnicas básicas con equipos eléctricos/electrónicos, químicos y mecánicos, que incluyen configuración, calibración, solución de problemas, monitoreo y recopilación de datos. Opera equipos de laboratorio u otros equipos como bombas y equipos de perforación, según sea necesario para ejecutar las tareas asignadas. Documenta los datos de prueba con fines de reporte. Mantiene archivos y documentación relacionada con los equipos de prueba y los resultados obtenidos. Las tareas del puesto, si se realizan correctamente, impactan indirectamente en el control de costos, eficiencia, rentabilidad u operaciones.

Qualifications

Requisitos:

Técnico o Técnico Superior Universitario en Quimica, Petroleo, o afin.
Experiencia mínima: 2 años en laboratorio de estimulaciones.
Experiencia en corrida de pruebas.
Manejo y mantenimiento (calibracion) a equipos e instrumentacion de laboratorio.
Dominio de Microsoft office (excel, base de datos).
Dominio de flujos de trabajo integrados entre laboratorio y operaciones.
Comunicacion efectiva y trabajo en equipo.
Radicar en Ciudad del Carmen, Campeche.

Location

Calle 6 Sur num Ext 2 Int 2A, Ciudad del Carmen, Campeche, 24140, Mexico

Job Details

Requisition Number: 200755
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Técnico de Laboratorio de Estimulaciones (Cunduacan, TAB, MX, 86693)

Job Duties

Qualifications

Requisitos:

Técnico o Técnico Superior Universitario en Quimica, Petroleo, o afin.
Experiencia mínima: 2 años en laboratorio de estimulaciones.
Experiencia en corrida de pruebas.
Manejo y mantenimiento (calibracion) a equipos e instrumentacion de laboratorio.
Dominio de software: Microsoft office (excel, base de datos).
Dominio de flujos de trabajo integrados entre laboratorio y operaciones.
Comunicacion efectiva y trabajo en equipo.
Radicar en Paraiso, Tabasco o cercanias.

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200753
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Ingeniero de Estimulaciones, Sr (Reforma, CHP, MX, 29500)

Job Duties

Under general supervision, works with customers to develop technical solutions for subsurface problems during job planning and execution. Presents solutions to stakeholders based on subsurface knowledge. Ability to utilize stimulation design software to develop and provide assistance for fracturing treatment designs in a given area. Aids in job execution by providing on location technical support. Works on value add projects for both internal and external customers based on technical knowledge and developments. Projects may incorporate multi PSLs. Works alongside technology and operations team to aid in technology roll outs and development. Provides assistance to Business Development team to address technical needs of customers. Works with Supply Chain to guide inventory decisions with a focus on cost and DOI efficiencies. Must be able to work independently. Assists with management and development of Associate Technical Professionals and Tech Professionals. Skills typically developed as a Technical Professional and completion of courses focused on reservoir and formation evaluation, well completion strategies, and well performance analysis. This is a field based role with exposure to Business Development and additional roles in PE Operations. Knowledge in multi PSL operations preferred. Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline and at least 3 years of PE operations / engineering experience are required.

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 200706
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operador Especialista - UAP (Reforma, TAB, MX, 29500)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite. Plans and performs necessary calculations for fluids management at the well site as needed. May coordinate the activities of service operators during equipment rig up, rig down, and the preparation of equipment for performing a job. Ensures customer satisfaction with work performed. Performs data collection and data distribution on jobs as needed. Responsible for conducting pressure pumping operations, such as spotting acid and other fluids, in accordance with job design parameters safely and consistently in accordance with the job plan. Coordinates the clean up, repair, and preparation of equipment for the next job. Utilizes competency processes to enhance own skills development and job performance. Job tasks, correctly performed, impact indirectly on cost containment, efficiency and profitability of operations. Must possess exceptional skills within the service line and have a general understanding of other service functions. Must be knowledgeable of HMS, HSE standards, work methods and guidelines. Promotes and contributes to safety awareness and environmental consciousness. Promotes and takes an active part in quality and continuous improvement processes. Skills are acquired through 1.5 years of experience and completion of required competencies for current and next level. Requires completion of a high school diploma or equivalent.

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 200708
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operador II, Estimulaciones - Offshore (Cunduacan, TAB, MX, 86693)

Job Duties

Bajo supervisión directa, realiza los cálculos necesarios para la verificación de la calidad de los fluidos en el sitio del pozo según sea necesario. Realiza el aparejo de equipo hacia arriba y hacia abajo en una ubicación y prepara el equipo para realizar un trabajo. Asegura la satisfacción del cliente con el trabajo realizado. Responsable de las operaciones de los sistemas de fluidos de premezcla y de la gestión del inventario de productos químicos en el sitio del pozo. Responsable de la calidad de los fluidos durante la prestación de los servicios de acuerdo con el diseño del trabajo y los KPIs del cliente. Realiza la recopilación y distribución de datos en los trabajos según sea necesario. Coordina la limpieza, reparación y preparación del equipo para el próximo trabajo. Utiliza procesos de competencia para mejorar el desarrollo de habilidades de los empleados y el rendimiento laboral. Debe poseer habilidades excepcionales dentro de la línea de servicio y tener una comprensión general de otras funciones de servicio. Debe tener conocimiento de los estándares HMS y HSE. Promueve y contribuye a la conciencia de seguridad y conciencia ambiental. Promueve y participa activamente en los procesos de calidad y mejora continua.

Qualifications

Tecnico o Tecnico Superior Universitario en areas afines a la industria petrolera.
Experiencia de 3 años comprobables en estimulaciones acidas y no acidas en operaciones costa fuera (barcos estimuladores).
Operacion y mantenimiento de equipos como bombas de alta presion, equipo de mezclado, bombeo de nitrogeno.
Es un plus contar con experiencia en operar equipos de arena apuntalada.
Es un plus contar con experiencia en IOC's.
Disponibilidad de movilidad y/o radicar en la zona de Cunduacan, Tab.

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200718
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operador II, Estimulaciones - Offshore (Cunduacan, TAB, MX, 86693)

Job Duties

Qualifications

Requisitos:

Tecnico o Tecnico Superior Universitario en areas afines a la industria petrolera.
Experiencia de 3 años comprobables en estimulaciones acidas y no acidas en operaciones costa fuera (barcos estimuladores).
Operacion y mantenimiento de equipos como bombas de alta presion, equipo de mezclado, bombeo de nitrogeno.
Es un plus contar con experiencia en operar equipos de arena apuntalada.
Es un plus contar con experiencia en IOC's.
Disponibilidad de movilidad y/o radicar en la zona de Cunduacan, Tab.

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200757
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Especialista Estimulaciones - Offshore (Cunduacan, TAB, MX, 86693)

Job Duties

Bajo supervisión general, promueve excelentes relaciones con los clientes en el lugar de trabajo. Planifica y realiza los cálculos necesarios para la gestión de fluidos en el sitio del pozo según sea necesario. Puede coordinar las actividades de los operadores de servicio durante el montaje y desmontaje del equipo, y la preparación del equipo para realizar un trabajo. Asegura la satisfacción del cliente con el trabajo realizado. Realiza la recopilación y distribución de datos en los trabajos según sea necesario. Responsable de llevar a cabo operaciones de bombeo a presión, como la detección de ácido y otros fluidos, de acuerdo con los parámetros de diseño del trabajo de manera segura y consistente de acuerdo con el plan de trabajo. Coordina la limpieza, reparación y preparación del equipo para el próximo trabajo. Utiliza procesos de competencia para mejorar el desarrollo de habilidades propias y el desempeño laboral. Las tareas del trabajo, correctamente realizadas, impactan indirectamente en la contención de costos, la eficiencia y la rentabilidad de las operaciones. Debe poseer habilidades excepcionales dentro de la línea de servicio y tener una comprensión general de otras funciones de servicio. Debe tener conocimiento de HMS, estándares HSE, métodos de trabajo y directrices. Promueve y contribuye a la conciencia de seguridad y conciencia ambiental. Promueve y participa activamente en los procesos de calidad y mejora continua.

Qualifications

Tecnico o Tecnico Superior Universitario en areas afines a la industria petrolera.
Experiencia de 5 años comprobables en estimulaciones acidas y no acidas en operaciones costa fuera (barcos estimuladores).
Operacion y mantenimiento de equipos como bombas de alta presion, equipo de mezclado, bombeo de nitrogeno.
Es un plus contar con experiencia en operar equipos de arena apuntalada.
Es un plus contar con experiencia en IOC's.
Disponibilidad de movilidad y/o radicar en la zona de Cunduacan, Tab.

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200719
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operador II, Estimulaciones - Offshore (Cunduacan, TAB, MX, 86693)

Job Duties

Qualifications

Requisitos:

Tecnico o Tecnico Superior Universitario en areas afines a la industria petrolera.
Experiencia de 3 años comprobables en estimulaciones acidas y no acidas en operaciones costa fuera (barcos estimuladores).
Operacion y mantenimiento de equipos como bombas de alta presion, equipo de mezclado, bombeo de nitrogeno.
Es un plus contar con experiencia en operar equipos de arena apuntalada.
Es un plus contar con experiencia en IOC's.
Disponibilidad de movilidad y/o radicar en la zona de Cunduacan, Tab.

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200759
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sustainability Reporting Principal Accountant (TX, US, 77032)

Sustainability Reporting Principal Accountant

The role of Sustainability Reporting Principal Accountant will support the company’s Sustainability Reporting team by ensuring that the company is positioned to comply with sustainability reporting regulatory requirements (EU CSRD, ISSB, SEC, etc.) and voluntary sustainability reporting. This position will support the company’s efforts to establish and maintain a strong control environment for sustainability reporting.

Job Duties

Interpret and apply company policy and controls as it relates to sustainability reporting.
Demonstrate knowledge of general accounting, internal controls, financial reporting, and financial applications.
Maintain a working knowledge of and research sustainability reporting requirements and peer reporting.
Stay current with emerging sustainability reporting regulations and assist with preparing stakeholders for new data requirements, controls, and reporting.
Support Halliburton in driving the education, communication, and implementation of the sustainability reporting requirements across the company.
Participate in multi-functional teams and work with subject matter experts across company to timely complete sustainability reporting requirements.
Coordinate data metric collection process including preparing and reviewing data metric workpapers to ensure completeness and accuracy for reporting.
Responsible for writing/reviewing process documentation, memorandums, and qualitative disclosures for reporting.
Perform complex reporting activities by running reports, analyzing outputs and organizing data for presentation purposes.
Identify gaps in processes and controls and suggest improvements when applicable.
Lead and support internal and external assurance.
Maintain timeline adherence and possess clear communication skills.

Job Requirements

Minimum of five (5) years of experience in accounting, audit, financial reporting, or related roles.
Requires completion of an undergraduate degree in accounting, business, finance, or related field.
Knowledge of US GAAP or country-specific accounting principles.

Required Qualities

Excellent technical, interpersonal, communication, and analytical skills.
Attention to detail.
Ability to thrive in a changing environment.
Prior internal or external audit experience, controls, and/or experience leading assurance engagements.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200855
Experience Level: Experienced Hire
Job Family: Support Services
PSL: Finance
Full Time / Part Time: Full Time

Service Operator II - Cementing (Duncan, OK, US, 73536)

Job Duties

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Performs pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system
Completes documents, reports, and forms related to the cementing service performed
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: Cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manifolding equipment, and cementing plug releasing tools
Assists in communicating the pre-job and on-the-job progress to customer
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

Requires completion of a high school diploma or equivalent
1 year of experience as Service Operator I - Cementing or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
A passing score on job-related tests or meeting task guidelines is required
Capable of being deployed to any rig in the work area

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

215 East Bois D'Arc, Duncan, Oklahoma, 73536, United States

Job Details

Requisition Number: 198166
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer, Associate (Singapore, 05, SG, 637131)

Job Duties

Job Description:

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development.
Assists in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews.
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information.
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.

Requirement :

Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200795
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

OT Security Architect (Domain Architect) (Houston, TX, US, 77032)

Job Duties and Qualifications

The OT Security Architect at Halliburton, you will play a pivotal role in shaping the architecture of our operational technology systems. This position sits at the intersection of technology, security, and innovation, making it a critical role in safeguarding our operations.

Roles & Responsibilities

Architectural Leadership: Lead the design and development of secure and resilient OT solutions, ensuring alignment with business objectives and industry best practices. Lead the design and execution of secure and resilient OT solutions (e.g. network segmentation, zero trust, vulnerability management, endpoint protection, remote access, IAM, IDS) ensuring alignment with business objectives and industry best practices like NIST and ICE 62443
Technical Expertise: Serve as a subject matter expert in OT security, providing guidance and mentorship to the OT security architect team.
Solution Design: Collaborate with cross-functional teams to design and implement robust OT security solutions, considering the evolving threat landscape and emerging technologies.
Risk Assessment: Conduct risk assessments and vulnerability analyses of OT systems, recommending mitigation strategies and proactive security measures.
Technical Documentation: Create and maintain detailed architectural documentation, ensuring clarity and compliance with company standards.
Collaboration: Work closely with stakeholders, including IT, engineering, and business units, to integrate security requirements into the OT ecosystem.
Innovation: Stay abreast of industry trends and emerging technologies in OT security to drive innovation and continuous improvement.
Incident Response: Collaborate with the incident response team to develop and test incident response plans for OT systems, as well as assist with remediating gaps identified in our OT architecture through real incidents, audits, assessments, or exercises.
Work cross functionally with other business departments and architecture teams to align activities and deliverables.

Qualifications

Bachelor’s/Master's Degree in a relevant field (e.g., Cybersecurity, Product Manufacturing, Computer Science, etc.); or a comparable level of expertise gained through on the job experience.
Relevant industry certifications such as CISSP, GICSP, GRID, or similar
Extensive experience in architecting and securing complex OT environments.
Familiarity with industry-specific standards and regulations (e.g., NIST, IEC 62443).
Previous experience in the oil and gas or manufacturing sector.
Experience with advanced security technologies such as anomaly detection and threat intelligence.
Strong problem-solving abilities and a track record of delivering innovative solutions.
Proven experience as an OT solutions architect, or comparable position, with a focus on security
Strong knowledge of industrial control systems (ICS), SCADA, and Operational Technology environments
Expertise in cybersecurity principles and practices related to OT environments.
Exceptional leadership, communication, and interpersonal skills.
Ability to collaborate effectively across teams and influence decision-makers.
Must be willing to travel based on project requirements.

Joining the Halliburton OT Security Team as an OT Security Architect provides a unique opportunity to contribute to the security and resilience of critical infrastructure in the energy sector while leading a team of talented professionals. If you are passionate about OT security, possess strong architectural expertise, and want to make a significant impact, we encourage you to apply and be part of our mission. This position will report directly to the Director of OT Security.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 195166
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Information Technology
Full Time / Part Time: Full Time

Additional Locations for this position:

R&M Electrical Tech I (Huizhou, GD, CN, 516000)

Job Duties

Qualifications

Location

CNOOC supply base, Huizhou, Guangdong, 516000, China

Job Details

Requisition Number: 199038
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer (Senior - Principal) Artificial Lift (Tulsa, OK, US, 74104)

Responsibilities & Qualifications

Responsibilities:
• Acts as a project lead by establishing development plans and preparing for design reviews.
• Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
• Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results.
• Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques.
• Contributes to Halliburton's Intellectual Property portfolio by delivering innovative and commercially successful solutions.
• Creates an impactful relationship with Halliburton's technical community, customers, and vendors by proactively collaborating with key stakeholders.
• Participates in professional societies in area of specialization.

Qualifications:
• Mid- level CFD analyst
• Fundamental understanding and extensive knowledge of Fluid Mechanics and Computational Fluid Dynamics
• Demonstrated critical thinking and problem-solving capability
• Self-motivated, team player
• Experience with turbulent flow and multiphase flow analysis, turbomachinery/pumps analysis
• Extensive experience with ANSYS CFX/FLUENT highly desire
• Ability to communicate clearly and confidently with internal and external customers
• Advanced degree required, Ph.D. in relevant disciplines preferred.

Candidates with qualifications exceeding the minimum job requirements will be considered for higher-level positions based on their experience, additional job requirements, and current business needs. Depending on their education, experience, and skill level, candidates may be eligible for a range of job opportunities, including positions ranging from Senior R&D Mechanical Engineer to Principal R&D Mechanical Engineer.

*ON-SITE*

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

835 W 41st St South, Tulsa, Oklahoma, 74104, United States

Job Details

Requisition Number: 199991
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Hunting Guide/ Ranch Hand (Encino, TX, US, 78353)

Job Duties

Seeking hunting guide Position includes staff lodging, private bath, TV, meals, and numerous benefits. The lodge is located approximately 10 miles south of Falfurrias, Texas

Role requires a knowledge of hunting, firearms, firearms safety, and interpersonal communication skills that will enable the individual to effectively guide hunting trips
Knowledge of deer, nilgai, javelina, hog, quail, and dove is required
Position also requires a working knowledge of hunting firearms and ammunition, a Hunter Education Certificate, a valid driver's license, a basic knowledge of auto mechanics, and the ability to lift, unassisted, 100 lbs
A knowledge of game laws, upland game species, their habitats, and the ability to field dress of game animals is required
In addition, some knowledge of carpentry, plumbing, and or electrical repair is a plus

Employees are encouraged to live on the premises during the hunting season, which is located in a remote region of South Texas. Prospective applicants should keep in mind that the remoteness of the Lodge, along with a prolonged hunting season limits the opportunity to visit with family and friends

Requirements:

Skills are typically acquired through 10 plus years' experience in hunting, fishing, and camping in the outdoor recreation and guide industry
Non-Commercial Driver's License required

Location

Hwy 281 South, Encino, Texas, 78353, United States

Job Details

Requisition Number: 198933
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Real Estate Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Kitchen/ Hospitality (Encino, TX, US, 78353)

Job Duties

We’re looking for a highly motivated and dependable individual to join our team for the upcoming 2025-2026 hunting season. The ideal candidate is self-driven, adaptable, and works well in a team setting. Experience in hospitality, cooking, or a similar field is a strong plus.

Responsibilities:

Prepare ingredients for cooking (e.g., chopping vegetables, cutting meat, etc.)
Maintain a clean, sanitized, and organized kitchen environment
Assist with a variety of cleaning duties including sweeping, mopping, dusting, and polishing
Ensure all rooms and common areas are cleaned and maintained according to standards
Monitor and restock consumables as needed
Notify management of any damages, shortages, or disturbances
Adhere to health, safety, and sanitation guidelines at all times
Proven experience in housekeeping, cleaning, or kitchen support
Experience using cutting tools, cookware, and bakeware
Familiarity with various cooking methods (grilling, baking, boiling, etc.)
Strong communication and teamwork skills
Ability to prioritize tasks and manage time effectively

Location

Hwy 281 South, Encino, Texas, 78353, United States

Job Details

Requisition Number: 198915
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Real Estate Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PE01-ESG-Tech Advisor-PE (Ciudad del Carmen, CAM, MX, 24140)

Job Duties

Under broad direction, responsible for planning, directing, and coordinating technical efforts directly with the customer. Functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far reaching impact on extensive engineering and related activities of the company. Uses subject matter expertise to resolve problems characterized by their lack of scientific precedence or previous research or analysis. Understands the operations sequence and how each discipline interacts with each other. Ensures operations are cost effective and consistent with overall strategy, aligned with Halliburton best practices and the Code of Business Conduct. Negotiates critical and controversial issues with engineers and/or officers of other organizations and companies. Performs advisory and consulting work for the organization as a recognized authority for broad program areas or in an intensely specialized area of considerable novelty and importance. Requirements include an undergraduate degree in Engineering, Science, Technology, or Mathematics and a minimum of 8 years of oil field experience (10 years preferred). Incumbents at this level will usually hold a certification as a Licensed/Chartered Professional Engineer. Must possess ability to oversee multiple projects and have excellent communication skills.

Qualifications

Location

Calle 6 Sur num Ext 2 Int 2A, Ciudad del Carmen, Campeche, 24140, Mexico

Job Details

Requisition Number: 199969
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

SPE01-ESG-R&M Electrical Tech I (Huizhou, GD, CN, 516000)

Job Duties

Qualifications

Location

CNOOC supply base, Huizhou, Guangdong, 516000, China

Job Details

Requisition Number: 198367
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Benefits Operations Analyst - Global Programs (Houston, TX, US, 77032)

Job Duties

Project management of international retirement governance projects, including third party financial and compliance audits, actuarial valuations, proof of life audits, missing terminated participants and ad hoc projects
Review, develop and support the maintenance of relevant internal and external benefits process documentation
Conduct audits of payroll and IT processes to troubleshoot eligibility data discrepancies and ensure third party data is accurate and complete.
Collaborate with other departments on escalated participant issues – legal, Finance, local HR, etc.
Assist with vendor oversight – TPA's, actuaries, advisors, consultants
Act as escalation point for ad hoc plan participant inquiries
Assist in the implementations of new vendors, regulatory changes and/or plan design changes
Support RFP activity as appropriate
Escalation point for domestic and international benefits platform, in partnership with local teams, Global Benefits, third party vendors and IT
Ad hoc benefits data audits – contracts vs invoices, performance metrics vs contracts, data discrepancies, etc.
Data analytics – reviewing proposed vs actual ROI and utilization of programs offered; review claims activity and identify key indicators and viable solutions
Retirement plan (401k) data processing / discrepancies – payroll adjustments, weekly funding, escalated issues.
Support Finance with required data for government filings (i.e. Form 5500)
Complete nondiscrimination testing for retirement plans
Act as project manager to ensure completion and distribution of mandated notices – SAR’s, annual 401k notices, Notices of Creditable Coverage, etc.
Review, develop and support the maintenance of relevant internal and external benefits process documentation
Other ad hoc requests as needed

Qualifications

5+ years of benefits consulting experience, preferably both retirement and healthcare
at least one actuarial exam completed
3+ years of experience with data analytics, focusing on healthcare data analysis/mining
3+ years project management experience
Must have very good analytical, technological and communications skills
Familiarity with SF, SAP strongly preferred
Ability to effectively leverage third-party applications
Must be a self-starter and intellectually curious
Must be able to thrive in a dynamic work environment
Must be willing to travel internationally 25%-50% of the time

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200046
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Human Resources
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

L043-ESG-Technical Sales Advisor, Prin (Bogota, CUN, CO)

Job Duties

Gain and utilize expertise in specific aspects of a PSLs&apos technology and services portfolio to educate Customers, Operations and BD on features, advantages and benefits of the PSL solution offerings. Under broad direction, the Technical Sales Advisor job family is accountable for Delivery Execution. This entails pursuing excellence in all day-to-day activities, identifying technical needs of customers through product knowledge and geographic understanding of challenges, aiding the BD organization in pursuit of work through customer interaction and internal/external workshops, providing technical recommendation to BD for proposal preparation regarding solution upsell, aiding operations and BD in the diagnosis and communication of solutions delivery issues, all utilizing a detailed knowledge base of specific subPSL products, services and solutions. Technical Sales Advisors help establish the strategic direction in the work area through clear understanding of the local customer&aposs business drivers and technical challenges and are responsible for identifying and executing up-sell (POP Plan) strategies within a geography of responsibility. Maintains an overview of the external market and Halliburton&aposs marketing strategies by collaborating with the PSL, Region/Country Business Development, Account and Tech Teams to identify opportunities to grow profitable revenue and maintain awareness of the technology available from the PSL. Provides input to PSL technology project priorities through the understanding of the market, customers needs and technology GAPs within the geographic customer base. Executes tactical action plans as set by Country management team. Must possess thorough understanding of the supported subPSL&aposs technology and broad understanding of the associated development tools. Understands and promotes the PSL&aposs quality directives. Assures that all operations are performed in a consistent manner in compliance with all HSE and OE policies and best practices. Utilizes project management skills and tracking tools in the organization and execution of project assignments. Provides guidance to less experienced staff. Job role has budgetary type of accountabilities or directly impacts a revenue center&aposs viability or its quality of service via personal contributions. Completion of an undergraduate degree in Engineering or related discipline required. Minimum of 10 years of experience in energy services industry with preferably a minimum of 5 years as a field professional.

Qualifications

Location

Calle 113 #7-80, 3.Floor Torre, Bogota, , , Colombia

Job Details

Requisition Number: 198902
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Director, IAM Commercialization (Houston, TX, US, 77032)

Job Duties and Qualifications:

• With general autonomy, leads and supervises the Integrated Asset Management (IAM) Commercialization staff in the evaluation and negotiation of potential oil and gas acquisitions and divestitures, analysis and approval of major capital investments, and assessment of ongoing oil and gas asset operations.

• The role is responsible for:

* Evaluation and assessment of oil and gas investment opportunities

* Sourcing and engaging with Private Equity firms and Drilling JV’s; forming LLC’s; and understanding Legal, Finance and Accounting implications
* Evaluation and delivery of complex external finance mechanisms and detailed execution of specific project financing
* Leadership of decision and risk analysis including risk management of commodity prices through hedging recommendations and analysis
* Taking the lead role in negotiation of potential oil and gas acquisitions, divestitures and major investments and also serving as key coordinator with the Law Department in preparing documents related to such activities

• Requirements for the role include:
* A full and complete understanding of oil and gas economics with
* The capability to review and potentially propose large, complex models
* Familiarity with the major commercial structures for oil and gas fields around the world including Production Sharing Contracts (PSCs), Technical Services Contracts (TSCs), Concessions and U.S. Mineral Rights

• The role shares responsibility, as member of the Integrated Asset Management leadership team, for establishing goals, contributing to long term strategy, and guiding successful performance of the group.
• Job role has budgetary type accountability or directly impacts a revenue center’s viability or its quality of service via person contributions and contributes directly to value creation.

Qualifications:
• Requires an undergraduate business degree and a minimum of 20 years of experience, including a minimum of 10 years in financial analysis and general finance.
• Experience in the Exploration and Production sector is a requirement
• An MBA is preferred.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200047
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Solutions Engineer III (Staouéli Algiers, 30, DZ, 16000)

Job Duties

Under broad direction, is responsible for driving sales by understanding and addressing customer challenges with Landmark solutions. This role includes but is not limited to various disciplines in engineering and science. Identifies opportunities, maps solutions to customer needs, conducting product/solution presentations, demos and leading Proof-of-Value projects to demonstrate solution value and grow sales. Collaborates with sales representatives and other internal & external stakeholders to create technical proposals and drive deal closures. Develops and maintains key customer relationships, and actively contributes to day-to-day execution of Landmark’s strategy in the assigned geography and domain. Demonstrates thought leadership through industry events, Tech Days, technical publications, workshops and webinars. Provides market and customer feedback to aid product/solution innovation, and shares knowledge and experience with the broader Landmark organization. Skills are typically acquired through the completion of an undergraduate degree in an engineering, computer science, or similar discipline (discipline may vary by domain) and a minimum 8 years of experience in the energy software industry or equivalent.

Qualifications

Location

Sheraton Hotel Club Des Pins, Staouéli Algiers, , 16000, Algeria

Job Details

Requisition Number: 198673
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PC01-ESG-Operator Asst I-Coiled Tubing (Neiva, HUI, CO)

Job Duties

Under strict supervision, learns basic safety and repair procedures on PSL equipment using an internal competency process defined for this job role. Learns basic operations to include but not limited to: (1) performing pre/post job Coil Tubing equipment inspections, (2) performing and completing preventative maintenance procedures, (3) maintaining support equipment (i.e., pumps, flowback lines etc.). Completes requisite training (essential math, essential red book, safety training, etc.) following internal career development processes. Assists in the cleanup, repair, and preparation for a job. May be asked to assist during the rigging up and down of service line equipment at the wellsite. Skills are acquired by completing the career development requirements in iLearn&aposs competency management system for Operator Assistant I. Must have successfully passed company tests and met competency Task Lists requirements. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. The ability to perform basic mathematical calculations is required. Reading comprehension and writing skills are required. Basic computer skills are preferred. Licensure to drive commercial vehicles is required for land operations. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. This is the entry level position into the Service Operator job family.

Qualifications

Location

Kilometro 3 via Bogota, Neiva, , , Colombia

Job Details

Requisition Number: 198943
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Systems Engineer - 198953 (Houston, TX, US, 77032)

EMPLOYER: Halliburton Energy Services, Inc.

Job Title: Tech Prof- Systems Eng, Sr

Job Location: 3000 N. Sam Houston Parkway East, Houston, TX 77032

Duties:

Responsibilities include: Performs maintenance, preventive and repairs, on Acoustic downhole tools, inter tool cables and surface control modules. Performs maintenance on wireline resistivity, nuclear, acoustical, imaging, magnetic resonance, formation tester downhole tools, both electronics and mechanics sections. Conducts Tap Root analysis of equipment and downhole tools failures and setting an action plan to avoid recurrence. Manages acoustic research and development projects (finances, scheduling, technical, risk mitigation) working with Sonic and Ultrasonic Sensors technologies. Creates technical engineering reports on performance of acoustic projects for the oil and gas industry. Utilizes commercial & internally developed software packages to collect and analyze data from newly developed acoustic sensors and transmitters. Operate computer-assisted engineering or design software or equipment to perform electronics engineering tasks for the oil and gas industry. Recommend repair or design modifications of electronics components or systems, based on factors such as environment, service, cost, or system capabilities. Plan or develop engineering applications or modifications for electronic properties used in components, products, or systems to improve technical performance. Prepare engineering sketches or specifications for construction, relocation, or installation of equipment, facilities, products, or systems. Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving unprecedented engineering problems during the development and application of new and improved products and processes. Under broad scientist direction, can perform collection, analysis and correlation of data utilizing existing commercial software and may develop new algorithms to help develop unique customer solutions using sonic and or ultrasonic architectures. Proficient as a logging field engineer with specific expertise in Seismic and Acoustic data acquisition. Proficient in troubleshooting wireline logging tools and resolving issues. Prepare detailed project plans to manage medium complexity wireline projects. Resolve critical project related issues and communicates effectively with key representatives and stakeholders.

Requirements: Employer will accept a Bachelor's degree in Electronics Engineering, Automation Engineering or related field and 4 years of experience in the job offered or in a Tech Prof- Systems Eng, Sr-related occupation.

Position requires experience in the following:

Experience preparing resources, planning and performing Vertical Seismic Profile jobs on site, using Advanced Seismic Receiver tools and NOMAD 65 as a source of vibration.
Experience performing maintenance, preventive and repairs, on Seismic downhole tools, inter tool cables and surface control modules.
Experience in preventive and corrective maintenance of wireline resistivity, nuclear, acoustical, imaging, magnetic resonance, formation tester downhole tools, both electronics and mechanics sections.
Experience conducting Troubleshooting and Tap Root analysis of equipment and downhole tools failures and setting an action plan to avoid recurrence.
Experience performing preventive and corrective maintenance of surface equipment for logging and perforating operations with multiconductor and mono cable wireline.
Experience as Radiation Safety Officer, including physical radioactive source inventory, transport documentation, licensing, dosimetry and training.
Experience managing multi-disciplinary maintenance teams to increase efficiency, achieve timeline goals and maintain budgetary targets.
Experience in data acquisition and processing using MatLab, Warrior and Insite for Wireline.
Experience utilizing complex test equipment to troubleshoot and heat test acoustic sensors.

To apply, visit jobs.halliburton.com and enter #198953 in “search by keyword” field. If offered employment, must have legal right to work in U.S. EOE, including disability/veterans.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 198953
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Application Eval Spec-DBS, Assc (Baku, BA, AZ, AZ1065)

Job Duties

Under direct supervision, assists in post-well evaluation of product performance and development of product performance optimization solutions.
Provides technical and operational assistance to internal customers.
Assists with developing required product designs for an assigned area.
Participates in developmental programs to accelerate learning.
Learns product design theory and how to use technical software tools to perform their work.

Qualifications

Requires an undergraduate degree in Science, Technology, Engineering and Math, or Business related discipline.
Previous work experience not required.

Location

5 Tbilisi Ave, Block 1003, Baku, Baku, AZ1065, Azerbaijan

Job Details

Requisition Number: 199348
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Drill Bits and Service
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cement Operator Assistant II (198163) (Montgomery, PA, US, 17752)

Job Duties

$1000 Sign On Bonus Available

Depending on the job location, lodging and rotating schedule may be provided.

Responsibilities:

Under supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, and rigging-up appropriate data monitoring equipment
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports
Verifies correct line up of valves on bulk systems and surface manifold equipment
Understands hazardous materials, job, wash up and discharge procedures
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

Work Experience:

Must have 3-6 months of experience as Operator Assistant I – Cementing or 1 year of related work experience in oilfield services

Must have Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Completion of Operator Assistant I – Cementing competencies, or similar level of competence from previous industry experience
Able to lift 60 lbs.
Able to communicate effectively with others
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

World class benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 198163
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

Field Service Spec,. (Coca, D, EC)

Job Duties

Under direct supervision, provides on-site supervision of Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) processes, including tool preparations, data acquisition, and delivery of the services to the customer. Ensures that data presented to the customer is accurate, timely, and meets the highest possible service quality standard. Assists in providing the customer with expected and needed data and in identifying possible problems to the customer. Assists in providing technical consultation to the customer. Properly tests all tools and equipment before, during, and after each job. Understands principles of Bottom Hole Assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping, and handling. Assists in accurately completing all required forms, databases, and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI). Aware of customer requirements regarding directional survey procedures. Assists in interfacing with the Remote Drilling Coordinator and/or Directional Driller (RDC-DD) to ensure BHA compatibility, planned operating parameters are within specification, and correct tool face references are applied. Participates in performance improvement initiatives.

Qualifications

An undergraduate degree in a STEM discipline is required.
Requires completion of the basic M/LWD and DD training programs, and a minimum of 3 years of experience in the field.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199870
Experience Level: Experienced Hire
Job Family: Operations
PSL: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Operator Assistant II - Cementing (Bossier City, LA, US, 71111)

Job Duties

Under supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, and rigging-up appropriate data monitoring equipment
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports
Verifies correct line up of valves on bulk systems and surface manifold equipment
Understands hazardous materials, job, wash up and discharge procedures
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes

Qualifications

High school diploma or equivalent education required
Must have 3-6 months of experience as Operator Assistant I – Cementing or 1 year of related work experience in oilfield services
Must have Class A CDL
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Able to lift 60 lbs.
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions and be able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long workdays, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions Able to communicate effectively with others and maintain effective working relationship with other employee

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4720 Industrial Dr, Bossier City, Louisiana, 71111, United States

Job Details

Requisition Number: 198169
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Professional-Optimization, (Pune, MH, IN, 411001)

Job Duties and Qualifications

Under direct supervision, assists with delivery of Optimization services to make safe and cost-effective recommendations to the customer during the course of the well. Observes and assists with accurate collection and documentation of drilling optimization data. Analyzes and interprets optimization data to assist in the planning and resolution of complicated drilling related engineering problems within the disciplines of drilling optimization. Assists in the creation of accurate and professional reports provided to the customer including daily report, end of section report, end of well report, and specific incident reports. Provides high quality service to the customer in order to ensure continued business, identifying opportunities for use of additional services and new technologies where possible. Actively participates in quality improvement processes. Learns broad range of optimization skills through assisting in projects of varying complexity. Requires an undergraduate degree Science, Technology, Engineering or Math and a minimum of 1.5 years relevant industry experience.

Location

Sai Radhe Building 100, 101, Pune, Monaghan, 411001, India

Job Details

Requisition Number: 197387
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator I - Cementing (Victoria, TX, US, 77905-5555)

Job Duties

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies
Learns to perform pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined

Qualifications

Requires completion of a high school diploma or equivalent
6 months of experience as an Operator Assistant II-Cementing; Completion of Operator Assistant II – Cementing competencies, or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes
A passing score on job-related tests or meeting task guidelines is required

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

101 Holt Rd, Victoria, Texas, 77905-5555, United States

Job Details

Requisition Number: 198192
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Chemical Account Manager (II - Senior) - Multi Chem (Williston, ND, US, 58801)

Job Description

Job Duties:

Under broad supervision, this position is responsible for creating, building and sustaining customer relationships, managing chemical accounts for customers, troubleshooting and scheduling.
Responsible for oversight of day-to-day operations necessary to sustain our client accounts and for acquiring new business opportunities with new clients.
Must demonstrate the ability to stabilize business in large, strategic accounts.
Responsible for managing larger accounts with revenues from $2.5MM-$5MM.
This role will directly supervise personnel in order to maintain accounts.
Supervisory responsibilities consist of interviewing/selecting employees, providing performance feedback to employees through regular check in, directing/monitoring their work, taking corrective action, and ensuring proper adherence to company policies and procedures.
Will pursue organic growth opportunities with existing customers and new opportunities with new customers.
Technical requirements of this position include: knowledge of Multi-Chem's product lines and their application, the capability to test, select and recommend products following established work methods.
Provide technical support and escalate complaints as required.
May be required to act as the expert on the job site where they will supervise the collection of samples and will analyze associated data as necessary.
Delegate tasks such as chemical product line selection testing to Service Techs where appropriate.
Provide sound technical advice and recommendations to support customer operational requirements.
Knowledge of chemical pump design and specifications.
Create, build and sustain custom chemical programs and optimize those programs as opportunities arise.
Knowledge of Microsoft product platforms.
Provide clear, concise and routine reports and recommendations internally to management and externally to clients.
Produce and present technical presentations.
Utilize software to maintain customer financial & technical portfolios.
Perform system analysis.
Interpret data and develop recommendations to ensure operations are performing at an optimal level.
Demonstrate strong leadership by coaching and training others and leading portions of District Meetings.

Qualifications

Requires completion of high school diploma or equivalent.
Minimum of 4 years of experience in the Production Chemical business which includes experience in the oil and gas industry.
Must have a current and valid driver's license and a clean motor vehicle record.
Must have experience with Microsoft Office Suite (Outlook, Teams, Excel etc.).

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

E 1/2 Lot 3, Block 4, Williston, North Dakota, 58801, United States

Job Details

Requisition Number: 198412
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Engineering Manager - Senior Engineering Manager (Manufacturing) (Pasadena, TX, US, 77507)

Bayport Plant Engineering Manager oversee the design, implementation, and optimization of manufacturing and operational processes within chemical manufacturing site. This role lead teams of engineers to ensure efficiency, cost-effectiveness, and compliance with process safety and quality standards. The role involves strategic planning, cross-departmental collaboration, and leadership of small to medium scale process initiatives.

Job Duties

Lead the development and optimization of engineering processes, ensuring they meet industry standards and best practices.
Drive continuous improvement initiatives utilizing methodologies
Oversee the development and implementation of key performance indicators (KPIs) to measure and report on process effectiveness and efficiency.
Collaborate with product development, manufacturing, and quality assurance teams to align engineering processes with operational goals.
Mentor and lead a team of process engineers, fostering a culture of innovation and accountability.
Conduct regular audits and assessments of engineering processes to identify areas for improvement and implement corrective actions.
Stay abreast of industry trends and emerging technologies to ensure our processes remain up to date.

Qualifications

10+ years of experience in process engineering, with a proven track record of leading engineering teams and driving process improvements.
Strong analytical skills with experience in data-driven decision-making.
Proven ability to manage multiple projects simultaneously in a fast-paced environment.
Degree in Chemical Engineering, or a related field.

World Class Benefits

State of the art facility featuring a climate controlled work area, private gym and gated parking lot with onsite security
Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Technical Professional Manager - Manufacturing or Senior Technical Professional Manager.

Location

11200 Bay Area Boulevard, Pasadena, Texas, 77507, United States

Job Details

Requisition Number: 198281
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cement Service Operator II (198168) (Montgomery, PA, US, 17752)

Job Duties

$1500 Sign On Bonus Available

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Performs pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job.
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system.
Completes documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Assists in communicating the pre-job and on-the-job progress to customer.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.
Capable of being deployed to any rig in the work area

Qualifications

Skills are typically acquired through successful completion of high school or similar education and
1 year of experience as Service Operator-Cementing I.
Class A CDL Required
Given the nature of oil field service work, the ability to communicate effectively with others is necessary

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 198168
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

Service Operator I - Cementing (Bossier City, LA, US, 71111)

Job Duties

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies
Learns to perform pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations
Consequences of error are easily measured and can be confined

Qualifications

Requires completion of a high school diploma or equivalent
6 months of experience as an Operator Assistant II-Cementing; Completion of Operator Assistant II – Cementing competencies, or similar level of competence from previous industry experience
Class A Commercial Driver's License (CDL) Required; Manual transmission is preferred
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines
Promotes and takes an active part in quality improvement processes
A passing score on job-related tests or meeting task guidelines is required

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4720 Industrial Dr, Bossier City, Louisiana, 71111, United States

Job Details

Requisition Number: 198157
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cement Service Operator I (198170) (Montgomery, PA, US, 17752)

Job Duties

$1500 Sign On Bonus Available

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies.
Learns to perform pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports.
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers.
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.

Qualifications

Skills are typically acquired through successful completion of high school or similar education and at least 6 months of experience as an Operator Asst-Cementing, II.
Class A CDL is required.
May require I-Learn courses: General Hydraulics for Downhole Tools and Essential Preventative Maintenance.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
A passing score on job-related tests or meeting task guidelines is required.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 198170
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

Reforma-Surface Well Testing Field Engineer (Reforma, TAB, MX, 29500)

Job Duties

Requirements:

Bachelors Degree in Petroleum Engineering, Mechatronics or related to the oil & gas industry.
Verifiable experiencie, with work records, of at least 4 years as a Well Testing field specialist.
Knowledge of fluid mechanics, thermodynamucs and hydrocarbon measureament standards.
Experience in preparation, calibration and maintenance of SWT equipment, preparation of tecchnical proposals and simulations for operationes.
Advanced English profieciency.

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 198916
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A183-ESG-Materials Control Specialist (Barrancabermeja, SAN, CO)

Job Duties

Under general supervision, responsible for leading local inventory planning meetings, setting and maintenance of material requirements planning (MRP) data, running analytics to optimize inventory levels, and identifying and redeploying obsolete inventory. Role requires an understanding of inventory planning. Responsible for the basic inventory management function for the area supported to include: sales order delivery process and reconciliation, reporting to PSL leadership key metrics, goods issue and receiving process and developing solutions to address gaps. Will interface with procurement, logistics and manufacturing customer service representatives to prioritize orders, monitor lead times, and provide forecast information . The position requires interfaces with the product service lines (PSL) and other support groups. This position will also promote Lean and continuous improvement initiatives and comply with the company's safety programs. Will have direct impact and responsibility to meet financial goals and objectives for the business. Strong computer skills and analytical abilities to resolve problems required.

Qualifications

Profesional en Administración de Empresas, ingeniería industrial, Logística y/o relacionado a la cadena de suministros.

Experiencia de 2 a 4 años en gestión de inventarios, sistemas de almacenamiento, control y disposición de materiales peligrosos preferiblemente en el sector Oil & Gas.

Experiencia en el manejo en SAP, manejo de montacargas y equipos, cumplimiento de indicadores.

Nivel de inglés Intermedio

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 198393
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sustainability Reporting Accountant (Principal - Supervisor) (Houston, TX, US, 77032)

Job Duties

The role of Sustainability Reporting Principal Accountant will support the company’s Sustainability Reporting group by ensuring that the company is well positioned to comply with sustainability related regulatory requirements (EU CSRD, ISSB, SEC, etc.). This position will support the company’s efforts to establish and maintain a strong control environment for sustainability reporting.

Interpret and apply company policy and controls as it relates to sustainability reporting.
Demonstrate knowledge of general accounting, internal controls, financial reporting, and financial applications.
Maintain a working knowledge of and research sustainability reporting requirements and peer reporting.
Stay current with emerging sustainability regulations and assist with preparing stakeholders for new data requirements, controls, and reporting.
Support Halliburton in driving the education, communication, and implementation of the sustainability reporting requirements across the company.
Participate in multi-functional teams and work with subject matter experts across company to collect data metrics and review methodologies that describe the data collection process.
Manage preparation of non-financial disclosures and various Key Performance Indicators (KPIs).
Review non-financial information and KPIs to ensure completeness and accuracy on ad-hoc/quarterly/annual basis.
Perform complex reporting activities by running reports, analyzing outputs and organizing data for presentation purposes.
Identify gaps in processes and controls and suggest improvements when applicable.
Responsible for internal and external assurance.
Maintain timeline adherence and possess clear communication skills.

Qualifications

Minimum of Five (5) years of experience in accounting, audit, financial reporting, or related roles.
Requires completion of an undergraduate degree in accounting, business, finance, or related field.
Knowledge of US GAAP or country-specific accounting principles.

Preferred Qualities

Excellent technical, quantitative, and analytical skills.
Attention to detail.
Ability to thrive in a changing environment.
Prior audit or experience working with auditors a plus.
Team player with excellent interpersonal and communication skills.
Open to learn about the oil and gas industry and the core businesses of Halliburton.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 196582
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Operator Assistant I-Sand Control (Perth, WA, AU, 6164)

Job Duties

Under strict supervision, assists during the rigging up and down of Sand Control service line equipment on work locations for the purpose of providing Sand Control pumping services.
Learns basic Sand Control operations to include but not limited to: (1) performing pre/post job equipment inspections, (2) performing and completing preventative maintenance procedures, (3) maintaining and operating sand control support equipment (i.e., pumps, blenders, treating lines, etc.) and (6) completing sand control prerequisite training (essential math, essential red book, safety training, etc.).
Assists in assembly and preparation of equipment for installation and service.
Assists in the running of a job and in the clean up, repair, and preparation for the next job.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.

Qualifications

Skills are typically acquired through completion of high school or similar education.
Must have successfully passed company tests or met task guideline requirements.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
Licensure to drive commercial vehicles may be required.
This is the entry level position into the Service Operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 200668
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Geoscientist (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under broad direction, an Geoscientist, Assoc II applies advanced knowledge gained via a STEM degree and internal training to perform detailed production, nuclear spectroscopy, acoustics and electro- magnetics analyses of highly-specialized sensor data obtained from hydrocarbon reservoirs.
The analyses are performed using highly specialized scientific methods such as interpreting algorithms and workflows that translate the measured data into hydrocarbon reservoir rock and fluid properties.
The Geoscientist, Assoc II compiles the resulting analyses and their findings in a report that is provided to oil and gas company customers.
They use discretion in selecting the parameters used in the analyses that they perform and to determine if there are quality issues with the sensor data.
Their customers are geo- scientists (petro-physicists, geologists, geophysicists) and engineers (reservoir engineers, completion engineers, production engineers) who use the analyses and findings provided to make decisions on if, and how the oil and gas companies develop their hydrocarbon reservoirs.
Geoscientist, Assoc II's provide analyses on data from multiple sensor types while they develop their analysis skills for integrated sensor interpretation.
They are routinely involved in customer engagements to review their analyses and findings, and have some involvement in business development activities.
Their communication skills must include effective verbal, written, and listening skills.
They plan and manage their own time to perform the accountabilities of their job duties.
Completion of an undergraduate degree in a STEM discipline is required to successfully perform the job functions outlined above.
A minimum of 1 + year of experience and possession of a graduate degree in a STEM discipline is preferred.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 199838
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Machine Operator (Singapore, 05, SG, 637131)

Job Duties

Working under close supervision, sets up, adjusts, and operates a variety of machine tools which may include numerical control/computerized numeric control lathes, mills, drills, computerized numerical control/numerical control and/or manual machines. May be required to read blueprints, perform varying levels of shop mathematics associated with machining operations, and perform inspection procedures to verify work. Skills typically acquired through 1-2 years related machining experience.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200877
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Well Engineer, Sr (Gurgaon, HR, IN, 122018)

Job Duties and Qualifications

Under general supervision, the Senior Well Engineering Leader is responsible for more technically complex well designs and process implementation for well proposals, the Well Basis of Design, and Well Operation Programs. May be responsible for supervising less senior Well Engineers . Assures technical integrity of Well Operations planning and execution. Responsible for continuous improvement through lessons learned, timely End-of-Well reports and ensures feedback is incorporated in future operations. Ensures creation and approval of Approval for Expenditure (AFE) and cost control of operations. Ensures risk assessments are conducted to assure a safe and environmentally acceptable operation and forecasts and plans medium and long term needs to meet operational requirements. Coordinates daily morning meetings, anticipates operational changes and needs, and revises plans accordingly. Evaluates results compared to goals and performance targets. Ensures engineering studies are performed to solve recurring problems. Prepares equipment lists and identifies long lead items. Requires an undergraduate degree in STEM, preference in Petroleum or Mechanical Engineering, and 8+ years of well services experience. Well Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.

Job Duties and Qualifications

Requirements:

• Bachelor’s degree in petroleum engineering or other petroleum industry related 4 yr degree.
• 8 - 10 years of relevant experience: Experience in a similar role is essential, demonstrating the ability to manage complex technical operations, including offshore experience preferably for 1-2 years.
• IWCF Well Control certification required.

Key Responsibilities:

• Preparation of engineering design and operational plans for drilling of wells in area of responsibility including well planning, casing design, material and equipment selection, log evaluation, quality assurance and post-job evaluation
• Responsible for Complex well designs and process implementation for well proposals, the Well Basis of Design, and Well Operation Programs.
• Assures technical integrity of Well Operations planning and execution.
• Plan and perform well engineering activities at office level and provide engineering support to field level operations
• Define rig selection criteria and requirements
• Well site engineering support
• Responsible for continuous improvement through lessons learned, timely End-of-Well reports and ensures feedback is incorporated in future operations.
• Ensures creation and approval of Approval for Expenditure (AFE) and cost control of operations.
• Ensures risk assessments are conducted to assure a safe and environmentally acceptable operation and forecasts and plans medium and long term needs to meet operational requirements.
• Coordinates daily morning meetings, anticipates operational changes and needs, and revises plans accordingly.
• Evaluates results compared to goals and performance targets. Ensures engineering studies are performed to solve recurring problems.
• Participate in tender bid preparation process as needed for drilling & well engineering input. This might include travel to other office locations
• Participate in and conduct customer presentations & meetings, as needed, including travel to other office locations.

Specific Skills and Knowledge:

• Required: Proficiency in Openwells, ensuring accurate data management and monitoring of well operations.
• Desired: Familiarity with tools such as Wellcat, Wellplan, Casing Seat, Compass, Casing Wear, Stresscheck, and @Risk to enhance well planning and operations analysis.

Location

Village Maidawas, Sector 65, Gurgaon, Haryana, 122018, India

Job Details

Requisition Number: 197577
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant Trainee - Frac Acid (Zanesville, OH, US, 43701)

Job Duties and Qualifications

This is an entry-level position subject to a 90-day training period where Halliburton will provide industry leading training in our field operations. Depending on the job location, lodging and rotating schedule may be provided.

Under supervision, you will learn basic safety, repair and operations procedures on equipment and tools for this job.
You will Learn and adhere to Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines.
Assists in the completion of pre and post job equipment inspections and associated paperwork and/or reports.
Assists in rigging-up and rigging-down of operation equipment which can include high-pressure iron and hose connections.
Assist in completing preventative maintenance procedures and maintaining support equipment.
Assists in the clean-up, repair, and preparation for a job.
Practices safe driving procedures when traveling to and from locations.
Completes training as required following the Company's learning development system and processes.

Requirements:

Must have High school diploma or equivalent education
Must be able to obtain a Class A CDL license with tanker endorsement or a class B license depending on product service line
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Able to lift up to 60lbs
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions

Able to perform basic mathematical calculations
Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effecting working relationship with other employees

Additional Information

Benefit enrollment begins within 30 days of hire date and coverage will become effective on the 90th day of employment.
Eligible to participate in the Halliburton Retirement and Savings (401K) Plan as of the first day of employment.
Sign-on bonus after the 90th day of employment
- Sign-on bonus is subject to certain conditions and approvals by area leadership.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200098
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Student of Administration or Human Resources (Santa Cruz, S, BO)

Job Duties

Performs assignments designed to develop professional or technical work knowledge and abilities requiring application of standard techniques, procedures, and criteria in carrying out a sequence of related tasks. Limited exercise of judgment is required on details of work and in making preliminary selections and adaptations of alternatives.

University student, studying last year of Administration or Human Resources
Intermediate level management of MS Excel.
Intermediate english level.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199614
Experience Level: Internship
Job Family: Support Services
PSL: Other
Full Time / Part Time: Full Time

A427-ESG-Intern (Santa Cruz, S, BO)

Job Duties

University student, studying last year of Engineering Career.
Intermediate level management of MS Excel.
Intermediate english level.

Qualifications

Location

Carretera Antigua a Cochabamba, Santa Cruz, Campobasso, , Bolivia (Plurinational State of)

Job Details

Requisition Number: 198719
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US Zanesville: Service Operator II - Frac/Acid-200093 (Zanesville, OH, US, 43701)

Job Duties and Qualifications

Under direct supervision, performs necessary calculations for fluids quality verification at the wellsite as needed.
Performs equipment rig up and rig down on a location and prepares equipment for performing a job.
Ensures customer satisfaction with work performed.
Responsible for pre-blending fluid systems operations and management of the chemical inventory at the wellsite.
Responsible for fluids quality during the delivery of services in accordance with the customer's job design and KPIs.
Performs data collection and data distribution on jobs as needed.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Utilizes competency processes to enhance employee skills development and job performance.
Must possess exceptional skills within the service line and have a general understanding of other service functions.
Must be knowledgeable of HMS and HSE standards.
Promotes and contributes safety awareness and environmental consciousness.
Promotes and takes an active part in quality and continuous improvement processes.
Consequences of error are easily measured and can be confined.

Qualifications:

Must have High school diploma or equivalent education
Skills are acquired through one year of experience and completion of required competencies at current and next level.
Must have Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200093
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus maybe available subject to certain conditions and approvals by area leadership.

Student of Business Administration or Industrial Engineering (Santa Cruz, S, BO)

Job Duties

Estudiantes universitarios en su último semestre de las carreras de: Ingeniería Industrial, Petróleo, Mecánica, Electromecánica, Química, Sistemas, Administración y/o afines.
Conocimiento en herramientas como Excel, Microsoft Office y base de datos.
Nivel de inglés Intermedio.

Qualifications

Location

Carretera Antigua a Cochabamba, Santa Cruz, Campobasso, , Bolivia (Plurinational State of)

Job Details

Requisition Number: 199324
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: BD-Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant - Netherlands (Rijswijk, NH, NL, 2288 EK)

Job Duties

JOB DESCRIPTION:

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned. Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

Verrijn Stuartlaan 1c, Rijswijk, , 2288 EK, Netherlands

Job Details

Requisition Number: 199824
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Category Specialist (Neuquen, Q, AR, Q8345)

Job Duties and Qualifications

Under broad direction, may support one or more related categories as directed by Portfolio and Category Leadership.
Implement strategic sourcing and category strategies in accordance with policies and procedures. Contribute to assessment of current market situations and identification of opportunities. Contribute to detailed planning and execution of improvement actions with users and suppliers.
Negotiates with suppliers and prepares contracts and agreements under the direction of Category Manager. Recommends value added projects/opportunities.
Coordinate training of category community and field personnel. Act as an interface between business and supplier for category, resolving category issues. May represent the Category Manager on teams and councils, as assigned. Participate in supply chain governance and performance management activities.

REQUIREMENTS:

Industrial, Mechanic, Petroleum, Chemistry engineering
Minimum of 5 years of experience in purchasing processes, supplier management, budget administration, competitive bidding in the Oil field tools and services and chemical sectors.
Advanced English Proficiency is mandatory
SAP ARIBA Management
Available to relocate to Neuquén, Argentina

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, Neuquen, Q8345, Argentina

Job Details

Requisition Number: 196719
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

BD09-ESG-Fld Svc Rep-Drilling Fluids II (Dubai, DU, AE)

Job Duties and Qualifications

Location

DBSC, 23rd Floor,SRT,Dubai WTC, Dubai, Dubai, , United Arab Emirates

Job Details

Requisition Number: 196724
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Field Professional -L&P Cased Hole -198539 (New Iberia, LA, US, 70560)

Job Duties

Under direct supervision, assists in the preparation and execution of Cased Hole logging services on location in accordance with HMS.
This is the entry level position for this discipline and will train directly under the supervision of an appropriate frontline leader or a competent Field Professional assigned by the frontline leader to gain knowledge of operations.
Assists in checking equipment prior to and after logging operations. Gains familiarity with Surface System and Cased Hole tools through field work under mentorship.
Promotes and ensures compliance with Health, Safety and Environment (HSE) and Service Quality (SQ) standards, practices and guidelines.

Qualifications

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Location

719 Hanger Dr, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 198539
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tax-Specialist (Mumbai, MH, IN, 400059)

Job Duties

Under general supervision, supports tax reporting with a core understanding of prevailing statutory authority and it's applicability to financial (general ledger) data. Responsible for activities supporting financial close process, account reconciliations and supporting financial pronouncement and tax technical research, as applicable. Reviews functions of more junior staff and prepares technical memoranda for Tax Managers in support of tax technical positions taken in financial statements and statutory tax filings. May assist with maintenance of internal controls and audit defense for tax positions taken in filings. In addition to their designated area of strength, they should be generally comfortable with fundamentals across the group in which they serve. Requires an undergraduate degree in Accounting or related field and 5 years related experience and/or equivalent combination of education and competency. Applicable professional designation preferred. Excellent personal communications skills and ability to work in team environment a must.

Overview:

We are seeking a highly skilled and motivated Tax professional to join our team. The ideal candidate should have a strong understanding of Indirect Tax law and processes and possess extensive knowledge of leading ERP, SAP. Work in conjunction with Finance & Accounts team to develop & implement various tax planning measures & abide by statutory compliances so as to support the organization to be tax effective & reduce tax liabilities to minimum with respect to Indirect Tax.

Roles and Responsibilities:

The role is responsible for filing of GST Compliances including GST audits, assessments and litigation thereon.

• Ensuring the documentations, registers, reporting, tax payments, returns and audit for locations having GST registration.
• Assist in handling audit, assessments and supporting litigation to ensure smooth audit and protecting the tax positions.
• Work closely with cross functional teams on GST assessment and implementation.
• Assist in compiling of the data for filing Tax Returns of various Indian States.
• Engage in Tax technology projects as required by Management.
• Passing journals relating to Tax, reconciliation between books and GST returns, Corporate reporting.
• Independently handling audits and coordinating with the tax authorities.
• Providing contract, tender reviews from tax perspective

Qualifications

Basic Qualifications: Preferred CA (Chartered accountant) / LLB

Total Years of Experience: 5years

Location: Mumbai

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400059, India

Job Details

Requisition Number: 199122
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US Houston: Chief Electrical Engineering Advisor (TX, US, 77032)

The Chief Engineer is recognized as a technical authority in a specific engineering discipline and acts with general autonomy to see business opportunities, recognize possible technical solutions, and work with a cross-functional staff to deliver innovative products and services. In this role, you will need to be creative, dynamic, passionate, and data-driven with the ability to effectively communicate and influence the internal teams and/or customers to deliver best-in-class solutions. This is a high visibility position where the incumbent is expected to frequently interact with Technology leadership, business leadership, and customers to formulate and plan technology delivery for electrical systems and applications.

General Duties & Responsibilities

Leverages a strong understanding of customer operations and challenges to focus and align key technology programs
Creates and leads IP efforts which are of strategic and material significance for long term technology and business vision
Provides technical expertise and business direction to establish scope across portfolio of projects
Provides advice on critical issues with top level officers of other organizations and companies
Provides advisory and consulting work for the organization as a recognized authority for broad program areas or highly specialized areas
Proactively collaborates with other personnel engaged in equipment design, maintenance, and operation to ensure safe, reliable deployment of high-performance solutions meeting customer requirements
Applies non-conventional concepts to oil field applications by collaborating with outside industries and universities
Mentor others on engineering designs and techniques by collaborating with other disciplines, product service lines and other industry experts
Participates in long term strategic Technology initiatives
Guides business decisions across locations and services by understanding multiple disciplines as related to oil industry
Communicates complicated technical concepts to non-technical managers and customers
Applies in-depth knowledge of applications to propose new platforms, systems and architectures
Cultivates a culture of collaboration to ensure that state-of-the-art technology is applied in the development of new customer technical solutions
Interact closely with suppliers to ensure performance, reliability and quality of components and subsystems
Participate in, make significant contributions to, and may provide leadership in professional societies
Participate in industry conferences and customer-facing events

Discipline-specific duties & responsibilities

Works “hands-on” with the relevant equipment and systems. This may be in the form of lab testing, full-scale testing, or field testing
Create specifications, procedures, installation instructions, test documents, etc
Reads and interprets electrical and mechanical drawings and diagrams, electrical schematics, piping, and instrument drawings (P&IDs), flow charts and cause and effect diagrams
Travels to active well sites, customer offices, vendor offices, training/conference venues, and other Halliburton offices as required. This is typically 20-25% of the time available
Travel may encompass weekends and holidays
Develops and negotiates system-level requirements and assists in financial analysis, ensures completion of technical and detailed product specifications, manages technical risks, and ensures product meets technical performance in a timely fashion
Develop system-level solutions for applications focused on hydraulic fracturing using electric power and/or other large-scale surface equipment technology for oilfield operations

Education, experience, and knowledge

Minimum of bachelor’s degree in electrical engineering with at least 16- 20 years of electrical systems engineering experience in relevant areas of practice as described below. Completion of a master’s degree in electrical engineering or similar discipline is preferred.
Experience in electrical system engineering using Medium/Low Voltage, and control systems for the upstream oil & gas industry with emphasis in well completion, stimulation, cementing, and/or offshore operations. Alternative experience in electrical drive systems for heavy industrial applications, surface mining, wind power generation, medium voltage power transmission, micro-grids and controls systems will be considered.
Hands-on experience in the development of applications of electrical equipment and systems.
Experience with large-scale industrial processes (chemical, pharmaceutical, mining, oil & gas refining).
Solid understanding of medium and voltage electrical engineering concepts, enclosure design, protection systems, and sensor/component design & selection.
Strong background and knowledge in different aspects of control system design, signal processing and analyses, feedback loops & system dynamics.
Understanding of industry certification standards such as ATEX and IECEx, as well as experience in implementing these standards into designs for use in hazardous environments.
Knowledgeable in the application of engineering tools and methodologies like Failure Modes and Effects Analysis (FMEA), Design of Experiments (DoE), Lifecycle, Patents creations, and Litigation process, etc.
Understands microgrids, utility electrical interfaces, generators, industrial electrical distribution, medium voltage switchgear, transformers, motor control centers, AC motors, Variable Frequency Drives and protection systems.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Houston, Texas

Job Details

Requisition Number: 200545
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
PSL: Production Enhancement
Full Time / Part Time: Full Time

Technician-L&P, Assoc (Macae, RJ, BR, 27930-070)

Job Duties

Sob supervisão rigorosa, realiza manutenção, solução de problemas, reparos e/ou substituições, alinhamento e manutenção de equipamentos elétricos e mecânicos de perfilagem, conforme as instruções. Requer familiarização com sistemas de superfície, ferramentas para poços abertos e revestidos e equipamentos de teste de laboratório. As tarefas do trabalho, quando executadas corretamente, têm impacto mínimo na viabilidade da organização. Erros são facilmente detectáveis pelo supervisor e podem ser corrigidos. As habilidades são normalmente adquiridas por meio de um diploma de nível técnico em eletrônica ou experiência elétrica relacionada. Treina diretamente sob a supervisão de um Diretor ou Técnico Sênior de Perfilagem e Perfuração, para adquirir conhecimento sobre equipamentos e ferramentas de perfilagem, em preparação para o treinamento formal em escola de manutenção.

Qualifications

Formação : Técnico Eletromecânica e Mecânica com CFT Ativo

Desejável conhecimento em equipamentos hidráulicos, válvulas e certificações

Pacote Office Intermediário

Inglês Básico

Residir em Macaé ou região.

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200765
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional / Senior Technical Professional - Artificial Lift (Tulsa, OK, US, 74104)

Job Duties

Under general supervision, assists in Artificial Lift proposal development, artificial lift application recommendations and post-well evaluation of AL performance.
Uses engineering design principles to design, recommend, and evaluate artificial lift systems.
Provides technical and operational assistance primarily to internal customers (business development and field operations).
Uses knowledge and application of engineering principles, artificial lift technology and processes to complete assigned projects.
Participates in developmental programs to accelerate learning.
Applies artificial lift design theory and uses company technical application software tools to execute projects.

Qualifications

Completion of an undergraduate degree in Engineering or Science and 2 years of industry experience, which includes artificial lift applications, required
Project management experience preferred
Ability to speak Arabic, Spanish or German as a second language is preferred

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additonal job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Technical Professional or Senior Technical Professional.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

835 W 41st St South, Tulsa, Oklahoma, 74104, United States

Job Details

Requisition Number: 200756
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

EC-Quito-PM602-ESG-Well Engineer, I-199706 (Quito, D, EC)

Job Duties

Under direct supervision, the Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management. Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.

Qualifications

Location

Av Amazonas N37-29 Y Villaleng, Quito, Orellana, , Ecuador

Job Details

Requisition Number: 199706
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Electrical/Mechanical Technician - Wireline & Perforating (Prudhoe Bay, AK, US, 99734)

Job Description

Job Duties:

Under strict supervision, services, troubleshoots, repairs and maintains electrical and mechanical logging equipment as directed by other experienced technicians.
Functions either as part of a preventive maintenance crew or individually.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.

Qualifications:

High school diploma or equivalent required.
Skills are typically acquired through an associate degree in electronics or related electrical and mechanical experience.
Experience with electrical and/or electro mechanical repair.

Additional Information:

Halliburton covers the first flight from the lower 48 to Anchorage, AK.
10% Alaska living allowance available to employee's whose primary residence is in Alaska.
5% Alaska living allowance available to employee's whose primary residence is outside of Alaska
Lodging and meals provided during scheduled work rotation
Position is eligible for a travel stipend of $700/month for employee’s whose primary residence is outside of Alaska.
Employee's residing outside of Alaska are responsible for coordinating their own travel to and from Anchorage, AK for their work rotation as well as their own transportation to and from the airport and the Halliburton facility in Anchorage.
2 weeks on 2 weeks off schedule or a 3 weeks on 3 weeks off schedule, with a Tuesday start date Halliburton reserves the right to adjust schedules based on industry needs.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

Pouch 340026, Prudhoe Bay, Alaska, 99734, United States

Job Details

Requisition Number: 200515
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US Zanesville: Cement Service Operator II (198174) (Zanesville, OH, US, 43701)

Job Duties

$1500 Sign On Bonus Available

Under direct supervision, operates all cement pumping and mixing equipment: blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Performs pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Sets-up and utilizes a controller to run ADC software for the purpose of monitoring and acquiring job data and for accurate mixing of cement slurries in the performance of a cementing job.
Downloads controller and/or performs real-time report generation of job data using the appropriate computer system.
Completes documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to less experienced Service Operators and Operator Assistants in the operation of some or all of the following: cement pumping and mixing equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, ADC systems, bulk cement blending, delivery and storage systems, manfolding equipment, and cementing plug releasing tools.
Assists in communicating the pre-job and on-the-job progress to customer.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes. A passing score on job-related tests or meeting task guidelines is required. Capable of being deployed to any rig in the work area

Qualifications

Skills are typically acquired through successful completion of high school or similar education and
1 year of experience as Service Operator-Cementing I.
Class A CDL is required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 198174
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Field Professional / General Field Professional - Logging and Perforating (Alvarado, TX, US, 76009)

Job Duties

Under general supervision, applies knowledge of Halliburton's Open Hole Wireline technologies to independently provide a comprehensive set of basic and complex services and tool operation to customers at the well site.
Applies engineering, mechanical and geological principles to articulate more complex data interpretations to clients from proprietary software and coaches clients through more routine drilling scenarios independently.
Continues to learn how to interpret data outcomes with more complexity through mentorship from wireline field leadership.
Integrates understanding of the wireline business, operational procedures and to a lesser degree the collaboration of other service lines into guidance provided to customers.
Provides guidance to junior wireline field professionals on delivering less complex services and tool operations to customers.

Qualifications

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 2.5 years of experience in Open Hole Wireline field operations required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Field Professional or General Field Professional.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

3045 CR 401, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 200854
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician I (Roma, QLD, AU, 4455)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications

A high school diploma or equivalent
one year of experience in a mechanical field is required.
A technical school certificate is preferred.

Location

Lot 9 Roma Downs Road, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 200576
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor - Cementing (Negara Brunei, BM, BN)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site handling the more complex, hazardous, and/or high profile jobs while providing quality service to the customer.
Job role may include sales, job design, execution, and follow up activities.
Cross trains and active participates in one or more product service lines.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Skills are typically acquired through a high school diploma, or similar education and 2 years of experience as Service Supervisor-Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Must meet the minimum developmental standards for this job classification.
Demonstrates proficiency in the operation and maintenance of each type of equipment/unit/tool normally used in the product service line.
Has exceptional skills within the service line and specific knowledge and understanding of other service functions.

Qualifications

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 200635
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Sales Advisor - Wireline (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under broad direction, utilizes expertise in specific aspects of a Product Service Lines' (PSL) technology and services portfolio to educate Customers, Operations, and Business Development (BD) on features, advantages and benefits of the PSL solution offerings. Under broad direction, the Technical Sales Advisor is accountable for Delivery Execution.
This entails utilizing a detailed knowledge base of specific sub-PSL products, services, and solutions in order to identify technical needs of customers through product knowledge and geographic understanding of challenges, aid the BD organization in pursuit of work through customer interaction and internal/external workshops, provide technical recommendations to BD for proposal preparation regarding solution up-sell, and aid operations and BD in the diagnosis and communication of solutions delivery issues.
Technical Sales Advisors help establish the strategic direction in the work area through clear understanding of the local customer's business drivers and technical challenges and are responsible for identifying and executing up-sell (POP Plan) strategies within a geography of responsibility.
Maintains an overview of the external market and Halliburton's marketing strategies by collaborating with the PSL, Region/Country Business Development, Account and Tech Teams to identify opportunities to grow profitable revenue and maintain awareness of the technology available from the PSL.
Provides input to PSL technology project priorities through the understanding of the market, customer's needs and technology gaps within the geographic customer base.
Executes tactical action plans as set by Country management team.
Must possess thorough understanding of the supported sub-PSL's technology and broad understanding of the associated development tools.
Understands and promotes the PSL's quality directives and ensures that completion or workover operations are performed in a consistent manner in compliance with all HSE and OE policies and best practices.
Requires completion of an undergraduate degree in Engineering or related discipline.
Minimum of 5 years of experience in energy services industry, preferably as a field professional.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 200786
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Truck Driver - Senior Heavy Truck Driver (200522) (Montgomery, PA, US, 17752)

Job Duties

Sign On Bonus Available

Local/regional routes may be available if living within an hour of our district/field location
Depending on job location, lodging and rotating schedule may be provided

Responsibilities:

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman
Reads and interprets instructions and documentation and plans work activities
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another
Loads and unloads vehicles
Observes and follows all safety rules and procedures, including wearing required personal safety equipment, and assists during the operation of well logging equipment at job site
Performs other duties and activities as directed

Education:

High school diploma or equivalent

Qualifications

Must have Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Able to communicate effectively with others
Basic reading comprehension and writing skills required
Able to lift up to 60lbs
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 200522
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Misc Support
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

University student (Santa Cruz, S, BO)

Job Duties

University student, studying last year of Engineering Career.
Intermediate level management of MS Excel.
Intermediate english level.

Qualifications

Location

Carretera Antigua a Cochabamba, Santa Cruz, Campobasso, , Bolivia (Plurinational State of)

Job Details

Requisition Number: 198720
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

T611-ESG-Lab Tech-Chemistry, Assoc (Siberia, CUN, CO)

Job Duties

Under direct supervision, trains and becomes familiar with the chemical hygiene plan and the current HSE laboratory safety standards. Follows prescribed safety rules and regulations in performing assigned duties. Performs duties to conduct prototype or laboratory tests following prescribed procedures. Learns to build equipment and/or perform basic material or environmental tests using basic techniques with electrical/electronic, chemical, and mechanical equipment. Learns to document test data for reporting purposes. Maintains files and documentation related to test equipment and test results of equipment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Skills typically through eight (8) hours of college chemistry (preferred).

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200681
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator II - Cementing (Evansville, WY, US, 82636)

***$1,500 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience

Potential Annual Earnings: $125,000+/yearly
- Average annual earnings are an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment *with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Position is eligible for a $300 monthly stipend based out of Casper, WY.
$45/day Per Diem
2 weeks on 1 week off schedule. *Halliburton reserves the right to adjust schedules based on industry needs.

Job Duties and Qualifications

Job Duties:

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies.
Learns to perform pre-job calculations related to pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports.
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers.
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

Skills are typically acquired through successful completion of high school or similar education.
6 months of experience as an Operator Asst-Cementing, II.
Class A CDL required.
May require I-Learn courses: General Hydraulics for Downhole Tools and Essential Preventative Maintenance.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

6900 Nugget Rd, Evansville, Wyoming, 82636, United States

Job Details

Requisition Number: 196524
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Accounting Supervisor (Houston, TX, US, 77032)

Job Duties

Under broad direction, responsible for coordinating and supervising staff employees in the activities supporting the general ledger, sub- systems, and related business systems and applications, along with the resultant financial statements.
Responsible for preparation, review, and accuracy of finance and accounting activities within the department, including executing financial close activities, reviewing and updating business practices, performing internal control self-assessments, preparing forecasts and annual business plans, business analysis, and performing ongoing process improvements.
Directs a group or section of accountants and/or administrative staff and administers personnel related functions including monitoring of performance and development objectives, and regular performance review discussions.
Advises management using diverse communication tools on key financial issues, financial performance, or financial processes.
Responsible for interpreting and applying company policy, controls, and accounting principles to financial transactions.
Demonstrates advanced functionality of common office environment, functional applications such as SAP and Hyperion, and relevant business applications.
Demonstrates project management skills and awareness of financial performance metrics such as CVA/NOVA.
Demonstrates strong knowledge in aspects of general accounting, internal controls and risk mitigation, company policy, financial analysis and statutory reporting, forecasting, and financial applications of varying complexity, as well as advanced levels of proficiency with industry and company acumen.

Qualifications

Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of seven (7) years of experience in accounting related roles.
Knowledge of US GAAP or country-specific accounting principles required.
Standard Cost Accounting experience preferred.
Experience forecasting and budgeting Capital Expenditures preferred.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200768
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Técnico en Reparación y Mantenimiento I (Cunduacan, TAB, MX, 86693)

Job Duties

Realiza reparaciones, mantenimiento preventivo, calibración e inspecciones en componentes electrónicos y mecánicos de herramientas de fondo de pozo y otros equipos utilizados en la aplicación de dichas herramientas, incluyendo sensores Direccionales/RSS y/o MLWD. Es responsable de asegurar que sus funciones se lleven a cabo de manera segura, eficiente y eficaz. Las áreas de especialización pueden incluir: aptitud mecánica, aptitud electrónica, habilidades informáticas, ensamblaje y desensamblaje de herramientas asociadas con el equipo o herramientas de medición mientras se perfora. Se requiere un certificado de finalización de Ingeniería Mecánica-Eléctrica, Electrónica o afín.

Qualifications

Location

Carretera Cunduacan-Comalcalco, Cunduacan, Tabasco, 86693, Mexico

Job Details

Requisition Number: 200842
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

PL35-ESG-Procurement Specialist (Siberia, CUN, CO)

Job Duties

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200881
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Performance Development Coordinator - HCT - 200652 (Mount Pearl, NL, CA, A1N 5B1)

Job Duties

Under broad direction, responsible for coordination, evaluation of needs, monitoring development, and/or providing guidance to individuals.
Reviews personnel performance data to identify trends and opportunities for improvement.
Mentors employees of the assigned area with competencies, training, onboarding, personnel evaluation, and processes related to Career Development.
Promotes and monitors alignment to these processes.
Interfaces, partners, and works effectively with Leadership and Talent Management relative to employee development and performance evaluation issues.
Supports the hiring process for assigned Product Service Line (PSL); in collaboration with Human Resources and Hiring Manager.
Visits field, labs, shops, and other locations to review people's performance and identify knowledge gaps.

Qualifications

Requires a high school diploma and 5+ years of operational or technical experience is required.

Location

16 Panther Place, Donovan's In, Mount Pearl, Newfoundlnd/Labrador, A1N 5B1, Canada

Job Details

Requisition Number: 200652
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Maintenance Foreman (200780) (Lafayette, LA, US, 70508)

Job Duties

Under general supervision, manages internal and external resources, organizes, and coordinates their associated activities for maintaining Halliburton equipment.
Directly manages shop activities and remote locations in order to meet equipment maintenance strategies as well as technical completion of work.
Executes plans for efficient use of staff, real estate, and equipment to meet asset availability, shop/remote location throughput, and reliability requirements for the relevant internal customers at the optimum cost.
Has direct accountability for adherence to HMS and the service quality delivery of the maintenance product on the shop floor as well as in remote locations.
Identifies gaps in training, quality, and safety adherence for personnel and equipment.
Collaborates with internal customers and other functions to ensure the efficient exchange of information and services.
Ensures adherence to, and accurate maintenance of, as well as input of, data into Halliburton's system of record for the responsible location(s).
Job role impacts on revenue center's viability or its quality of service through its personal contributions.
Job role contributes directly to internal value creation through cost management.

Qualifications

A High School diploma or equivalent is required.
Completion of an undergraduate degree in STEM and/or a technical certificate is preferred.
Five years of experience in manufacturing or maintenance operations is required.
Three years of lead/supervisory experience is preferred.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

100 South Park, Lafayette, Louisiana, 70508, United States

Job Details

Requisition Number: 200780
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Directional Driller, I (Macae, RJ, BR, 27930-070)

Job Duties

Under general supervision, provides on-site supervision of the Directional Drilling (DD) process including projection of well path to predetermined target coordinates. Serves in a subordinate role on any job. Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping and handling. Proficient in the use of DD computer software and able to assist in provision of advice and analysis to the client representative at the well site. This shall include all survey calculations and well path projections. Proficient in updating well profile plots and providing client representative with accurate directional survey data. Aware of client's requirements with regards to surveying procedures. Assists in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and relevant paperwork (well data spreadsheet, lesson learned/best practice, End of Job Customer Survey (EJCS) and Key Performance Indicator (KPI) forms). Familiar with the DD aspects of the client's approved drilling program. Assists in the inspection of all DD company equipment delivered on the work site. Interfaces with the MWD engineer to ensure BHA compatibility, planned operating parameters are within specification and correct toolface references are applied. Maintains records of all DD equipment at well site including dimensional data and condition. Ensure that all equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job. Participates in performance improvement initiatives. Requires a minimum of three years of field experience in Directional Drilling. Bachelor's Degree in a STEM discipline is required.

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 199334
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Maintenance Technician (Moomba, SA, AU, 5000)

Job Duties

This is an entry level position for maintenance personnel desiring a career path as a Mechanic or Electronic/Electrical Technician.
Under direct supervision, gains knowledge of routine preventive maintenance and basic repairs of a variety of Halliburton equipment.
Thereafter, assists maintenance technicians in performing more complex repairs prior to be broken out as a stand-alone Technician I.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of errors are easily measured and can be confined.
A high school diploma or equivalent is required.
A technical school certificate and relative technical experience are preferred.

Qualifications

Location

Santos Camp, Cooper Basin, Moomba, South Australia, 5000, Australia

Job Details

Requisition Number: 198644
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician II (Roma, QLD, AU, 4455)

Job Duties

Under general supervision, performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location.
Possesses intermediate diagnostic/troubleshooting knowledge and skills.
Performs advanced function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Knowledge of part identification and system search to enable accurate procurement of spares.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and mentors others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
A high school diploma or equivalent and 3 years of experience in related mechanical fields are required.
A Technical School certificate is preferred.

Qualifications

Location

Lot 9 Roma Downs Road, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 198645
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US-Houston-A802-ESG-Program Mgr, Global QHSE-199101 (Houston, TX, US, 77032)

Qualifications

EMPLOYER: Halliburton Energy Services, Inc.

Job Title: Program Manager Global QHSE

Job Location: 3000 N. Sam Houston Parkway East, Houston, TX 77032

Duties:

Responsibilities include: Provides leadership of Global HSE Explosives Safety Programs. Provides direction and oversight to program management processes, maintenance of program competencies, and Halliburton Management System documentation. Ensures strategic direction is in alignment with overall organization direction and maintains alignment with HSE/SQ regulatory and industry standards. Initiates, prioritizes and justifies various projects, processes, and/or initiatives supporting strategic direction. Lead cross functional teams within the product service lines, manufacturing and support functions in developing, prioritizing, and implementing various corporate HSE/SQ initiatives. Provides training to local and Region Explosives Safety Officers and conducts audits and inspections in locations across the globe. Interfaces with Manufacturing & Technology, Procurement & Materials, Corporate Security, Legal, Internal Assurance Services and operations personnel at all organizational levels, acting as an advisor and to a lesser extent as an auditor and instructor. Works closely with product and service line management to monitor and support obtaining necessary licenses and permits, incident review and response, development of training programs and associated materials. On a quarterly basis reports to the Global Explosives Safety Committee (Executive level) on key performance indicators.

Requirements: Employer will accept a Bachelor's degree in Engineering or related field and 3 years of experience in the job offered or in a Program Manager QHSE-related occupation.

Position requires experience in the following:

Experience in the energy services industry including operational experience in Wireline and Perforating including, maintenance, service delivery, asset and materials management, and operations management.
Experience implementing and leading local safety programs, assuring regulatory and internal process compliance.
Experience identifying potential risks to process reliability and safety and developing strategies to effectively mitigate issues.
Experience in internal audit and assessment processes.
Experience implementing internal systems and projects to improve process efficiency and compliance.
Experience with technologies such as Appian, Power PBI, Story Line and Excel Macros.

Contact: To apply, visit jobs.halliburton.com and enter #199101 in “search by keyword” field. If offered employment, must have legal right to work in U.S. EOE, including disability/veterans.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199101
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Mumbai, MH, IN, 400093)

Job Duties

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 200057
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician I (Roma, QLD, AU, 4455)

Job Duties and Qualifications

Under general supervision, performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location.
Possesses intermediate diagnostic/troubleshooting knowledge and skills.
Performs advanced function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Knowledge of part identification and system search to enable accurate procurement of spares.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and mentors others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
A high school diploma or equivalent and 3 years of experience in related mechanical fields are required.
A Technical School certificate is preferred.

Location

, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 196058
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP01-ESG-Operator Asst I-L&P (Macae, RJ, BR, 27930-070)

Job Duties

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200713
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

IT Applications Consultant (Houston, TX, US, 77032)

Job Duties

Under broad direction, responsible for overseeing the following functional areas, technology, major system, (e.g., process simulation, document management, payroll, etc.) and the development/acquisition, maintenance, and/or support of application(s) in that area.
Influence the assignment of personnel to various activities and provide performance feedback.
Leads and participates in the preparation of all requirements/specifications, estimates, system designs, and completed systems, and ensures that quality support is provided to customers and clients, often involves performing project setups, analyses, designs, etc., for/with customers.
Similar duties are often associated with the selection, acquisition, installation and configuration of applications licensed from third parties, and interaction with vendors is often required.
Researches and makes recommendations on software technology direction.
Prepare activity and progress reports for management and enforces compliance with administrative policies and procedures.
Position is considered and expert relative to the applications and work processes in one or more technology/functional areas and is capable of addressing the most complex issues, and representing the organization in dealings with internal customers and clients.
Performs own work and provides assistance to others as directed.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Job role contributes directly to value creation.

Qualifications

Skills are typically acquired through completion of an undergraduate degree in CS, MIS, BA, or Engineering and 12 years of experience or 16 years in Systems Development and/or Applications Support which includes experience in Analysis, Design, Programming, Product Selection, Support and/or Maintenance.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199646
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Information Technology
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Accra, AA, GH)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country-specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

14 Liberation Link, Accra, , , Ghana

Job Details

Requisition Number: 200503
Experience Level: Experienced Hire
Job Family: Finance & Accounting
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Coordinator- HSE (Mumbai, MH, IN, 400059)

Job Duties

Job Description:

1. Person must have minimum 5 years of experience in implementation of HSE strategies, policies, procedures, and processes in Upstream Oil & Gas Drilling & Completion Operation in onshore and offshore.
2. Person must be fluent in Hindi and English communication. (Read, Write and Speak)
3. Person must be aware about statutory requirements applicable in upstream oil & gas drilling operation in India e.g. OMR, OISD, PESO, PCB etc.
4. Develop and implement, project specific HSE bridging document, ERP, annual HSE plan.
5. Run campaign, conduct drills, inspections, and audit as per project annual HSE plan.
6. Prepare weekly and monthly HSE Reports.
7. Conduct project specific weekly safety meeting and participate in customer’s monthly safety meeting.
8. Person must participate in Hazard Identification and Risk Management to ensure effective controls are identified and in place.
9.STOP any unsafe work and develop culture among crew for same.
10.Co-ordinate HSE related matter with customer and contractor.
11.Carry out incident investigation, root cause analysis and identification and implementation of Corrective and Preventive Actions (CAPA).
12.Person must be well versed with Microsoft Office Package i.e. Word, Excel and Power Point.

Location: Navi Mumbai/ Kakinada – Ready to re-locate Barmer and other locations based on project requirement within India/ outside India.

Qualifications

Minimum qualification:

 M. Tech in HSE/ Industrial Safety or
 B. Tech in Fire & Safety/ Industrial Safety or
 Engineering/ Science Graduate + Diploma in Industrial Safety

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400059, India

Job Details

Requisition Number: 199039
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: HSE
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

K951-ESG-Tech Prof-Completions, Assoc (Neuquen, Q, AR, 8300)

Job Duties

Under direct supervision, provides technical and operational expertise to external customer in a professional manner. This is the entry level position for this discipline. Performs assignments requiring knowledge and application of basic engineering principles. Assists in the delivery of Completion, Products & Services (CPS) services. Assists in pre- planning, job execution, and post job analysis to ensure project success and efficiency. Participates in developmental programs to accelerate learning and to increase abilities relative to the successful implementation of PSL objectives. Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment. Undergraduate degree required – acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200037
Experience Level: Entry-Level
Job Family: Operations
PSL: [[division]]
Full Time / Part Time: Full Time

Power Distribution Electrical Technician (I- II) (Fort Lupton, CO, US, 80621-8345)

****$2,000 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience:

Power Distribution Electronics Technician I: $25.46 - $45.83/hourly
Power Distribution Electronics Technician II: $29.48 - $53.06/hourly
Hotel accommodations for 60 days for employees relocating to Fort Lupton, CO area.
- An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
Schedule:
- Shop: 10 days on/4 days off, occasional travel may be required.
- Field: 14 days on/7 days off (rotates day and night shifts), out of town & state travel is required as needed.

Job Description

Job Duties:

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Assist with rig up/rig down of electric frac equipment including making electrical connections (which includes heavy lifting of electrical cables), provides "ready-to-operate" job status to job site supervisor and suspends site operation if safe operation cannot be assured.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for repairs and/or replacement of three phase power distribution components up to 15,000 volts (medium voltage electricity), PLC hardware, and cabling.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations.

Qualifications:

A high school diploma or equivalent and 3 years of experience in an electrical field or oilfield operations are required.
A Technical Certification is preferred.
Compenent level troubleshooting, schematics, electrical theory skills preferred.
Must possess advanced computer literacy.
Must have a current and valid driver's license and a clean motor vehicle record.
Previous experience is preferred.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 200523
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: 7/31/2025

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

PL48-ESG-Logistics Specialist (Siberia, CUN, CO)

Job Duties

Under direct supervision, responsible for the movement of domestic and international goods in compliance with local and international law. Role requires knowledge of all possible movement constraints, experience in one or two transport modes (Ocean, Air or Land) and knowledge of hazardous movements. Coordinates pre-shipping instructions and works with service provider(s) on movements. Coordinates orders for shipment of cargo from point of origin to point of destination, to ensure product meets required delivery in the most efficient method, while interfacing with the customers to keep them apprised of progress. All files must be maintained per shipping requirements. Gathers data on value of the service provider and analyzes business&apos short-term needs while planning movement of shipments. Requires the use of logistics systems to perform job duties, and ensure correct and timely movement transactions. Responsible for recording data measurements to help follow trends in order to identify alternative ways to improve the moves and logistics services to the economic benefit of Halliburton. Responsible for packing, marking, labeling and measuring cargo to provide accurate weight & dimensions. This function will utilize SAP and other logistics systems to perform job duties, and ensure correct and timely movement. Job tasks performed correctly impact directly on cost containment, efficiency, profitability and/or operations. Requires the ability to assist F&A (finance and accounting) with validation of rates and charges on invoices. Requires completion of a two year degree or equivalent degree in Logistics, Supply Chain, Information Systems, or Engineering plus 1 to 2 years of experience in logistics. Bachelor&aposs degree preferred. IATA/IMDG certification may be required based on scope of work.

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200802
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Romania - Logging Geologist-SDL, Sr (Ploiesti, PH, RO, 107025)

Job Duties

JOB DESCRIPTION:

Under direct supervision, learns the job for the Surface Data Logging (SDL) service line for the purpose of providing on-location geological and drilling data collection and reporting to the customer.
Learns the basics of drilling theory and is oriented into the understanding of mud logging techniques and job duties.
Gathers drilled cuttings by depth intervals.
Responsible for the transportation of these cuttings. Keep records of intervals transported.
Keeps work area clean.
Will attend training and perform on the job development activities related to learning the basics of mud-logging, data collection and reporting and gas system operations.
Attends and completes induction courses as necessary.
Completes training appointments as necessary to obtain safety, offshore, or other operations, or customer specific certificates in order to be able to go the designated rig site(s).
Skills acquired through the completion of an undergraduate degree in a STEM discipline or Geology. Ability to demonstrate technical aptitude.
Must possess good communication skills, arithmetic, data entry and recording skills.
Must have successfully passed company tests, or met task guideline requirements.
This is an entry level position into the SDL service line for employees who have little to no experience in the petroleum, or related industries.
This is a field position.

Qualifications

Location

Comuna Aricestii - Rahtivani, Ploiesti, , 107025, Romania

Job Details

Requisition Number: 198674
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Aberdeen - INSITE Spec-SDL (Aberdeen, ABE, GB, AB21 0GN)

Job Duties

JOB DESCRIPTION:

Under general supervision, acts as the lead position responsible for the job execution and overall performance for the purpose of providing on-location geological and drilling data collection and reporting to the customer.
Responsible for company assets on location, and assures that adequate supplies and equipment are present at well site at all times.
Offers advice on equipment capabilities. Gathers accurate and factual logging information (Depth, Gas Units and Composition, Rate of Penetration, Lag Time, etc).
Interprets logging information to determine occurrence and composition of any oil and/or gas shows which occur while drilling.
Analyses and documents according to SDL zone of interest and/or show reports.
Provides lithological descriptions of all formations drilled and identify formation name, group, or member.
Assembles mud logging information into mud logs and drilling database following established SDL and/or customer guidelines and procedures.
Communicates mud logging information to customers as necessary to fulfill their requirements (morning report, show notification, engineering problems, delivery of mud logs).
Performs any specialized tests or gathers any additional data as required by the customer.
Gathers, assembles and assures timely delivery of sets of cuttings samples as per customer requirements.
Maintains transmittal sheets.
Performs safe, neat professional rig-up and tear-down when needed.
Ensure smooth transitions at crew changes and shift changes.
Completes training appointments as necessary to obtain safety, offshore, or other operations, or customer specific certificates in order to be able to go the designated rig site(s).
Skills acquired through the completion of an under graduate degree in Geology and a minimum of 2 years relevant field experience and completion of on the job development activities to acquire and demonstrate full competence in the job tasks as detailed in the competency system.
Ability to demonstrate technical aptitude to standards required. Must possess good communication skills, arithmetic, data entry and recording skills.
Must have successfully passed company tests, or met task guideline requirements.
This is a field position.

Qualifications

Location

Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom

Job Details

Requisition Number: 197635
Experience Level: Entry-Level
Job Family: Sales & Marketing
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Field Professional - Wireline (Kemaman, 11, MY, 24007)

Job Duties

Under general supervision, applies knowledge of Halliburton's Open Hole Wireline technologies to independently provide a comprehensive set of basic and complex services and tool operation to customers at the well site.
Applies engineering, mechanical and geological principles to articulate more complex data interpretations to clients from proprietary software and coaches clients through more routine drilling scenarios independently.
Continues to learn how to interpret data outcomes with more complexity through mentorship from wireline field leadership.
Integrates understanding of the wireline business, operational procedures and to a lesser degree the collaboration of other service lines into guidance provided to customers.
Provides guidance to junior wireline field professionals on delivering less complex services and tool operations to customers.
Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 2.5 years of experience in Open Hole Wireline field operations required.

Qualifications

Location

Whse 11, Kemaman Supply Base, Kemaman, Terengganu, 24007, Malaysia

Job Details

Requisition Number: 198650
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Técnico de Reparação e Manutenção I (Macae, RJ, BR, 27930-070)

Job Duties

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 198696
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

AL30-ESG-Tech Prof-Artificial Lift, Asso (Siberia, CUN, CO)

Job Duties

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200353
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Poland - INSITE Specialist -SDL, Junior (Krakow, OP, PL, 31-503)

Job Duties

JOB DESCRIPTION:

Under general supervision, acts as the lead position responsible for the job execution and overall performance for the purpose of providing on-location geological and drilling data collection and reporting to the customer.
Responsible for company assets on location, and assures that adequate supplies and equipment are present at well site at all times.
Offers advice on equipment capabilities.
Gathers accurate and factual logging information (Depth, Gas Units and Composition, Rate of Penetration, Lag Time, etc).
Interprets logging information to determine occurrence and composition of any oil and/or gas shows which occur while drilling.
Analyses and documents according to SDL zone of interest and/or show reports.
Provides lithological descriptions of all formations drilled and identify formation name, group, or member.
Assembles mud logging information into mud logs and drilling database following established SDL and/or customer guidelines and procedures.
Communicates mud logging information to customers as necessary to fulfill their requirements (morning report, show notification, engineering problems, delivery of mud logs).
Performs any specialized tests or gathers any additional data as required by the customer.
Gathers, assembles and assures timely delivery of sets of cuttings samples as per customer requirements.
Maintains transmittal sheets.
Performs safe, neat professional rig-up and tear-down when needed.
Ensure smooth transitions at crew changes and shift changes.
Completes training appointments as necessary to obtain safety, offshore, or other operations, or customer specific certificates in order to be able to go the designated rig site(s).
Skills acquired through the completion of an under graduate degree in Geology and a minimum of 1.5 years relevant field experience and completion of on the job development activities to acquire and demonstrate full competence in the job tasks as detailed in the competency system.
Ability to demonstrate technical aptitude to standards required.
Must possess good communication skills, arithmetic, data entry and recording skills.
Must have successfully passed company tests, or met task guideline requirements.
This is a field position.

Qualifications

Degree in geology is required.

Location

23 Lubicz Street, Krakow, , 31-503, Poland

Job Details

Requisition Number: 198584
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Professional -Optimization (Pune, MH, IN, 411001)

Job Duties

Qualifications

Location

Sai Radhe Building 100, 101, Pune, Monaghan, 411001, India

Job Details

Requisition Number: 198429
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Catu (BA) & Mossoró (RN) - Banco de Talentos Jovem Aprendiz (GEN) (BA, BR)

Ensino médio completo;
Pacote office.
Disponibilidade de 4hrs/dia (2ªf a 6ªf)

Responsabilidades

Nível de entrada para o trabalho profissional;
Tarefas administrativa

Localização
Catu (BA) & Mossoró (RN)

Detalhes da Vaga:
Número da Requisição: 195642
Período Integral/Meio período: Meio período

Location

, [[city]], , , Brazil

Job Details

Requisition Number: 195642
Experience Level: Apprenticeship
Job Family: Support Services
Product Service Line: N/A
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US Tulsa: R&D Mechanical Engineer (Associate - Senior) (Tulsa, OK, US, 74104)

Job Duties

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development. Assi
sts in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews.
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information. Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.

Qualifications

Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline.

Location

835 W 41st St South, Tulsa, Oklahoma, 74104, United States

Job Details

Requisition Number: 199640
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Artificial Lift
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP01-ESG-Operator Asst I-L&P (Barrancabermeja, SAN, CO)

Job Duties

Qualifications

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 200146
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP01-ESG-Operator Asst I-L&P (Barrancabermeja, SAN, CO)

Job Duties

Qualifications

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 200147
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional Associate - Completions (Negara Brunei, BE, BN)

Job Duties

Under direct supervision, provides technical and operational expertise to external customer in a professional manner.
This is the entry level position for this discipline.
Performs assignments requiring knowledge and application of basic engineering principles.
Assists in the delivery of Completion, Products & Services (CPS) services.
Assists in pre- planning, job execution, and post job analysis to ensure project success and efficiency.
Participates in developmental programs to accelerate learning and to increase abilities relative to the successful implementation of PSL objectives.
Requires the ability to analyze well site data in real time, using complex technologies such as software simulators and the latest electrical and mechanical equipment.
Undergraduate degree required – acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry.

Qualifications

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 200060
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

CDL Delivery Driver (I - II) - MultiChem (Roosevelt, UT, US, 84066)

***$5,000 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience.

Delivery Driver I: $17.41 - $31.33/hour
Deliver Driver II: $18.24 - $32.3/hour
Position is eligible for a $300/month stipend based out of Roosevelt, UT.
$45/day Per Diem.
Work schedule: Monday-Friday with weekends as needed (Halliburton reserves the right to adjust schedules based on industry needs).

Job Description

Job Duties:

Under general supervision, the Delivery Truck Driver I loads the truck and delivers chemicals to the customer location in a safe manner following all laws, company policies, and customer policies.
Ensures that the truck is in good working order by completing the pre-trip inspection, ensures that the logs and timesheets are up-to-date and that the shipping documents and all vehicle documents are current and in the truck.
After arriving to the location, the driver unloads the truck by dropping off drums or pumping chemical off of the truck into bulk tanks.
After completing all of the deliveries, the driver will do a post trip inspection and remove any empty containers from the delivery truck so that chemicals can be loaded for the next day.
May perform minor maintenance to truck and will keep truck clean and washed.
Driver is responsible for forklift operations/ensuring that the load is secured and ensuring that the bills of lading and shipping documents are documented properly.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications:

High school diploma or equivalent required.
Class A Commercial Drivers Licensure with HAZMAT endorsements required.
Minimum of 6 months of experience in DOT HAZMAT driving experience.
6 months of oilfield experience preferred.
Must be able to pass Homeland Security background check.

World Class Benefits

Medical, dental, vision, coverate in additional to life and disability insurance plans.
Paid Vacation Days, Paid Holidays and the ability to purchase additonal days off.
Retirement and Savings (401K) Plan with matching contribution.
Family Care Program including paid time off to care for sick or injured immediate family memebers, adoption reimbursement, paternal and maternal leave for baby bonding and more.
EMployee Job Referral Bonus Program.
Employee Stock Purchase Program.
Educational Assitance.

Location

1661 W Highway 40, Roosevelt, Utah, 84066, United States

Job Details

Requisition Number: 199610
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Principal Logistics Specialist - EDI Analyst (Houston, TX, US, 77032)

Job Duties

Must have firsthand EDI development experience.
Coordinating with trading partners to set up new EDI integrations and manage existing ones.
Work with internal/external stakeholders to effectively Monitor EDI transactions to ensure timely and accurate processing.
This role will engage and build strong relationships with business partners, external vendors, and various IT Teams by using project management and problem-solving skills.
Candidate responsible for internal testing and end to end user acceptance testing.
Developing and implementing EDI specifications and mapping.
Understands business requirements and liaises with freight forwarders.
Role requires full understanding and proactive engagement to mitigate constraints to execution of shipments, including but not limited to hazardous cargo.
Collaborates with logistics service providers on all services failures to find the appropriate and creative solution to ensure goods make the final destination in a timely manner, while maintaining a competitive edge.
Analyzes data and recommends continuous improvement activities to drive value and performance for business leaders.
May participate in Lean Six Sigma events.

Qualifications

Must have 3-5 years of EDI experience.
Advanced knowledge of software programming and coding languages including, XML, CSV, and SQL
Knowledge of QlikSense is a plus.
Requires completion of undergraduate degree or equivalent in Supply Chain, Logistics, Information Systems or Engineering, and 3 to 5 years of experience in related field of logistics with working knowledge of at least two to all transport modes (Ocean, Air or Land).
Knowledge of Hazardous movements preferred. IATA, IMDG and CFR49 may be required based on scope of work.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 198399
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Telemetry Engineer (Principal - Senior Advisor) 198734 (Carrollton, TX, US, 75006)

Job Duties

Subject matter expert in digital communication areas especially in digital modulation/demodulation, channel coding, synchronization and equalization, pulse shaping and match filter design
Working knowledge of acoustic telemetry systems and accompanying signal processing algorithms
Knowledge of detection and estimation theories
Uses engineering techniques to predict performance of telemetry systems & develop adaptability, in changing conditions, and works with the multi-disciplinary team to mitigate system design risks
Uses laboratory hardware equipment and software tools or applications to perform routine analysis to predict performance of electronic circuits or control systems and identifies design improvements by evaluating results
Define, develop & test diagnostics for telemetry hardware
Develops design documentation and presents to stakeholders in design reviews, as required by Halliburton lifecycle process, and seeks approval
Develops creative/innovative solutions and new technology
Serves as a mentor to junior technical staff personnel
In addition, knowledge of digital circuit design, mixed signal circuit design, signal conditioning, or power supply design is a plus
The ideal candidate will have a MS or PhD in electrical/electronic engineering or appropriate combination of education and experience; a solid history of technical accomplishments; a demonstrated ability to commercialize technology; demonstrated ability to conceive of and develop creative/innovative technology; and over 7 years of successful industrial experience in similar environment
Previous experience with development of acoustic telemetry systems is highly desirable
Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline and 6 years of related experience. Completion of a master's or doctoral degree in Electrical Engineering or similar discipline is preferred

Location

2550 Country Club Dr, Carrollton, Texas, 75006, United States

Job Details

Requisition Number: 198734
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

MW04-ESG-Field Prof-MWD, I (Neuquen, Q, AR, 8300)

Job Duties

Under direct supervision, provides on-site supervision of the Measurement-While-Drilling (MWD) process, including tool preparations, data acquisition, log generation and Quality Control (QC) and delivery of the services to the customer. Serves as a second man in a sub- ordinate role. Assists in ensuring that all data presented to the customer is accurate, timely and meets the highest service quality standard possible. Assists in ensuring that expected and needed data and possible problems are provided to the customer. Assists in providing technical consultation to all of Halliburton&aposs clients. This includes mud hydraulics, Bottom Hole Assembly (BHA) planning, formation evaluation, drilling tendencies, the mud system and BHA dynamics. Properly tests all tools and equipment before, during and after each job. Identifies and corrects operational problems to prevent or minimize service impact. Assists in accurately completing all required forms, databases and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI)). Ensures BHA&aposs are assembled as planned, including correct make-up torque, doping and handling. Aware of customer requirements regarding directional survey procedures. Assists in interfacing with the Directional Driller (DD) to ensure BHA compatibility, planned operating parameters are within specification and correct tool face references are applied. Participates in performance improvement initiatives. Requires completion of a high school diploma or equivalent, and a minimum of three months of field experience in MWD. Bachelor&aposs Degree in a STEM discipline is preferred. Requires completion of the basic M/LWD training program. Must have successfully passed company tests, or met task guideline requirements. Ability to demonstrate technical aptitude to required standards. Must possess good communication, arithmetic, data entry and recording skills. Requires ability to read and interpret formation well logs and interpret directional survey information and other well site data. Must possess relevant on and offshore safety certificates. This is a field position.

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200490
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

DV03-ESG-Field Prof-DD, II (Neuquen, Q, AR, 8300)

Job Duties

Under general supervision, provides on-site supervision of the Directional Drilling (DD) process including projection of well path to predetermined target coordinates. Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA&aposs are assembled as planned including correct make-up torque, doping and handling. Proficient in the use of DD computer software and able to assist in provision of advice and analysis to the client representative at the well site. This shall include all survey calculations and well path projections. Proficient in updating well profile plots and providing client representative with accurate directional survey data. Aware of client&aposs requirements with regards to surveying procedures. Assists in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and relevant paperwork (well data spreadsheet, lesson learned/best practice, End of Job Customer Survey (EJCS) and Key Performance Indicator (KPI) forms). Familiar with the DD aspects of the client&aposs approved drilling program. Assists in the inspection of all DD company equipment delivered on the work site. Interfaces with the MWD engineer to ensure BHA compatibility, planned operating parameters are within specification and correct toolface references are applied. Maintains records of all DD equipment at well site including dimensional data and condition. Ensure that all equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job. Participates in performance improvement initiatives. Requires completion of a high school diploma or equivalent, and a minimum of three years of field experience in Directional Drilling, L/MWD, or SDL, with at least six months in DD. Bachelor&aposs Degree in a STEM discipline is preferred. Requires ability to read and interpret designed well plans, directional survey information and other well site data. Ability to demonstrate technical aptitude of required standards. Must possess good communication, arithmetic, data entry and recording skills. Must possess relevant rig safety certificates. This is a field position.

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200486
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Payroll Specialist (Bengaluru, KA, IN, 560103)

Job Duties

Under general supervision, functions as a senior member of a Payroll Unit, whose primary responsibility is the processing of employee payrolls, which includes HR and Payroll data gathering, processing, accounting, internal reporting, audit, and external reporting and remittance of all applicable wages and taxes. The incumbent is knowledgeable on changes in prevailing wage-hour and payroll tax laws for all jurisdictions/locations in which Halliburton has operations, particularly as they relate to the assigned area of responsibility. Responsible for complex projects and required to produce proper supporting documentation related to applicable payroll reports, audits, accounting, and tax filings. Responsible for the preparation of adequate documentation in support of internal controls as directed by the process guidelines. Responsible for analysis, reconciliation, and ultimate resolution of a variety of payroll issues. Provides support and guidance as a Subject Matter Expert on complex queries and issues to provide resolution to the team and stakeholders. Provides support to the leadership and team as required to mitigate peak volume bottlenecks. Provides peer training to newer team members. Actively looks to streamline process to drive standardization and efficiency of resources utilized. A high school diploma or equivalent and a minimum of 4 years of relevant work experience required. A Bachelors Degree is preferred. This is a senior level individual contributor role.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 200440
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Svc Spec, Assoc (Tianjin, TJ, CN, 300457)

Job Duties

Under strict supervision, provides on-site supervision of the Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) processes, including tool preparations, data acquisition, and delivery of the services to the customer. This is the entry level position for the Field Service Specialist job family. Responsibilities are to learn the job role for the product service lines and the processes, tools, software, and equipment used in service delivery, including but not limited to: maintaining equipment inventory, supervising movement of equipment to and from well site, checking equipment and tools, advising on repair requirements, and maintaining the computer drilling database for on-going jobs. Provides technical and operational consulting to external customers. Performs assignments requiring knowledge and application of basic engineering and MWD/DD principles. Skill acquired through completion of the basic M/LWD and DD training programs. Requires completion of a high school diploma or equivalent. An undergraduate degree in a STEM discipline is preferred. Must possess or be able to obtain relevant on and offshore safety certificates.

Qualifications

Location

No. 160 Dongting Road, TEDA, Tianjin, Tianjin, 300457, China

Job Details

Requisition Number: 200210
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Svc Spec, Assoc (Tianjin, TJ, CN, 300457)

Job Duties

Qualifications

Location

No. 160 Dongting Road, TEDA, Tianjin, Tianjin, 300457, China

Job Details

Requisition Number: 200208
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician (Vung Tau, 43, VN)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
A high school diploma or equivalent and one year of experience in a mechanical field is required.
A technical school certificate is preferred.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 199294
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor - Cementing (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Skills are typically acquired through a high school diploma, or similar education and one year of experience as Service Operator-Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Candidate must meet the minimum developmental standards for this job classification.
Has necessary working skills within the service line and a general understanding of other service functions.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 200621
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Vedlikeholdstekniker- Internal Equipment Maintenance (Stavanger, 11, NO, 4065)

Vi har en ledig stilling ved vårt Cementing Casing Equipment verksted i Tananger. Verkstedet gjør vedlikehold og service av utstyr som brukes i forbindelse med sementeringsjobber. Stillingen vil i stor grad bestå av klargjøring til service og sertifisering.

Vi søker etter en som kjenner seg igjen i våre verdier: sikkerhet, tillit, samarbeid, integritet og respekt.

Arbeidsoppgaver:

Hovedoppgavene vil bestå av rengjøring inspeksjon, vedlikehold og testing av Commander cement heads, Wireless remote control system, plug containers , Equalizing swivels, swages og annet relatert utstyr. I tillegg vil følgende arbeidsoppgaver kunne påregnes:

Pakking av utstyr i lastebærer etter Norsok NOG116.
Forefallende arbeid
Demobilisere etter endt jobb.

Vi tilbyr:
Konkurransedyktige pensjons- og forsikringsordninger
Helseforsikring/behandlingsforsikring
Gunstig aksjespareordning
Fokus på teknologi og utvikling
Dyktige kolleger i et internasjonalt arbeidsmiljø

Kvalifikasjoner:
Mekanisk fagbrev

Truck (T1-T4) og traverskran (G4).
I denne stillingen kreves det at man behersker norsk og engelsk skriftlig og muntlig.
Erfaring med torque maskin.
Trykktesting kurs.
Pakkekurs NOG116
Førerkort klasse B

Personlige egenskaper:
Stillingen forutsetter at du med største selvfølgelighet følger bedriftens HMS prosedyrer.
Du må være i god fysisk form da stillingen kan være fysisk krevende.
Evne til å jobbe selvstendig og styre egen arbeidshverdag.
Ha god struktur og kunne håndtere en hektisk hverdag.
Kandidatene bør ha gode kommunikasjons- og samarbeidsevner

English version:

We have a vacancy at our Cementing Casing Equipment workshop in Tananger. This workshop conducts maintenance and service on equipment for Cementing jobs. The position will largely consist of preparation for service and certification.

We are looking for you who recognize our values: safety, trust, cooperation, integrity and respect.

Job description:
The main tasks will be cleaning inspection, maintenance and testing of Commander cement heads, Wireless remote control system, Plug containers, Equalizing swivels and other related equipment. In addition. The following task could be expected.

Packing of equipment in containers according to NOG116
Preventive work
Demobilization after job

We offer:
Competitive pension- and insurance scheme

Company health service

Beneficial employee stock-purchase plan

Focus on technology and further development

Highly skilled colleagues in an international environment

Qualifications:
Mechanical certificate.
Forklift (T1-T4) driver license and overhead crane (G4).
In this position it is important that you understand Norwegian and English both written and orally.
Experience with torque machine.
Pressure testing training.
NOG116 Training.
Driving license class B

Personal qualities:
The position requires that you champion the Company's HSE procedures.
You must be in good physical condition as this position can at times be physically demanding.
Able to work independently and manage your own work day.
Have good structure and able to handle a hectic workday.
Candidates should have good communication and collaborative skills.

Location:
Eldfiskvegen 1, 4056 Tananger, Norway

Product Service Line:
Internal Equipment Maintenance
Full time, duty and shift rotation can be expected

Contact Persons:

Hiring Manager: Knut Nilsen (+47) 51 83 72 95

Deadline: 17th August 2025

US Zanesville: Service Operator I - Frac/Acid-200121 (Zanesville, OH, US, 43701)

Job Duties and Qualifications

Under direct supervision, performs equipment rig up and rig down on location and prepares equipment for performing a job.
Ensures customer satisfaction with work performed.
Responsible for safe operations of service equipment, including but not limited to: DME, high pressure pumps, and/or blenders during the delivery of services in accordance with the customer's job design and KPIs.
Performs necessary calculations at the well site as needed.
Performs data collection and data distribution on jobs as needed.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Utilizes competency processes to enhance skills development and job performance.
Must be knowledgeable of HMS and HSE standards.
Promotes and contributes to safety awareness and environmental consciousness.
Promotes and takes an active part in quality and continuous improvement processes.
Consequences of error are easily measured and can be confined.

Qualifications:

Requires completion of a high school diploma or equivalent.
Must have Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Completion of Operator Assistant II – Frac/Acid competencies, or similar level of competence from previous industry experience.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200121
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus mayeb be subject to certain conditions and approvals by area leadership.

Aberdeen - Geoscientist III (Aberdeen, ABE, GB, AB21 0GN)

Job Duties

JOB DESCRIPTION:

A technical expert capable of functioning effectively under broad direction.
Capable of leading a project or leading and coaching 5 to 10 employees at various levels of competence in the relevant technical domain(s).
Accountable for the use of best practice work processes, project, quality and commercial management.
Recognizes and exploits the talents of his/her staff and demonstrates commitment to their competencies and career development.
Is frequently involved in customer engagements and regularly contributes to business development activities.
Gets involved regularly in budgeting and financial control; and is active in strategy development.
Effectively exploits a global network of professional contacts and typically contributes to 1 to 5 multi-disciplinary projects simultaneously within the geographical region.
Functions at role model level in terms of consulting practice development, project delivery and business development.
Requires an undergraduate degree in STEM (Science, Technology, Engineering and Mathematics) and a minimum of 10 years of experience.
A graduate degree is preferred.

Qualifications

Location

Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom

Job Details

Requisition Number: 200750
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior QA/QC Inspector - Associate QA/QC Coordinator (Spring, TX, US, 77386)

Job Duties

Under broad direction, supervises and performs inspection of various site operations activities.
Manages department throughput and keeps track of aging Quality lines pending inspection
Captures non-conformances in incoming materials and collaborates with accountable departments to ensure timely corrective actions
Leads daily Quality morning meetings and conducts Gemba walks with team members and leadership
Oversees calibration and outsourcing of active test equipment to maintain accuracy and compliance
Performs final inspection on tools assembled by the Production team to ensure quality and specification compliance
Generates reports of conditions found during inspection activities, notifies operations and Quality Assurance/Quality Control management of significant problems, completes documentation necessary to attest to satisfactory completion of inspection or test activities.
Will assist in developing, deploying and monitoring company established quality management goals, objectives and performance measures.
Will make recommendations and implement improvements to the company's quality management program.
Performs CMM programming, setup, and dimensional inspection of parts.

Qualifications

Completion of a high school diploma or GED and a minimum 3 years of experience is required.
5-8 years of experience which includes Quality and/or Industry experience is preferred.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior QA/QC Inspector, or Associate QA/QC Coordinator.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

445 Woodline Drive, Spring, Texas, 77386, United States

Job Details

Requisition Number: 200293
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

SPE01-ESG-R&M Electrical Tech I (Siberia, CUN, CO)

Job Duties

Qualifications

Location

Kilometro 1.5 Via Bogota , Siberia, , , Colombia

Job Details

Requisition Number: 200809
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Luanda, LUA, AO)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

Base Sonils,P.de Luanda/CP3736, Luanda, Luanda, , Angola

Job Details

Requisition Number: 199781
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Junior Geoscientist (Abingdon, ABE, GB, OX14 4RW)

Job Duties

We are looking to recruit a Geoscientist to work within our Subsurface teams based in our Abingdon office, Oxfordshire.

Essential Skills:

An honours degree (2:1+) and ideally a postgraduate degree in Geology (at least MSc level)
Data analytical skills and knowledge of databases
Ability to deliver high quality geoscience interpretations to time and standard
Experience with GIS technologies such as QGIS, ArcGIS
A professional attitude and a willingness to learn
Comfortable working within a team and contributing to the geoscience and technological discussions within the company

Desirable skills:

Experience of wireline and seismic interpretation would be highly advantageous
Experience with coding and analytical languages such as Python, SQL, PostgreSQL etc.
Strong communication skills
Some experience with sequence stratigraphy

Responsibilities include:

Population of geoscience databases
The interpretation of well, outcrop and seismic data
Making interpretative geoscience contributions towards the digital twin
Generation of regional geological interpretations, including paleogeographic maps, depth frameworks and common risk segment maps (in ArcGIS and DecisionSpace as required)
Delivering technical presentations to clients and colleagues
Ensuring standards and quality.

Qualifications

Skills acquired through the completion of an undergraduate degree in Science or Engineering.

Location

97 Jubilee Avenue, Milton Park, Abingdon, Oxfordshire, OX14 4RW, United Kingdom

Job Details

Requisition Number: 200335
Experience Level: entry-level
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Commuter - MPD Operations Consultant - Brazil (Macae, RJ, BR, 27930-070)

Job Duties

Perform Managed Pressure Drilling (MPD) operations by operating well control and measurement systems;
Monitor, collect, record, and analyze well data during drilling and completion operations;
Assist in the maintenance of MPD equipment at the worksite and in the workshop, when necessary;
Support the management of MPD assets and inventory;
Assist in the Load Out and Back Load processes of assets and spare parts for the client.

Qualifications

Bachelor's degree in Mechanical, Electrical, Petroleum, Control and Automation, Chemical, or Production Engineering (with active professional board registration);
Experience with Managed Pressure Drilling (MPD) operations;
Intermediate to advanced proficiency in English;
Availability for a 28 x 28 rotation schedule;
Mixed work regime (onshore and offshore).

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200676
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Consultor de Operações MPD (Macae, RJ, BR, 27930-070)

Job Duties

Executar operações de Managed Pressure Drilling (MPD), operando os sistemas de controle de poço e de medição;
Monitorar, coletar, registrar e analisar dados de poço durante as operações de perfuração e completação;
Auxiliar na manutenção dos equipamentos de MPD no local de trabalho e na oficina, quando necessário;
Apoiar na gestão dos ativos e inventário de MPD;
Assistir nos processos de Load Out e Back Load de ativos e peças sobressalentes para o cliente.

Qualifications

Graduação em Engenharia Mecânica, Elétrica, Petróleo, Controle e Automaçao, Quimica ou Produção (Registro de Conselho Ativo);
Experiência com operações de Managed Pressure Drilling (MPD);
Proficiência intermediária/avançada em inglês;
Residir em Macaé ou região;
Regime misto (onshore e offshore).

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200381
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Power Distribution Electrical Technician (Associate - II) (Alvarado, TX, US, 76009)

Job Duties

This is an entry level position for maintenance personnel desiring a career path as a Power Distribution Technician(PDT).

Under direct mentorship, a PDT Associate will gain knowledge of preventive/predictive maintenance, diagnostics and repairing a variety of electronic and/or electrical equipment relative to their assigned location.
Assist mentor with LOTO of equipment and function testing to verify equipment readiness.
Must have a basic understanding of electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Assist with rig up/down of electric frac equipment including making electrical connections which includes deploying of medium voltage electric cables).
Assist mentor with identifying unsafe conditions and suspending site operations until conditions are safe.
The role is a developmental role that will work around three phase power distribution components up to 15,000 volts (medium voltage electricity), PLC hardware, and cabling.
This role is developmental role through OJT and trainings.
It is expected that someone in this role is able to break out as an independent PDT within 1 year of start.

Qualifications

A high school diploma or equivalent required
Technical certificate in applicable discipline is required

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Power Distribution Electrical Technician, Power Distribution Electrical Technician I, or Power Distribution Technician II.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

3045 CR 401, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 200117
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant - Sand Control (Negara Brunei, BE, BN)

Job Duties

Under strict supervision, assists during the rigging up and down of Sand Control service line equipment on work locations for the purpose of providing Sand Control pumping services at the well site.
Learns basic Sand Control operations to include but not limited to: (1) performing pre/post job equipment inspections, (2) performing and completing preventative maintenance procedures, (3) maintaining and operating sand control support equipment (i.e., pumps, blenders, treating lines, etc.) and (6) completing sand control prerequisite training (essential math, essential red book, safety training, etc.).
Assists in assembly and preparation of equipment for installation and service.
Assists in the running of a job and in the clean up, repair, and preparation for the next job.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Skills are typically acquired through completion of high school or similar education and 3-6 months experience as an Operator Asst-Sand Control, I.
Must have successfully passed company tests or met task guideline requirements.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
Licensure to drive commercial vehicles may be required.
This is the entry level position into the Service Operator job family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.

Qualifications

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 200163
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor - Slickline (Negara Brunei, BE, BN)

Job Duties

Under general supervision, leads a crew in providing the least complex slickline services in a geographic area.
Is accountable for onsite customer satisfaction.
Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job.
Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed.
Performs onsite emergency unit/equipment maintenance as needed.
Demonstrates knowledge of pre and post-job product and service activities (employee's ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Trains service operators and operator assistants in areas of expertise.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc.
Completes all well site and post-job paperwork.
Participates in post-job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Develops his/her knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings.
Develops customer service, negotiation and leadership skills.

Qualifications

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 200044
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronic Technician (I-III) - Maintenance (Alvarado, TX, US, 76009)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Must possess advanced computer literacy.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications

A high school diploma or equivalent required
1 year of experience in an electrical field is required; Technical Certification is preferred.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Electronic Technician I, Electronic Technician II, or Electronic Technician III.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

3045 CR 401, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 200120
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional Associate - Sand Control (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Under direct supervision, develop skills to allow for technical interpretation and operational assistance at the wellsite during fracpac, sand control, and matrix acidizing operations in a professional manner.
Assists in pre job planning, pre job quality assurance and control, field level execution, and post job documentation as on the job training.
Assists in the delivery of Sand Control services.
Works alongside operations to develop equipment based knowledge. Requires ability to interpret well site data.
Knowledge will be built through completion of courses based on equipment training, fracturing methods and materials, data acquisition, fracture mechanics, pressure analysis while pumping, diagnostic pumping, fluids evaluation, and sand control theory.
This is an entry level position.
Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline is required.

Qualifications

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 200178
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator - Slickline (Negara Brunei, BE, BN)

Job Duties

Under direct supervision, assists the Service Supervisor during all phases of providing slickline services.
Assists with pre-job product and service equipment preparation (assembly, test, mobilization) and service performance at the well site.
Assists with post-job mobilization, clean up and repair of service equipment and products.
Repairs/redresses well pressure control equipment in preparation for the next job.
Assists with process documentation as prescribed by HMS.
Applies all relevant company HSE policies and procedures in all aspects of the job.
Given the nature of oil field service work, all employees must be able to execute written and verbal instructions and effectively exchange information with peers and superiors that will increase the likelihood of job success.
Every employee must be able to work as an effective team member.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is also required.
Basic reading comprehension and writing skills are required as well.
Basic computer skills are preferred.
This is a development position with the expectation that all Service Operators will advance to the Service Specialist position.
Develops and demonstrates general knowledge of all slick line services and related products.
Develops and demonstrates in-depth knowledge of the slick line tools and related products provided in his/her geographic area.
Develops and demonstrates WPCE operation and maintenance knowledge and skills.
Develops and demonstrates a working knowledge of slickline unit operation (engine, drive train, and hydraulics), minor unit maintenance, and process documentation required during prepare resources, mobilization, perform services and demobilization mainstay processes.

Qualifications

Location

F18, Lorong 4, Seria, Negara Brunei, , , Brunei Darussalam

Job Details

Requisition Number: 200043
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sr. R&D Chemist- Drilling Fluids (Pune, MH, IN, 411001)

Job Duties

Autonomously performs research and development activities and recognizes exceptions to normal chemical trends. Guides new employees on chemical compliance and lab safety by understanding key regulatory organization and policies. Champions development of new technologies and products which contributes to long term technology and business vision. Directs projects by evaluating project risk and assessing what is appropriate, reasonable, timely, and realistic. Delivers innovative ideas by contributing to Halliburton&aposs Intellectual Property portfolio. Creates an impactful relationship with Halliburton&aposs technical community, customers, and vendors by proactively collaborating with key stakeholders. Participates in professional societies in area of specialization. Skills acquired through the completion of a degree in Chemistry, similar discipline. Minimum educational requirement Doctoral degree and zero or more years&apos experience or Master&aposs degree and two or more years&apos experience or Bachelor&aposs degree and four or more years&apos experience.

Qualifications

Location

Sai Radhe Building, Pune, , 411001,

Job Details

Requisition Number: 200021
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

HSE Coordinator (Boroko, NCD, PG)

Job Duties

Under direct supervision of Operations leadership, the Coordinator is responsible for the implementation of health, safety and environmental policies, procedures and guidelines as instructed.
Duties are likely to be within a defined project, work site or geographic location.
Activities include, but are not limited to, hazard identification and risk management, incident reporting, investigation and causal analysis, waste minimization, pollution prevention and control, emergency response, and various compliance activities in all areas of HSE.
Provides oversight of the integrated management system (HMS) that at a minimum meets the needs of the company and the requirements of industry standards.
Conducts and participates in internal, regulatory, and customer audits and inspections.
Record-keeping and other general administrative duties are likely.
Provides technical advice, data interpretation, training, and process improvement

Qualifications

Requires an Undergraduate Degree in an HSE related field, Science, or Engineering
Three years of experience in Oil & Gas, or Manufacturing.

Location

P. O. Box 6388, NCD, Boroko, Papua New Guinea, , Papua New Guinea

Job Details

Requisition Number: 200949
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: HSE
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tax Manager (Houston, TX, US, 77032)

Job Duties and Qualifications

Assist with preparation and review of quarterly and annual global income tax provision in accordance with ASC 740, including preparing support for Form 10-Q and 10-K tax footnote and disclosures.
Prepare tax provisions package for external auditors.
Work with Senior Tax Manager in preparing and reviewing tax forecast.
Maintain and prepare documentation for tax forecast system.
Prepare quarterly intercompany asset transfer and inventory transfer reconciliations and record quarterly tax provision journal entries.
Responsible for activities supporting the financial close process, account reconciliations, and collection of supporting financial pronouncements and tax technical research, as applicable.
Maintain SOX documentation to ensure procedures over internal controls follow company business practice.
Work closely with tax compliance, accounting, and finance departments to gather necessary data and ensure accurate reporting.

Requirements

Requires an undergraduate degree in Accounting or related field and 7 years related experience and/or equivalent combination of education and competency.
Masters degree in Tax preferred.
CPA preferred.
Experience with SAP, OneSource, Alteryx, and Power BI preferred.
Excellent personal communications skills and ability to work in team environment a must.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 196516
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Supervisor, Repair & Maintenance (Ploiesti, PH, RO, 107025)

Job Duties

JOB DESCRIPTION:

Under broad direction, supervises a repair and maintenance facility by organizing and coordinating activities involved in maintaining and repairing down-hole, electronic, and surface equipment for one or more product lines.
Ensures equipment is maintained according to global maintenance standards.
Mentors employees on proper operation and maintenance of equipment.
Oversees training and development of technicians.
Ensures compliance with HSE regulations and guidelines and that safety procedures are followed during the repair process.
Orders and efficiently maintains an adequate inventory of parts and supplies to ensure timely maintenance.
Promotes continuous improvement of shop processes.
Areas of specialization may include mechanical or electrical aptitude and performing major repairs & maintenance.
Assists in making evaluations and recommendations for improvements on equipment based on maintenance history.
Requires an Associate's Degree, or equivalent, and a minimum of five years of experience, including as an equipment repair and maintenance technician. Management experience is preferred.

Qualifications

Location

Comuna Aricestii - Rahtivani, Ploiesti, , 107025, Romania

Job Details

Requisition Number: 200787
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

US Zanesville: Operator Assistant II - Frac/Acid-200083 (Zanesville, OH, US, 43701)

Job Duties and Qualifications

Depending on the job location, lodging, and rotating schedule may be provided.

Under supervision, delivers Product Service Line (PSL) equipment to wellsite
Provides proppant handling services, manifolding rig-up and tanks measurement during the job
Learns basic operations to include but not limited to:

Performing pre/post job equipment inspections
Performing and completing preventative maintenance procedures
Operating support equipment (i.e., proppant handling, Fluid Tanks, suction manifolding, treating lines, etc.)
Learn and adheres to Health, Safety, and Environmental (HSE) procedures and guidelines, and other appropriate safety and service quality protocols and guidelines
Assists in assembly and preparation of equipment for installation and service

Assists in the clean-up, repair, and preparation for the next job
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations
Promotes and takes an active part in quality improvement processes
Completes training as required following the Company's learning development system and processes

Requirements:

Must have High school diploma or equivalent education
Must have 3-6 months experience as Operator Assistant I – Frac/Acid or 1 year of related work experience in oilfield services
Must be able to obtain Class A CDL licensure
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Completion of Operator Assistant I – Frac/Acid competencies, or similar level of competence from previous industry experience
Able to lift 60 lbs.
Able to communicate effectively with others
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to perform basic mathematical calculations

Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200083
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus maybe availlable subject to certain conditions and approvals by area leadership.

K942-ESG-Tech Prof-Cementing (Villavicencio, MET, CO)

Job Duties

Under general supervision, Uses cementing knowledge and experience to develop the cementing job design to meet customer requirements, including preliminary job calculations, running computer simulations, designing fluid systems, submitting lab test requests and reviewing and approving test results, performing risk assessments, verifying the design meets regulatory requirements, and providing cost estimates for the planned operation. Provides operational expertise including operational instructions and identifying the resources required to perform the job. Independently performs post job analysis, provides recommendations for improvement, implements agreed improvements for subsequent jobs, shares learning with the Cementing Team and advertises successes by writing, publishing and presenting case histories and industry papers (for example SPE). Develops and maintains personal relationships with the technical customer base in designated area to effectively sell tailored cement solutions. Collaborating with customer office based drilling and / or production engineers, uses cementing knowledge to tailor solutions to meet their requirements and Halliburton&aposs commercial expectations, considering both the price of the solution to the customer as well as the total cost to Halliburton to deliver it. Sells new technology and processes identified in the location&aposs customer specific performance optimization plans (POP). Provides technical support at the well site as required by the customer or PSL. This involves verifying the job design using the final job input parameters and the engineering tools originally used to design the job. Consults with the PSL Team regarding equipment needs and specifications and verifies all resources required for the cementing operation are available and meet local regulatory requirements. Provides chemical and casing equipment forecasts in sufficient time for deliveries to meet forecasted job dates while helping to maintain inventory targets (inventory levels, turn rates, slow moving, excess etc). Performs assignments requiring knowledge and application of basic engineering and commercial principles. Mentors junior members of the Cementing Team. Works independently and may provide work direction to others at site. Completion of an undergraduate degree in a Science, Technology, Engineering or Math discipline required. Requires a minimum of 12 months experience learning cementing operations, job design and technical solutions.

Qualifications

Profesional en ingeniería de petróleos, química o afines.
Experiencia mínima de 3 a 4 años en operaciones de cementación en campo, liderando la planeación, alistamiento y ejecución de las operaciones, apoyo y manejo de informes.
Ingles avanzado
Experiencia laboral en el Sector Energético

Location

Cra. 21 No.8B-36, Villavicencio, , , Colombia

Job Details

Requisition Number: 200682
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Truck Driver - Production Enhancement (Clairmont, AB, CA, T0H 0W0)

Job Description

Responsibilities:

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman
Reads and interprets instructions and documentation and plans work activities
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another
Loads and unloads vehicles
Observes and follows all safety rules and procedures, including wearing required personal safety equipment, and assists during the operation of well logging equipment at job site
Performs other duties and activities as directed

Requirements:

High school diploma or equivalent
Must have Class 1 license with no restrictions
Must have a satisfactory driver record with no DWI/DUI convictions in the past three years or any current DWI/DUI charges
Winter driving experience
Able to communicate effectively with others
Basic reading comprehension and writing skills required
Able to pass background, physical and drug screen
Able to lift up to 60lbs
Able to pass background, physical and drug screen
Able to understand and carry out routine oral and written instructions
Able to accommodate a flexible work schedule, long work days, and/or irregular work hours, be on-call with short notice and exposed to extreme weather conditions
Maintains effective working relationship with other employees

Location

10202 70 Avenue, Clairmont, Alberta, T0H 0W0, Canada

Job Details

Requisition Number: 200715
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

IT Desktop Technician (Paramaribo, PM, SR)

Job Duties

Under strict supervision, assists in configuration, installation and repairing PC hardware and peripherals according to established procedures. Contacts end users to define data migration requirements and perform the data migration, if required. Performs user relocations and returns equipment to stock per approved request. Adheres to and enforces facility security measures, company safety standards and software licensing procedures. Assists in setting up PC's and related peripherals for special requests. Performs own work and provides assistance to others as directed. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Error is readily ascertainable by the supervisor and can be corrected. A+ certification or equivalent is desired.

Qualifications

Associate or Bachelors' degree in Computer Science, Software Engineering, or similar
1+ years' experience in a PC related field which includes experience in basic hardware configuration, installation and repairing PC hardware and peripherals
Advanced English level and residence in Suriname are mandatory
Have a “can do” attitude as well as energy and passion for learning.

Location

Anton Dragtenweg 266, Apt 1, Paramaribo, , , Suriname

Job Details

Requisition Number: 200777
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Information Technology
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Reforma/Chiapas Engineer-Frac/Acid, Sr (Reforma, CHP, MX, 29500)

Job Duties

Under general supervision, works with customers to develop technical solutions for subsurface problems during job planning and execution. Presents solutions to stakeholders based on subsurface knowledge. Ability to utilize stimulation design software to develop and provide assistance for fracturing treatment designs in a given area. Aids in job execution by providing on location technical support. Works on value add projects for both internal and external customers based on technical knowledge and developments. Projects may incorporate multi PSLs. Works alongside technology and operations team to aid in technology roll outs and development. Provides assistance to Business Development team to address technical needs of customers. Works with Supply Chain to guide inventory decisions with a focus on cost and DOI efficiencies. Must be able to work independently. Assists with management and development of Associate Technical Professionals and Tech Professionals. Skills typically developed as a Technical Professional and completion of courses focused on reservoir and formation evaluation, well completion strategies, and well performance analysis. This is a field based role with exposure to Business Development and additional roles in PE Operations. Knowledge in multi PSL operations preferred. Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline and at least 5 years of PE operations / engineering experience are required.

Qualifications

Requirements

Engineer with 5 years of experience in acid and non-acid stimulations, acid fractures and propped fractures.
Knowledge of design Fracture operations.
Knowledge of equipment to perform operations.
Strong follow-up and process tracking skills.
Experience in external customer management.
Advanced level of English.

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 198903
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Reforma / Chiapas - Supervisor de Fracturas y Estimulaciones II (Reforma, CHP, MX, 29500)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite. Plans and performs necessary calculations for the total job at the wellsite as needed. Coordinates and directs the activities of operators during the equipment rig up, rig down, and the preparation of equipment for performing a job. Provides planning necessary for the job including instructions to the crew and dispute resolutions to approved levels. Ensures customer satisfaction with jobs performed. May perform data collection and data distribution on jobs. Coordinates the clean up, repair, and preparation of equipment for the next job. Provides input on individual performance levels of subordinates, providing on-the-job skills development to enhance job performance. Performs Service Leader job duties when the Service Leader is not present. Must possess exceptional skills within the service line and have a general understanding of other service functions. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Leads pre- and post-job safety meetings in order to promote safety awareness and environmental consciousness. Ensures compliance with HSE standards, practices and guidelines. Must possess excellent knowledge of HMS standards, work methods and processes. Promotes and takes an active part in quality and continuous improvement processes. Skills are acquired through five and seven years of experience and completion of required competencies for current and next level. A university technical (TSU) or technical degree is required.

Qualifications

Requisitos

Técnico / Técnico Superior Universitario (TSU) en áreas relacionadas a la industria Oil&Gas.
Experiencia comprobable de 5 a 7 años en la planeación, ejecución y completación de trabajos de estimulaciones ácidas y no ácidas.
Amplio conocimiento en la operación y mantenimiento de equipos de bombeo de alta presión y unidades de mezcla.
Habilidades de liderazgo para la gestión de personal en campo.
Alta disponibilidad de horario para atender las necesidades operativas en la región sur de Mexico (Tabasco y Chiapas).

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 198947
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Reforma / Chiapas - Supervisor de Fracturas y Estimulaciones I (Reforma, CHP, MX, 29500)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite. Plans and performs necessary calculations for fluids management at the well site as needed. Coordinates the activities of and provides guidance to operators during equipment rig up, rig down, and the preparation of equipment for performing a job. Ensures customer satisfaction with work performed. Responsible for the management of the chemical inventory at the wellsite. May perform data collection and data distribution on jobs. Responsible for conducting operations in accordance with fluid design parameters and the job plan. Coordinates the clean up, repair, and preparation of equipment for the next job. Utilizes competency processes to enhance employee skills development and job performance. Job tasks, correctly performed, impact directly on cost containment, efficiency and profitability of operations. Must possess exceptional skills within the service line and have a general understanding of other service functions. Must be knowledgeable of HMS, HSE standards, work methods and guidelines. Leads pre- and post-job safety meetings in order to promote safety awareness and environmental consciousness. Promotes and takes an active part in quality and continuous improvement processes. Skills are acquired through three to five years of experience and completion of required competencies for current and next level. A Technical or university technician (TSU) degree is required.

Qualifications

Requisitos:

Técnico / Técnico Superior Universitario TSU en áreas relacionadas a la industria Oil&Gas
Experiencia comprobable de 3 a 5 años en la planeación, ejecución y completación de trabajos de estimulaciones ácidas y no ácidas.
Amplio conocimiento en la operación y mantenimiento de equipos de bombeo de alta presión y unidades de mezcla.
Fuerte apego a la ejecución conforme a procesos operativos y de seguridad.
Habilidades de liderazgo para la gestión de personal en campo.
Alta disponibilidad de horario para atender las necesidades operativas en la region sur de Mexico (Tabasco y Chiapas).

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 198948
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electrical Assembler (Associate - Senior) (Duncan, OK, US, 73533)

Job Duties

Working under general supervision, assembles instrument components and sub-components, electro-mechanical and hydraulic well logging assemblies and sub-assemblies, or electronic hybrid circuits.
May read and interpret detailed schematics, engineering drawings, wiring schematics, etc.
Duties may include utilizing high or low temperature soldering processes, fitting/mounting, alignment, adjusting, and operational testing.

Qualifications

High school diploma or equivalent is required.
Skills typically acquired through 3 years of related assembly experience.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Electrical Assembler, Electrical Assembler, or Senior Electrical Assembler.

Location

100 E Halliburton, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 200762
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

AR-Neuquen-A427-ESG-Intern-199632 (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199632
Experience Level: Entry-Level
Job Family: Support Services
PSL: [[division]]
Full Time / Part Time: Full Time

A427-ESG-Intern (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199648
Experience Level: Internship
Job Family: Support Services
PSL: [[division]]
Full Time / Part Time: Full Time

Production Welder (Associate - Senior) (Duncan, OK, US, 73533)

Job Duties

Under direct supervision with an assigned mentor or coach, performs standard operations specifically used in the welding process.
This may include MIG(GMAW), TIG(GTAW), Submerged Arc(SAW), Flux Core(FCAW), and Stick(SMAW welding. (DMMC Only)
Uses specified welding equipment to assist and support manufacturing operations of parts and assemblies as required to meet regulatory requirements.
Operates in a stringent quality-oriented environment.
Ensures that equipment is maintained timely and correctly, this includes the use of lifting devices, overhead cranes and material handling equipment.
Candidates are expected to have good written and verbal communication skills, as well as be competent in the use of computers.
Read blueprints, and drawing as well as be knowledgeable in the use of precision measuring instruments.
Tasks include performing manufacturing math calculations and use of specialized lifting equipment.
Performs own work, provides assistance to others as directed, and performs post-work inspection of work.
Safety procedures must be followed diligently at all times i.e.
Perform welding assembly process in accordance with Health, Safety and Environmental standards and policies.
Candidates will be required to pass a welding test on each type of welding for certification.

Qualifications

Skills typically acquired through the completion of High School/GED/Secondary School and a minimum of 6 months of experience.
1-2 years of related experience and certification in welding or equivalent is preferred.
Completion of MIG(GMAW and Flux Core(FCAW) welding tests during the interview process is required.

Work Schedule

The standard work schedule for this position is Monday through Thursday, from 6:00 AM to 4:30 PM. Due to operational demands, there is a high likelihood of overtime on Fridays and Saturdays. Candidates should be prepared to work extended hours as needed to support production goals.

World Class Benefits

State of the art facility featuring a climate-controlled work area, private gym and gated parking lot with onsite security
Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Production Welder, Production Welder or Senior Production Welder.

Location

100 E Halliburton, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 198851
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Data Engineering Project Lead (Houston, TX, US, 77032)

About the Role: We are seeking a Data Engineering Lead to oversee a product-aligned “pod” of 3–4 data engineers. This role combines technical expertise with leadership, cross-functional collaboration, and product-aligned thinking. You’ll work closely with Product Managers to understand business priorities and translate them into robust, scalable, and insightful data products.

Key Responsibilities

Technical Execution
- Leverage Databricks for scalable data processing and advanced analytics
- Design, build, and optimize modern ETL pipelines using Azure cloud technologies
- Implement data ingestion, curation, cataloging, and transformation workflows using PySpark, Python, and SQL
- Conduct exploratory data analysis and create compelling visualizations to draw insights and support decision-making
Team Leadership & Delivery
- Lead a team of 3–4 data engineers focused on delivering data products aligned to a specific Product Service Line (PSL)
- Own project planning, task assignment, and ensure timely delivery of high-quality data assets
- Mentor engineers, conduct code reviews, and help grow their technical and professional skills
Product Collaboration
- Partner with Product Managers to understand business goals, define data requirements, and prioritize work
- Advocate for data-driven decision-making within the product team
Data Product Ownership
- Ensure the quality, discoverability, and reusability of datasets across the organization
- Build and maintain Power BI dashboards and reports for both internal and external stakeholders
Innovation & Strategy
- Stay up to date with emerging cloud data technologies and recommend improvements to the current data stack
- Influence architectural decisions and contribute to long-term data platform strategy

Nice to Have

Experience in a product-led organization or working directly with product development teams
Familiarity with data science workflows, including statistical modeling, machine learning, or experimentation
Background in analytics, applied statistics, or scientific computing
Exposure to MLOps tools or hybrid data engineering/data science pipelines
Experience with infrastructure-as-code, CI/CD for data workflows, or containerization (e.g., Docker)

Preferred Qualifications

5+ years of experience in data engineering or a similar role, with at least 1–2 years in a leadership or mentorship capacity
Proficiency in Python and PySpark for data engineering, analytics, and scientific computation
Hands-on experience with Azure Data Services (Data Factory, Synapse, etc.) and Databricks
Familiarity with data governance, cataloging, and schema management
Strong experience with Power BI or other BI tools for dashboard development and report modification
Excellent communication skills and a track record of successful collaboration with product managers or other non-technical stakeholders

Required Qualifications

Completion of an undergraduate degree in STEM and 6+ years of related experience is required. Master's degree or Ph.D in STEM is preferred
Candidates having qualifications that exceed the minimum job requirement will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available from the Principal Software Developer, Advisor Software Developer up to the Senior Advisor Software Developer

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199356
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Global R&D
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

NC Programmer (Associate - Senior) (Duncan, OK, US, 73533)

Job Duties

Under close supervision, this position is responsible for acquiring expertise in creating quality NC part programs used on numerically controlled production machines.
Work is checked during progress and is reviewed for accuracy upon completion. Reviews tool selection and machining methods with PGL or more experienced programmer prior to creating a part program, assures departmental procedures are followed, creates NC part programs and submits for final approval, and assembles programs using existing modules.
Updates existing tapes per engineering change request or manufacturing needs and reviews plots and output listings of programs with experienced programmers prior to tape release.

Qualifications

High school diploma or equivalent is required.
Skills typically acquired through 4-5 years working in a lathe and/or milling machine capacity.
Technical Skills: Experience with NC Programming Software, CAD/CAM Software, blueprint interpretation is preferred.
Computer Skills: Knowledge with SAP and Microsoft office applications (Outlook and Teams).
Soft Skills: Attentive to detail, time management, problem-solving and written and verbal communication.

Work Shift

Monday - Thursday; 6:00am - 4:30pm

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate NC Programmer, NC Programmer, or Senior NC Programmer.

Location

100 E Halliburton, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 200651
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Production Welder (Associate - Senior) (Duncan, OK, US, 73533)

Job Duties

Under direct supervision with an assigned mentor or coach, performs standard operations specifically used in the welding process.
This may include MIG(GMAW), TIG(GTAW), Submerged Arc(SAW), Flux Core(FCAW), and Stick(SMAW welding. (DMMC Only)
Uses specified welding equipment to assist and support manufacturing operations of parts and assemblies as required to meet regulatory requirements.
Operates in a stringent quality-oriented environment.
Ensures that equipment is maintained timely and correctly, this includes the use of lifting devices, overhead cranes and material handling equipment.
Candidates are expected to have good written and verbal communication skills, as well as be competent in the use of computers.
Read blueprints, and drawing as well as be knowledgeable in the use of precision measuring instruments.
Tasks include performing manufacturing math calculations and use of specialized lifting equipment.
Performs own work, provides assistance to others as directed, and performs post-work inspection of work.
Safety procedures must be followed diligently at all times i.e.
Perform welding assembly process in accordance with Health, Safety and Environmental standards and policies.
Candidates will be required to pass a welding test on each type of welding for certification.

Qualifications

Skills typically acquired through the completion of High School/GED/Secondary School and a minimum of 6 months of experience.
1-2 years of related experience and certification in welding or equivalent is preferred.
Completion of MIG(GMAW and Flux Core(FCAW) welding tests during the interview process is required.

Work Schedule

World Class Benefits

State of the art facility featuring a climate-controlled work area, private gym and gated parking lot with onsite security
Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Production Welder, Production Welder or Senior Production Welder.

Location

100 E Halliburton, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 198855
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A453-ESG-Coord, HSE, Assoc (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 200991
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional III - Drilling Engineering Solutions (Nisku, AB, CA, T9E 7R6)

Job Description

Responsibilities:
• Under broad direction, provides support to office and field operations related to well planning and BHA design and operation.
• Assists in publishing commercial and technical successes.
• Delivers the develop solutions requirements for designing the well plan, following anti-collision processes, BHA Design modeling requirements, and generating design of service documentation.
• Generates reports using the current software applications.
• Fully understands the principles of survey management and is able to apply them to well planning.
• Develops and maintains personal relationships with the technical customer base.
• Consults with customers to determine their specific needs.
• Maintains the well planning and BHA design databases, and may be involved in the preparation of post job analysis for customers.
• Performs post-job reviews, participates in product/service failure investigations and reports findings to the customer.
• Supervises and peer-reviews work, and mentors less experienced team members.
• Offers advice on equipment capabilities and advises customers and field personnel on technical complexity and operation.

Requirements:
• Requirements include an undergraduate degree in a STEM discipline, preferably in Engineering.
• Incumbents have a minimum of 4 years’ relevant industry experience including working at the well site.
• Must have a current and valid drivers license and clean motor vehicle record.

Additional Skills:
• Proven track record in identifying new opportunities, driving growth strategies, and fostering client relationships.
• Solid technical understanding and hands-on experience with MWD tools, data interpretation, and optimizing drilling operations.
• Strong background in providing technical support and guidance, ensuring seamless execution of field operations.
• Deep knowledge of survey data acquisition, quality control, and directional drilling survey best practices.

Location

1400 5th Street, Nisku, Alberta, T9E 7R6, Canada

Job Details

Requisition Number: 200272
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer, Associate (Singapore, 05, SG, 637131)

Job Duties

Job Description:

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development.
Assists in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews.
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information.
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.

Requirement:

Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 201016
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Cloud Architect (Houston, TX, US, 77032)

Job Duties

The successful candidate will be well versed with both Microsoft Azure and AWS. You will collaborate with other teams within IT to deliver cloud solutions in accordance with Halliburton standards.

Responsibilities:

Azure:

Azure Network infrastructure design and deployment
Familiarity with the Microsoft Cloud Adoption framework
Azure Policy design / deployment and maintenance
Azure IAM role development and deployment
Design / Deploy Azure Management Groups

AWS:

IAM integration with Azure AD
AWS Control Tower
AWS CodePipeline
AWS Cloudformation
AWS Organizations

Common to both platforms:

Azure DevOps (ADO) deployments
Azure CLI
Powershell
ADO repositories using tools such GIT to maintain code
Terraform (AWS and Azure)
BiCep (Azure)

Qualifications

Position may require availability outside of normal working hours and beyond a normal work week of 40 hours.
Skills typically acquired through the completion of 10+ years of experience in IT with knowledge in a minimum of two IT disciplines and an undergraduate degree in Computer Science or a similar discipline.
Must be willing to work on site M-F.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200492
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Information Technology
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor (I-III) Coiled Tubing (Fort Lupton, CO, US, 80621-8345)

***$2,000 Sign-On Bonus Available***

Compensation Information

Compensation is competitive and commensurate with experience

Service Supervisor I: $23.00 - $37.78/hour
Service Supervisor II: $24.50 - $43.65/hour
Service Supervisor III: $26.00 - $50.53/hour
Position is eligible for a $300/month stipend based out of Fort Lupton, CO
$45/day Per Diem
2 weeks on 1 week off schedule *Halliburton reserves the right to adjust schedules based on industry needs*
Hotel accommodations for 60 days for employees relocating to the Fort Lupton, CO area.

Job Description

Job Duties

Under general supervision, promotes excellent customer relations at the worksite.
Plans and performs necessary calculations for the job at the well site as needed.
May coordinate the activities of service operators during equipment rig up and rig down on a location and the preparation of equipment for performing a job.
Ensures customer satisfaction with work performed.
Responsible for the management of the materials inventory when acting as Halliburton's sole service provider at the well site.
As needed, may perform data collection and data distribution on jobs. Utilizes competency processes to enhance own skills development and job performance.
Has a responsibility to ensure field paperwork is correctly completed.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency and profitability of operations.
Must possess excellent skills within the service line and have a general understanding of other service functions.
Must be knowledgeable of HMS, HSE standards, work methods and guidelines for CT personnel.
Promotes safety awareness and environmental consciousness. Promotes and takes an active part in quality improvement processes.

Qualifications

Completion of high school diploma or equivalent required.
Minimum of 2 years of experience within Coiled Tubing (CT) Services which includes specific experience in CT tools and on job applications is required.
Skills are typically acquired through completion of HAL Career Development (Competency) requirements for job role.
Must have a Class A CDL.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Service Supervisor I, Service Supervisor II or Service Supervisor III.

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

13100 County Road 8, Fort Lupton, Colorado, 80621-8345, United States

Job Details

Requisition Number: 198420
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Job Posting End Date: 5/7/2025, 5/31/2025

Compensation Information

Compensation is competitive and commensurate with experience.
Sign-on bonus is subject to certain conditions and approvals by area leadership.

Payroll Representative (Bengaluru, KA, IN, 560103)

Job Duties

Under direct supervision, functions as a member of a Payroll Unit, whose primary responsibility is the processing of employee payrolls, which includes HR and Payroll data gathering, processing, accounting, internal reporting, audit, and external reporting and remittance of all applicable wages and taxes. Demonstrates a general understanding payroll tax laws. Provides support for projects of medium complexity and required to produce proper supporting documentation related to applicable payroll reports, audits, accounting, and tax filings. Assists with the preparation of required documentation in support of internal controls as directed by the process guidelines. Assists with analysis, reconciliation, and ultimate resolution of a variety of payroll issues. Actively seeks support and guidance from subject matter experts on complex queries and issues to provide resolution. Takes an active part in continuous improvement process. A high school diploma or equivalent and at least 1 year of related experience required. A Bachelors Degree is preferred.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 200701
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Accountant (Spring, TX, US, 77386)

Job Duties

Under general supervision, applies knowledge of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input. Prepares and posts journal vouchers for complex accounting transactions.
Reviews and monitors financial transactions for accuracy and timeliness.
Researches and resolves complex accounting issues and transactions including related internal controls.
Prepares, analyzes, and distributes financial results including variance explanations.
Participates in multi-functional teams and develops project management skills.
Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen.
Perform costing of products and lead manufacturing plant finance with close collaboration with manufacturing operations.

Qualifications

Minimum of three (3) years of experience in accounting related roles required.
Requires completion of an undergraduate degree in accounting, business, or related field.
Knowledge of US GAAP or country-specific accounting principles required.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

445 Woodline Drive, Spring, Texas, 77386, United States

Job Details

Requisition Number: 200990
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Coordinator - Testing and Subsea (Odessa, TX, US, 79763)

Job Duties

Responsibilities:
• Under broad direction, uses operational business knowledge to make tactical/operational decisions and coordinate the movement of equipment, materials, and personnel within a Natural Work Area (NWA) in day to day operations.
• Coordinates the day-to-day activities of individuals performing job/resource planning roles.
• Validates job proposals and reviews requirements versus available resources.
• Assesses service delivery requirements for each job within assigned NWA.
• Coordinates the engagement and use of third party services and equipment within assigned NWA's.
• Utilizes technical and/or operational expertise to provide service delivery solutions for customers.
• Orders equipment specific to customer specifications/job requirements. Communicates job specific details and information to appropriate service delivery and support staff.
• Creates Sales Orders pursuant to contracts and pricing agreements for both scheduled and call out jobs.
• Communicates effectively with customers and service delivery staff to resolve service delivery issues and irregularities.
• Interfaces and works effectively with field operations pursuant to service quality, employee development, worksite safety, and process improvement processes and issues.
• Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
• Job role contributes directly to value creation.
• Conduct field visits to support rig ups, rig downs, rig surveys, equipment troubleshooting, and respond to customer callouts as required.

Requirements:
• Requires a high school diploma and a minimum of 5 years of experience in Halliburton field operations.
• Hands-on experience with Managed Pressure Drilling (MPD) operations, Rotating Control Devices (RCD), or ideally both.

Qualifications

Location

6155 W Murphy, Odessa, Texas, 79763, United States

Job Details

Requisition Number: 200761
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Coord, HSE (Paramaribo, PM, SR)

Job Duties

Qualifications

Location

Anton Dragtenweg 266, Apt 1, Paramaribo, , , Suriname

Job Details

Requisition Number: 200943
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: HSE
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Completion Tools Tool Technician I-II (200649) (New Iberia, LA, US, 70560)

Job Duties

Under strict supervision, performs maintenance functions such as repairs on down-hole tools, surface equipment and other production equipment in the application for down-hole tools.
Assembles and disassemble down-hole tools, surface equipment, and other production equipment. Basic computer skills are preferred.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.

Qualifications

Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the tool tech family.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

3504 West Admiral Doyle Drive, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 200649
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Stockpoint Truck Driver - Senior Truck Driver (200248) (Montgomery, PA, US, 17752)

Job Duties

Under general supervision, operates company vehicles for the purpose of ensuring the delivery of quality customer service, world-class safety, and business segment efficiency.
Reads and interprets instructions and documentation and plans work activities.
Operates company vehicles to move materials, tools, and equipment to and from work locations in support of internal and external customers.
Loads and unloads vehicles.
Observes and follows all safety rules and procedures, including wearing PPE.
Performs other duties and activities as directed.

Qualifications

Requires Class A CDL.
Skills are typically acquired through on the job training and appropriate driver training.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

343 Riddell Road, Montgomery, Pennsylvania, 17752, United States

Job Details

Requisition Number: 200248
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP01-ESG-Operator Asst I-L&P (Barrancabermeja, SAN, CO)

Job Duties

Qualifications

Location

km 11 via al centro complejo i, Barrancabermeja, Santiago, , Colombia

Job Details

Requisition Number: 199984
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Trust Accounting & Investments Analyst (Principal - Supervisor) (Houston, TX, US, 77032)

Under general supervision, support and execute detailed and varied tasks related to finance and accounting business processes, including general investment analysis, that are critical to the Trust Investments function

Responsibilities may include:

Maintaining master trust financial statements
Assisting with various regulatory reporting requirements, including monthly, quarterly, semi-annual, and annual deliverables
Reviewing and monitoring investment manager performance; periodic virtual or in-person meetings
Supporting the Investment Committee and attending quarterly Investment Committee meetings, with exposure to upper management
Participating in the selection of new investment managers, as needed
Coordinating with professional investment management firms, custodian banks, consultants, auditors, and other service providers
Self-starting and leading departmental projects

Trust Investments acts in a fiduciary capacity for the various retirement and benefit plans it supports. Therefore, the candidate should be others-focused, work with a high degree of accuracy, and have excellent communication skills

The ideal candidate would have strong accounting skills and experience, and a working knowledge of investment concepts

Completion of a university degree in finance or accounting and four (4) years of relevant experience. Candidates having qualification that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience and skill level, a variety of job opportunities might be available

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199918
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tax Supervisor (Houston, TX, US, 77032)

Job Duties and Qualifications

Under the supervision of the Federal Income Tax Manager
Work with the co-sourced service provider to ensure accurate and timely corporate and partnership income tax returns filing
Analyze, prepare, and review book-to-federal income tax adjustments
Responsible for preparing and reviewing tax basis balance sheets, return to accruals, and book-to-tax reconciliations
Supports the accounting for income tax process by preparing and reviewing activities associated with the annual consolidated income tax provision processes (ASC 740 and FIN 48), ensuring proper workflow and due dates are met
Work with tax depreciation system or external service provider to calculate tax depreciation and other property-related tax adjustments
Prepare and review federal extensions and quarterly estimated tax payments, including making payments via EFTPS to the IRS
Assist with federal tax audits and resolution of IRS notices
Assist with implementing and maintaining internal controls, company business policies, and practices related to areas of tax oversight
Develop responses to inquiries by internal and external auditors that pertain to matters within the area of responsibility
Research, interpret, and follow US federal income tax laws and ASC 740 rules and regulations in preparing tax provisions and disclosures. Stay abreast of changes in US federal income tax and ASC 740 rules and regulations and ensure that changes are reflected in the financial statements in a timely manner
Partner with and collaborate with the Tax Planning team to develop and execute tax strategies that reduce the company's overall tax costs/burdens
Collaborate with Finance and Accounting, Treasury, Legal, Tax Planning, Tax Compliance, and Transfer Pricing on tax and accounting issues to ensure that matters impacting the financial statements are timely and accurately reported in the Company’s financials and tax returns
Identify and implement opportunities for process improvement in the tax compliance and tax provision process, especially concerning technology utilization
Special projects and initiatives

Requirements

Must have a minimum of seven years of experience in corporate income tax in a public accounting or multinational corporate environment
Requires an undergraduate degree in accounting
A master’s degree in taxation or accounting and/or a CPA designation are a plus
Solid knowledge of federal and state income tax laws
Good understanding of Tax Accounting
Attention to detail and good organization skills, ability to multi-task and prioritize in a fast-paced environment
Working knowledge of Corptax, OneSource, and tax research tools
Working knowledge of SAP a plus
Proficient in using Excel (advanced functions like pivot tables, VLOOKUP, etc.) is required. Experience using Alteryx, tax engines, and data analysis software to streamline is a strong plus
Strong communication skills and ability to work in a team environment a must

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 194092
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant II-Frac Acid (Mumbai, MH, IN, 400093)

Job Duties and Qualifications

Under strict supervision, assists senior operators and/or performs frac-specific job roles (e.g., proppant, chemicals, blenders, QA/QC, etc... ). Learns basic operations to include but not limited to: performing pre/post job equipment inspections, performing and completing preventative maintenance procedures and operating support equipment (e.g., proppant handling, fluid tanks, suction manifolding, discharge manifold equipment, etc.). Completes requisite training and demonstrates competency as defined for current and next level. Assists in assembly and preparation of equipment for installation and service. Assists in the clean up, repair, and preparation for the next job. Exhibits safety awareness and environmental consciousness and complies with all applicable safety and environmental procedures and regulations. Participates in quality and continuous improvement processes. Reading comprehension and writing skills are required. Basic computer skills and the ability to perform basic mathematical calculations are preferred. Skills are acquired through on-the-job training and 3-6 months experience as an Operator Asst I. Requires completion of a high school diploma or equivalent.

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 196852
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator- Completions Tools (Mumbai, MH, IN, 400057)

Job Duties

Under direct supervision, assists the Service Specialist in installing well completion products. Assists with pre-job product and service equipment preparation (assembly, test, mobilization) and product installation at the well site. Assists with post-job mobilization, clean up and repair of service equipment and products. Completes all well site and post-job paperwork. Demonstrates knowledge of all third party well site activities that could impact the process of installing completions products. Demonstrate knowledge and skills related to HSE related activities - site assessments and risk analyses, onsite safety meetings, PPE use, documentation, etc. Given the nature of oil field service work, all employees must be able to execute written and verbal instructions and effectively exchange information with peers and superiors that will increase the likelihood of job success. Every employee must be able to work as an effective team member. The ability to perform basic mathematical calculations is required. Basic reading and writing skills are required. Basic computer skills are required. This is a development position with the expectation that all Service Operators will advance to the Service Specialist position. Develops all remaining skills required to be able to provide the least complex completion products and services at the customers' well sites without direct supervision. Develops and demonstrates a working knowledge of local completions HMS processes. Develops and demonstrates the ability to perform the pre-job review of the job design to understand the total job scope, the desired result and the processes and tools to achieve success.

Key Responsibilities/Accountabilities:

• Assist with post-job demobilization, clean up, and repair
• Develop and demonstrate the ability to perform the pre-job review of the job design to understand the total job scope, the desired result and the processes and tools to achieve success
• Demonstrate knowledge and skills related to HSE related activities – site assessments and risk analyses, onsite safety meetings, PPE use, documentation, etc.
• Assist with pre-job product and service equipment preparation and mobilization
• Develop all remaining skills required to be able to provide the least complex completion products and services at the customers’ well sites without direct supervision
• Demonstrates knowledge of all third party well site activities that could impact the process of installing completions products
• Completes all well site and post-job paperwork
• Assist with product installation at the well site
• Develops and demonstrates a working knowledge of local completions HMS processes
• Promotes safety awareness and environmental consciousness by conducting and documenting all HSE-related activities at the well site, and promotes and takes an active part in the quality improvement process
• Interacts with third parties whose activities could impact the process of installing completion products to ensure proper coordination.

Qualifications

Basic Qualifications: Graduation/ Diploma(minimum)

Total Years of Experience: 2 years

Desired/Preferred Expertise: Completions

Location: Barmer/Kakinada/Mumbai, India

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 198935
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logging Geologist-SDL, (I-Sr.)-199904 (Broussard, LA, US, 70518)

Job Duties

Requires completion of an undergraduate degree in Engineering, Science, Geoscience, Petroleum Engineering or a related field and no previous experience.
This is a developmental role to obtain the required competencies from the SDL, LWD and Directional Drilling Sub-PSL's to progress to a specialization in Optimization, Geosteering or Survey Management.

Qualifications

Location

4607 Hwy 90 E, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 199904
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LG906-ESG-Customer Operations Spec (Bogota, CUN, CO)

Job Duties

Under strict supervision, this role augments customer relationships and expedites revenue recognition by performing assigned tasks within one or more quote to cash (QTC) process domains to include a combination of pre-sales, product delivery and service delivery activities required to support an assigned geography, global account or customer segment. Job tasks, correctly performed, have minimal impact upon the viability of the organization. Errors are readily ascertained by the supervisor and can be corrected. Skills are typically acquired through 1 year experience in customer service, preferably within the high-tech sales or service industry. Halliburton experience in distribution or finance administration and familiarity of the sales administration and financial aspects of the business is favorable. Completion of an undergraduate degree in Business is preferred.

Qualifications

Location

Calle 113 #7-80, 3.Floor Torre, Bogota, , , Colombia

Job Details

Requisition Number: 199130
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Area Resource Specialist (Vung Tau, 43, VN)

Job Duties

Under general supervision, coordinates and tracks the movement of equipment, materials, and personnel within a Natural Work Area (NWA).
Works directly with field personnel to ensure proper resources are allocated to meet service delivery requirements.
Maintains scheduling board and report on utilization of personnel and equipment.
May serve as a backup to Area Resource Coordinator for sale order creation.
Troubleshoots and resolves SAP order to cash issues to include but not limited to timely reconciliation of Sales Orders.
Ensures crew travel requirements meet applicable Health, Safety and Enviornmental guidelines.
Promotes safety awareness and enviornmental consciousness and complies with HSE procedures and guidelines.
Skills are typically acquired through a High School Diploma or similar education and 2 years industry experience or within a PSL or field operations.
Promotes and actively participates in the quality improvement process.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 200215
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Payroll Representative (Bengaluru, MH, IN, 560103)

Job Duties

Under direct supervision, functions as a member of a Payroll Unit, whose primary responsibility is the processing of employee payrolls, which includes HR and Payroll data gathering, processing, accounting, internal reporting, audit, and external reporting and remittance of all applicable wages and taxes. Demonstrates a general understanding payroll tax laws. Provides support for projects of medium complexity and required to produce proper supporting documentation related to applicable payroll reports, audits, accounting, and tax filings. Assists with the preparation of required documentation in support of internal controls as directed by the process guidelines. Assists with analysis, reconciliation, and ultimate resolution of a variety of payroll issues. Actively seeks support and guidance from subject matter experts on complex queries and issues to provide resolution. Takes an active part in continuous improvement process. A high school diploma or equivalent and at least 1 year of related experience required. A Bachelors Degree is preferred.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 200191
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Truck Driver - Cementing (Bossier City, LA, US, 71111)

Job Duties

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman.
Reads and interprets instructions and documentation and plans work activities.
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another.
Loads and unloads vehicles.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Performs other duties and activities as directed.

Qualifications

High school diploma or equivalent required
Class A Commercial Driver's License (CDL) with Tanker Endorsement required
Must be able to operate manual transmission

World Class Benefits

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4720 Industrial Dr, Bossier City, Louisiana, 71111, United States

Job Details

Requisition Number: 198756
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

CL09-ESG-Svc Supv II-Slickline (Macae, RJ, BR, 27930-070)

Job Duties and Qualifications

Under general supervision, leads a crew in providing a wide range of slickline services in a geographic area. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction. Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose. Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job. Performs all aspects of the job in compliance with HMS processes. Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Performs onsite emergency unit/equipment maintenance as needed. Demonstrates knowledge of pre and post-job product and service activities (employee&aposs ongoing participation in these pre and post-job processes will vary by location). Properly maintains assigned equipment and ensures compliance with safety regulations and procedures. Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination. Trains service operators and operator assistants in areas of expertise. Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations. Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor. Promotes and takes an active part in the quality improvement process. Develops his/her knowledge and skills to be able to run the most complex, or complete range of, slickline services under the most challenging conditions. Develops mentoring and competency assessor skills.

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 196323
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Hydraulic Frac Engineer (OH, US, 43701)

Job Description:

Under general supervision, provides well support for operations on location.
Collaborates with other team members and the technology, maintenance, logistics, and business development groups on solving strategic, operational, and technical problems at an area-level.
Supports new job designs, new software, and new equipment to ensure customer satisfaction.
Develops and maintains a close working relationship with the Service Leader, crew, on-sight customer, and support functions.
Requires technical and operational competence in Production Enhancement and an understanding of other Product Service Lines (PSL) at the wellsite, as well as proficiency and knowledge of basic engineering principles, continuous improvement, and project management principles.
Works independently and on group projects across the Region and may provide work direction to others at site.
Helps develop new software, leads deployment of software and new equipment, provides updates and recommendations to ensure successful rollouts.
Ensures best practices are shared across the Region.
Functions as a communications link between other DevOps groups and/or PSL Technology and the onsite operations team.
Assists with development of Associate Technical Professionals.

Qualifications:

Requires a bachelor's degree in a STEM discipline, and a minimum of 2 years of experience in PE operations/engineering.
Requires travel throughout the area.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Additional Locations for this position: Odessa, TX and Williston, ND

Requisition Number: 197756
Experience Level: Experienced Hire
Job Family: Operations
PSL: Production Enhancement
Full Time / Part Time: Full Time

Senior Real Estate Project Coordinator - Lead Real Estate Project Coordinator (Broussard, LA, US, 70518)

Job Duties

Manage Real Estate related design and construction projects and apply project management professional principles, practices and techniques to ensure projects are delivered as per schedule, cost and scope in compliance to company policies and standards.
Real Estate projects include planning, design, procurement, construction, renovation, upgrade, commissioning and etc. of assets used by the company such as workshops, warehouses, offices, laboratories, storage areas, liquid mud plants, calibration facilities and etc.

Main responsibilities

Stakeholder engagement, communication and reporting.
Cost management, forecasting and reporting.
Resource coordination and contractor management.
Schedule development and monitoring (using MS Project).
Change Management and Project Controls skills.
Risks and Issues Management.
Following company Health and Safety practices.
Quality Management and Continuous Improvement.
Team engagement and support.

Qualifications

Bachelor’s degree in Project Management, Engineering, Architecture or Construction.
PM certification such and CAPM, Prince2, PMP will be an advantage. Evidence of continuous personal development.
Minimum of 3-5 years of project management / construction management experience.
Language proficiency: English.

Technical competency

Familiar with Oil & Gas service industry.
Practical application of Project Management skills.
Ability to bring structure to unstructured problems.
Strong organization skills and communication management.
Proficient with information technology (MS Project, Excel, Word, Power Point).
Familiarity with main HSE concepts and demonstratable experience and respect for Safety principles.
Demonstratable ability to work in diverse teams and being effective team player.
Working under pressure and maintaining accountability for projects assigned.
Ability to pivot priorities.

World Class Benefits

State of the art facility featuring a climate-controlled work area, private gym and gated parking lot with onsite security
Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Real Estate Project Coordinator or Lead Real Estate Project Coordinator.

Location

4607 Hwy 90 E, Broussard, Louisiana, 70518, United States

Job Details

Requisition Number: 198492
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Real Estate Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Real Estate Portfolio & Business Analyst (Mumbai, MH, IN, 400093)

Job Duties

Under broad direction, accurately abstracts Real Estate lease and purchase transactions (legal documents) into the SAP RE Module; including both RE & Financial information in accordance with GAAP & FASB/IASB for all Halliburton locations globally.
Advises and communicates business process knowledge of Commercial RE Processes, Policies & Business Practices, RE Accounting, and RE Systems Application support to end users.
Applies application of RE processes and system knowledge to resolve problems.
Applies application of RE processes and system knowledge to expedite resolution of escalated problems.
Participates in the design, development and documentation of RE business processes, system enhancements and training materials.
Liaisons between local RE and finance & accounting groups.
Demonstrates the capability to handle sensitive situations and is able to understand and effectively resolve issues in a collaborative manner.
Ensures RE transactions are recorded in accordance with RE and Finance company policies, business practices and processes.
Generates RE reporting to support Portfolio analysis and adherence to key performance indicators.
Performs Month End data validations, error correction, and communications to ensure RE accounting transactions are recorded properly and allocated to internal occupants (PSL's and support departments).
Performs system testing in relationship to new enhancements as well as mock simulations of unique RE transactions to ensure proper recording of RE financial postings.
Job role directly impacts a revenue center's viability or its quality of service via personal contribution.

Qualifications

Requires a High School Diploma
Minimum of 5 years of experience in real estate or accounting related activities
Experience in lease, purchase and sale transactions or facility management and/or customer support.

Location

Guru Hargovindji Marg, Mumbai, , 400093,

Job Details

Requisition Number: 200130
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Real Estate Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Catu (BA) & Mossoró (RN) - Banco de Talentos PcD (Jovem Aprendiz) (BA, BR)

REQUISITOS

Ensino Médio Completo;
Idade mínima de 18 anos;
Disponibilidade para dedicar-se ao programa por 4h/dia de segunda a sexta;
Residir próximo a Macaé e região ou Rio de Janeiro Capital;
Interesse em desenvolver atividades administrativas.

Localização

Catu, BA & Mossoró, RN

Número da Requisição

193345

HR Business Partner Manager (Stavanger, 18, NO, 4065)

Job Duties

Under broad direction, serves as a strategic HR business partner to the product service line (PSL), region or functional senior leadership by driving the development and execution of mid-size people solutions to positively impact business goals.
Executes on people processes and services pursuant to the PSL, region or functional business strategy.
Ensures the transfer of people management expertise to business leaders and drives experiential learning.
Consults with the Centers of Excellence (COEs) and business unit leaders on the efficient and effective delivery of HR products and services.
Provides oversight and support to address business needs through means such as development of leadership, workforce planning, succession planning, top talent management, technical training and competency development initiatives.
Drives organizational effectiveness (change management, team effectiveness, performance management, employee engagement, diversity & inclusion, etc.) by consulting with leaders to identify challenges and delivering solutions and/or engaging with other parties within HR to provide necessary expertise.
Oversees the implementation of new policies, plans and procedures in partnership with COE leads.
Direct management responsibilities may include managing, coaching and mentoring people, developing and executing processes, or both.

Qualifications

We offer

Innovative work-environment in a global company
Competitive salaries and pension schemes
Career opportunities both domestically and globally
Highly skilled colleagues in an international environment
Focus on technology and further development
Outstanding insurance coverage including private health coverage
Occupational health service
Excellent deals at one of the country's largest fitness centers
Discounts on recreational activities including yoga, swimming and golf
Beneficial employee stock-purchase plan

Location

P.O.Box 200, 4065 Stavanger, Stavanger, , 4065, Norway

Job Details

Requisition Number: 200131
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Human Resources
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

HR Service Center Representative (Pune, MH, IN, 411001)

Job Duties and Qualifications

Under general supervision, provides accurate and prompt responses to a wide range of Human Resources customer inquiries within an HR Service Center.

Utilizes knowledge base, documented procedures, policy manuals, HR databases, and other resources to resolve inquiries via telephone, voicemail, or e-mail. Escalates complex to difficult issues that require specific, in-depth knowledge to the appropriate resource.

Receives and processes requests for moderate to complex personnel actions in the Human Resources Information System (HRIS) and ensures data integrity is maintained.

Tracks all customer contacts and follows up to ensure satisfactory resolution.

Serves as a first-level contact for most Human Resources administration issues.

Helps other team members as required. Requires a high school diploma or equivalent, and five years of experience in Human Resources, including two years in a customer service environment.

Location

Sai Radhe Building 100, 101, Pune, Monaghan, 411001, India

Job Details

Requisition Number: 196511
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: GBS Admin
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Consultant- Landmark Software & Services (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience.
Working with customers, demonstrates knowledge of existing and emerging technology and product areas.
Communicates to individual clients how the use of technology solutions allow them to be more productive.
Is able to articulate and apply mainstay process for assignment delivery.
As an individual contributes to project teams. Effectively plans and manages own workload to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals.
Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 5 years of experience.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 200936
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Consultant- Landmark Software & Services (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience.
Working with customers, demonstrates knowledge of existing and emerging technology and product areas.
Communicates to individual clients how the use of technology solutions allow them to be more productive.
Is able to articulate and apply mainstay process for assignment delivery.
As an individual contributes to project teams. Effectively plans and manages own workload to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals.
Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 5 years of experience.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 201034
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Tax Advisor (Jompol, Chatuchak, Bangko, 10, TH, 10900)

Job Duties

Brief job description:

Support in all direct and indirect tax reporting and compliance covering income tax, tax estimate, transfer pricing, withholding tax & etc.
Prepare/analyze/review the financial data on a monthly basis and support in deferred tax & tax provision closing.
Review/supervise functions of more junior staff and provides insight with regard to optimization of internal controls
Evaluate reasonableness of assumptions made in tax calculations and determining relevant facts and arriving at conclusion supported by laws.
Assist with preparation of statutory reporting/returns, and support in audits/appeals which may include the preparation of responses to various taxing authority notices and dealing or meeting with the respective tax officer as and if required.
Advise and attend to queries from stakeholders/business partners where required.
Keep abreast of the latest tax updates/developments and analyze/advise the applicability and implications to business from time to time.
Other ad-hoc assignment /duties as and if required.

Requirements:

Good understanding of tax rules, regulations and practices.
Bachelor’s degree in Accounting or related certification/qualification preferred
Minimum 5 years’ experience in Tax & Accounting is preferable.
Experience from Big 4 and knowledge of SAP is preferable

Qualifications

Location

123 Vibhavadi-Rangsit Rd., Jompol, Chatuchak, Bangko, Bangkok, 10900, Thailand

Job Details

Requisition Number: 198178
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer, Associate (Singapore, 05, SG, 637131)

Job Duties

Job Description

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development.
Assists in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews.
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information.
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.

Requirement

Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 201037
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor I- Cementing (Aberdeen, ABE, GB, AB21 0GN)

Job Duties

JOB DESCRIPTION:

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.

Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.

Ensures customer satisfaction with work performed.

Coordinates and directs the activities of service operators.

Coordinates the clean up, repair, and preparation of equipment for the next job.

Plans and performs necessary calculations for the total job at the well site as needed.

Leads the site crew comprised of Halliburton and/or non-Halliburton employees.

Evaluates individual performance levels of the crew and trains operators to improve their job performance.

Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.

Skills are typically acquired through a high school diploma, or similar education and one year of experience as Service Operator-Cementing, II.

Licensure to drive commercial equipment may be required.

Given the nature of oil field service work, the ability to communicate effectively with others is necessary.

Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.

Promotes and takes an active part in the Quality Improvement Process.

Candidate must meet the minimum developmental standards for this job classification.

Has necessary working skills within the service line and a general understanding of other service functions.

Qualifications

Location

Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom

Job Details

Requisition Number: 200653
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logistics Specialist (Mumbai, MH, IN, 400059)

Job Duties

Under general supervision, plans and implements the complete logistics cycle.

Optimizes domestic and international movement to ensure goods are delivered to the freight forwarders so they can be onward shipped to final destination with all required documents.

Role requires the ability to understand and optimize all shipments that have constraints which may or may not be controllable, and are subject to but not limited to hazardous cargo.

Ensures that all engagement and practices for the movement of goods domestically and internationally are in compliance with local and international law.

Responsible for understanding and validating transactions in two of the three modes of transportation (Air, Ocean, or Land) and deciding with method is the most economical and reliable route to use due to cost and time constraints.

Collaborates with logistics service providers to find the appropriate and creative solution to ensure goods make the final destination in a timely manner, while maintaining a competitive edge.

Forecasts capacity with logistics service providers to support business needs by calculating a TCO (Total Cost of Ownership) and uses it as a tool to help derive economical routing.

Requires undergraduate degree or equivalent in Supply Chain, Logistics, Information Systems or Engineering and 2 to 3 years of experience in related field of logistics, with at least two transport modes (Ocean, Air or Land). Knowledge of Hazardous movements preferred. IATA/IMDG certification may be required based on scope of work.

Position Overview

We are seeking a highly skilled and experienced Logistics Specialist to join our team. The ideal candidate will have a strong background in import/export documentation, regulatory compliance, and coordination with various stakeholders to ensure the smooth movement of goods both domestically and internationally.

Key Responsibilities:

• Handle documentation for import, re-export, SEZ in & out, Essentiality Certificates (EC) for import and domestic, and domestic movement of materials.

• Manage block transfers for imports under ECs, cancellation of re-export bonds, and obtaining GR waivers from banks.

• Process and follow up on export, duty drawback claims with customs and banks.

• Facilitate correspondence and coordination between overseas buyers, manufacturing units in India, and ensure customs compliance.

• Coordinate with customs house agents, banks, DGH, transporters, shipping companies, company departments, bases, workshops, and accounts

• Ensure all contracts are in place for clearing agents and transporters.

• Verify and check clearing/transportation bills against contracts.

• Handle LC shipments and manage LC documentation.

• Manage compliance documentation related to import and re-export.

• Close IDPMS/EDPMS records with banks and maintain data for audit purposes.

• Stay updated on all regulatory laws related to import/export, including public notices applicable to the oil and gas industry.

• Ensure compliance with IATA, IMDG certifications, and FEMA guidelines.

• Ensure all practices for the movement of goods comply with local and international laws.

Years of Experience: 4 to 8 year with minimum of 2 years in Oil & Gas Industry

Work Location: Mumbai

Education Criteria(If any): Any Graduate

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400059, India

Job Details

Requisition Number: 200821
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Account Representative - Business Development (Macae, RJ, BR, 27930-070)

Job Duties

Realizar visitas a contas atribuídas e não atribuídas para promover de forma eficaz os produtos e serviços da empresa;
Alinhar as capacidades técnicas, comerciais e operacionais da empresa às necessidades dos clientes;
Gerenciar contratos dedicados de clientes e supervisionar políticas de preços e iniciativas de precificação para a base de clientes;
Atuar de forma estratégica em processos de licitação e outras oportunidades de negócio, além de gerar e enviar propostas comerciais;
Identificar oportunidades de atuação integrada com outros PSLs (Product Service Lines) e Unidades de Negócio;
Manter comunicação constante com os Líderes de Conta para identificar, acompanhar e fechar oportunidades de negócios.

Qualifications

Ensino superior completo em Administração, Marketing, Engenharia ou áreas correlatas;
Inglês avançado ou fluente;
Sólida experiência em gestão de contas e contratos com clientes;
Domínio de Excel (nível avançado);
Habilidade para realizar análises financeiras, modelagem econômica de projetos, P&L, entre outros;
Excelente comunicação, relacionamento interpessoal e habilidades de negociação;
Residir em Macaé e região;
Disponibilidade para viagens.

Diferenciais:

Conhecimento em Fluidos de Perfuração e Completação, Equipamentos de Controle de Sólidos e/ou Perfuração de Poços.

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 200465
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Repair and Maintenance Technician Logging While Drilling tools (Stavanger, 11, NO, 4065)

Due to increase in activity. We are looking to increase capacity in our Logging While Drilling Maintenance department. Our Next generation LWD tools are cutting edge technology and require complex repair, maintenance, calibration and qualification to provide the highest quality service to our customers. Technicians with an electro-mechanical background.

We are looking for the right people — people who want to innovate, achieve, grow, and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers.

Our values are the foundation for everything we do. If you can identify with our values: Safety, Trust, Collaboration, Integrity and Respect you can be the one we are looking for.

We offer
Great career and development opportunities
Highly skilled colleagues in a diverse environment
Company health insurance
Competitive pension- and insurance scheme
Beneficial employee stock-purchase plan
Social club with several arrangements throughout the year
Free parking and company bus arrangements

Qualifications:
Technical College
Trade Certificate of apprenticeship within (enter specific; e.g. well engineering, logistics, office and administration, industrial fitter etc.)

Personal qualifications:
We are looking for you who is focused on people – Safety first is our HSE vision.
We seek candidates with a strong focus on team work to reach our common goals.
The candidate must be able to work in a structured manner and handle a complex and sometimes hectic everyday life.
Due to occasionally tight deadlines, it is important that you are flexible and willing to adapt to deadlines and everyday challenges.
We are looking for you who have a positive service attitude and contribute to a good working environment.
We are looking for you who willingly share your experience and embrace new knowledge.

Language:
The candidate should have good communication and collaboration skills.

Location:

Eldfiskvegen 1, 4056 Tananger

Product Service Line:

Sperry Drilling

Contact person

Gary Phelan (Gary.Phelan@Halliburton.com)

Deadline:

3rd August 2025

Contract&Pricing Admin-OTC,Assc (Macae, RJ, BR, 27930-070)

Job Duties

Under direct supervision, provides contracts and pricing support within the SAP system, with specific emphasis on Contract Lifecycle Management (CLM) and Price Uploader; Reviews contracts for completeness and works closely with country resources to create/revise contracts as required; Compiles and analyzes data, enters contract information into the database and maintains historical information; Monitors notification alerts, collaborates with country resources regarding execution of contracts, expiration/updates of contracts, and adjustments for post- award changes; Assists with maintaining regional price books and databases within SAP; Entry level position; Completion of an undergraduate degree in General Commerce preferred; Experience working with contracts, proposals and tenders, and contract review or negotiations is preferred; Must be proficient in desktop productivity tools including, Outlook and Excel; Effective interpersonal, written, and oral communication skills required.

Qualifications

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 198819
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Other
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician (I-III) - Maintenance (Victoria, TX, US, 77905-5555)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications

A high school diploma or equivalent and one year of experience in a mechanical field is required.
Preferred Qualifications include an A.S. degree or Certificate in Diesel Technology with previous experience as a mechanic working with heavy duty equipment.
Basic set of hand tools is required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available Mechanic Technician I, Mechanic Technician II, Mechanic Technician III.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

101 Holt Rd, Victoria, Texas, 77905-5555, United States

Job Details

Requisition Number: 199317
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&M (Repair & Maintenance) Electrical Technician (Vung Tau, 43, VN)

Job Duties

Under strict supervision, performs repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS or M/LWD sensors.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of tools associated with PSL equipment, or Measure while drilling and/or Logging While Drilling down-hole tools.
Requires a technical school certificate, or equivalent.
An associate degree or higher is preferred.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 200189
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor-Frac Acid (Mumbai, MH, IN, 400093)

Job Duties and Qualifications

Under general supervision, promotes excellent customer relations at the worksite. Plans and performs necessary calculations for fluids management at the well site as needed. Coordinates the activities of and provides guidance to operators during equipment rig up, rig down, and the preparation of equipment for performing a job. Ensures customer satisfaction with work performed. Responsible for the management of the chemical inventory at the wellsite. May perform data collection and data distribution on jobs. Responsible for conducting operations in accordance with fluid design parameters and the job plan. Coordinates the clean up, repair, and preparation of equipment for the next job. Utilizes competency processes to enhance employee skills development and job performance. Job tasks, correctly performed, impact directly on cost containment, efficiency and profitability of operations. Must possess exceptional skills within the service line and have a general understanding of other service functions. Must be knowledgeable of HMS, HSE standards, work methods and guidelines. Leads pre- and post-job safety meetings in order to promote safety awareness and environmental consciousness. Promotes and takes an active part in quality and continuous improvement processes. Skills are acquired through two years of experience and completion of required competencies for current and next level. Requires completion of a high school diploma or equivalent.

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 196846
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Hydraulic Frac Engineer (TX, US, 79763)

Job Description:

Under general supervision, provides well support for operations on location.
Collaborates with other team members and the technology, maintenance, logistics, and business development groups on solving strategic, operational, and technical problems at an area-level.
Supports new job designs, new software, and new equipment to ensure customer satisfaction.
Develops and maintains a close working relationship with the Service Leader, crew, on-sight customer, and support functions.
Requires technical and operational competence in Production Enhancement and an understanding of other Product Service Lines (PSL) at the wellsite, as well as proficiency and knowledge of basic engineering principles, continuous improvement, and project management principles.
Works independently and on group projects across the Region and may provide work direction to others at site.
Helps develop new software, leads deployment of software and new equipment, provides updates and recommendations to ensure successful rollouts.
Ensures best practices are shared across the Region.
Functions as a communications link between other DevOps groups and/or PSL Technology and the onsite operations team.
Assists with development of Associate Technical Professionals.

Qualifications:

Requires a bachelor's degree in a STEM discipline, and a minimum of 2 years of experience in PE operations/engineering.
Requires travel throughout the area.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

6155 W Murphy, Odessa, Texas, 79763, United States

Job Details

Additional Locations for this position: Williston, ND and Zanesville, OH

Requisition Number: 197748
Experience Level: Experienced Hire
Job Family: Operations
PSL: Production Enhancement
Full Time / Part Time: Full Time

Hydraulic Frac Engineer (ND, US, 58801)

Job Description:

Under general supervision, provides well support for operations on location.
Collaborates with other team members and the technology, maintenance, logistics, and business development groups on solving strategic, operational, and technical problems at an area-level.
Supports new job designs, new software, and new equipment to ensure customer satisfaction.
Develops and maintains a close working relationship with the Service Leader, crew, on-sight customer, and support functions.
Requires technical and operational competence in Production Enhancement and an understanding of other Product Service Lines (PSL) at the wellsite, as well as proficiency and knowledge of basic engineering principles, continuous improvement, and project management principles.
Works independently and on group projects across the Region and may provide work direction to others at site.
Helps develop new software, leads deployment of software and new equipment, provides updates and recommendations to ensure successful rollouts.
Ensures best practices are shared across the Region.
Functions as a communications link between other DevOps groups and/or PSL Technology and the onsite operations team.
Assists with development of Associate Technical Professionals.

Qualifications:

Requires a bachelor's degree in a STEM discipline, and a minimum of 2 years of experience in PE operations/engineering.
Requires travel throughout the area.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

826 48th Ave West, Williston, North Dakota, 58801, United States

Job Details

Additional Locations for this position: Odessa, TX and Zanesville, OH

Requisition Number: 197752
Experience Level: Experienced Hire
Job Family: Operations
PSL: Production Enhancement
Full Time / Part Time: Full Time

DV03-ESG-Field Prof-DD, II (Neuquen, Q, AR, 8300)

Job Duties and Qualifications

Under general supervision, provides on-site supervision of the Directional Drilling (DD) process including projection of well path to predetermined target coordinates. Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping and handling.
Proficient in the use of DD computer software and able to assist in provision of advice and analysis to the client representative at the well site. This shall include all survey calculations and well path projections.
Proficient in updating well profile plots and providing client representative with accurate directional survey data. Aware of client's requirements with regards to surveying procedures. Assists in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and relevant paperwork (well data spreadsheet, lesson learned/best practice, End of Job Customer Survey (EJCS) and Key Performance Indicator (KPI) forms).

REQUIREMENTS:

Completion of an undergraduate degree in electronic, mechanical or related fields
Minimum of 3 years of experience in the Oil&Gas Industry, specifically with DD operations
Advanced English level
Flexibility and availability to meet client needs, in terms of time and mobility

Location

Cnl 5 y Rta 22, Col. Valentina, Neuquen, , 8300, Argentina

Job Details

Requisition Number: 197135
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Technical Professional-Completions Tools (Mumbai, MH, IN, 400057)

Job Duties

Under broad direction, provides Completion, Products & Services (CPS) job design, well support, and post job analysis to NWA/Country customers. Develops and maintains personal relationship with the technical customer base in designated area. Functions as a communications link between customer, Business Development, and Operations. Advise crews on location to ensure that each project conforms to Halliburton standards for both quality and safety. Works independently and may provide work direction to others at site. Interpret well site data in real time using complex technologies such as software simulators and the latest electrical and mechanical equipment, calculations, and modelling. Solve on the spot issues remotely and at the well site. Has developed technical competence in one PSL and a general understanding of other Product Service Lines (PSLs). Consults with PSLs regarding equipment needs and specifications. At this level, assignments are generally well defined with clear and specified objectives. Performs assignments requiring knowledge and application of basic engineering principles. Undergraduate degree required – acceptable degrees are: All engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry with 40 months industry experience.

Works alongside technology and operations team to aid in technology roll outs and development. Provides assistance to Business Development team to address technical needs of customers

Key Responsibilities/Accountabilities:

• Designing, execution and well planning for Completion Jobs for multiple projects.
• As a Completion engineer, lead on-site execution of above jobs in onshore and offshore fields.
• Prepare post-job reports and recommendations based on the analysis for future optimizations.
• Develops relationships with customers to meet requirements, manage expectations, recommend and carry out on the job changes from the wellsite.
• Collaborates with operations and Business Development teams to provide efficient execution of jobs.
• Work with service coordinators to verify equipment and material for pre-job preparation.
• Completes pre job fluid testing and analysis. Provides technical documentation during and at the end of the job to Business Development and customers. Validates end of job packet as per internal processes.
• Completes projects surrounding basic engineering principles, job design and execution. Understands and aids technology teams in the roll out of new technologies, both surface and subsurface.
• Understands PSL specific equipment, and equipment requirements based on job design.
• Assists with development of Associate Technical Professionals.
• Fosters teamwork among all personnel involved in the performance of the work.
• Ability to demonstrate technical aptitude to the standards required.
• Must possess good communication, and aptitude skills.
• Requires ability to read and interpret formation well logs, completion, and production reports.

Qualifications

Basic Qualifications: Engineering Graduate

Total Years of Experience: 4 years (Minimum)

Desired/Preferred Expertise: Completions

Location: Barmer/Kakinada/Mumbai, India

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 199034
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Truck Driver-Senior Heavy Truck Driver - Cementing (Duncan, OK, US, 73536)

Job Duties

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman. Reads and interprets instructions and documentation and plans work activities.
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another.
Loads and unloads vehicles.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Performs other duties and activities as directed.

Qualifications

High school diploma or equivalent required
Class A Commercial Driver's License (CDL) with Tanker Endorsement required
Must be able to operate manual transmission

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

215 East Bois D'Arc, Duncan, Oklahoma, 73536, United States

Job Details

Requisition Number: 199259
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Data Engineer (Rio de Janeiro, RJ, BR, 291941)

Job Duties

Job Summary:
We are seeking a Senior Data Engineer to design, implement, and optimize data pipelines and web applications. The ideal candidate brings strong expertise in Azure Databricks, Pyspark, Python, and SQL, with experience leading projects and improving architectures.

Key Responsibilities:

Design, debug, and optimize pipelines using Azure Databricks with Pyspark and Python for SQL Server, Delta Lakes, and Azure Synapse (serverless/dedicated).
Apply strong knowledge of SQL, Python, and core Data Engineering principles, with familiarity in Data Science.
Develop web apps and dashboards using Power BI, Flask, Dash, and Plotly.
Collaborate with data scientists to improve pipelines and resolve issues in Azure Databricks.
Propose and implement architectural enhancements to data pipelines.
Monitor cluster resources and optimize performance in Azure Databricks.
Utilize Git and Azure DevOps for versioning and deployment.
Use Matplotlib, Pandas, and NumPy for data analysis and visualization.
Contribute to a globally distributed team in dynamic and sometimes ambiguous environments.
Experience with Azure services like Power Apps and Azure Functions is a plus.

Qualifications

Required Qualifications:

Bachelor's or Master’s degree in Computer Science, IT, or related field.
Proven experience with data pipelines and handling large datasets.
Advanced proficiency with Azure Databricks, Pyspark, Python, and SQL.
Experience building web apps using Flask, Dash, and Plotly.
Strong skills in Pandas, NumPy, and Matplotlib.
Familiarity with Delta Lakes and Azure Synapse.
Proficiency with Git and Azure DevOps (or similar).
Strong analytical and troubleshooting abilities.
Fluent English, both written and verbal.
Comfortable working across time zones and diverse environments.

Preferred Qualifications:

Experience improving data architectures and workflows.
Familiarity with data science tools and frameworks.
Exposure to cloud platforms beyond Azure.

Location

Rua Paulo Emidio Barbosa 485 Q, Rio de Janeiro, Rio de Janeiro, 291941, Brazil

Job Details

Requisition Number: 199537
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logistics Specialist (San Fernando, SFO, TT)

Job Duties and Qualifications

Requires completion of an associate's degree in supply chain, Logistics, Engineering or related field. Bachelor's degree preferred.
Computer literate and proficient in MS EXCEL.
Have a “can do” attitude as well as energy and passion for learning.

Location

Coconut Drive Cross Crossing, San Fernando, , , Trinidad and Tobago

Job Details

Requisition Number: 197535
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Vedlikeholdstekniker - TSS (Stavanger, 11, NO, 4065)

Testing & Subsea Services (TSS) har økende aktivitet og har nå ledig stilling som vedlikeholdstekniker på vårt verksted i Tananger.

I verkstedet blir det vedlikeholdt og pakket utstyr som brukes i forbindelse med trykkbalansert boring (MPD+RCD) på offshore installasjoner. Vi ser etter deg som har lyst å gå gradene, bli godt kjent med utstyret og ha eierskap til verkstedet.

Hovedoppgavene vil i hovedsak bestå av:
- Vedlikehold av utstyr ihht digitalt vedlikeholdsprogram
- Høytrykksspyling, funksjon og trykktesting av utstyr
- Pakking/dokumentasjon av utstyr
- 5S og prosessforbedring
- Annet forefallende arbeid

Vi er klare for utfordringer – er du?
Våre verdier er fundamentet for alt vi gjør. Vi søker etter deg som kjenner seg igjen i våre verdier: sikkerhet, tillit, samarbeid, integritet og respekt.

Vi tilbyr:
Gode karriere- og utviklingsmuligheter
Dyktige kollegaer og vi verdsetter inkludering, likeverd og mangfold
Helse- og behandlingsforsikring
Konkurransedyktige pensjons- og forsikringsordninger
Gunstig aksjespareordning
Egen sosialklubb og flere arrangementer gjennom året
Gratis parkering samt egen bussordning

Kvalifikasjoner:
Truckførerbevis T1-T4
Traverskran
Fagbrev innenfor tekniske fag

Personlige egenskaper:
Vi søker etter deg som er god på å dele erfaring og ta imot ny kunnskap.
Det er til tider korte tidsfrister, noe som gjør det viktig at du er fleksibel og har god omstillingsevne.
Vi ser etter deg som har en positiv serviceinnstilling og bidrar til et godt arbeidsmiljø.
Vi søker deg som kan håndtere et til tider høyt arbeidstempo.
Du er resultatorientert og motiveres av utfordringer.

Språk:
Kandidaten bør ha gode kommunikasjons- og samarbeidsevner.
I denne stillingen er det viktig at du behersker norsk og engelsk flytende, både skriftlig og muntlig.

English version:

Testing & Subsea Services (TSS) is experiencing increased activity and is now hiring a Maintenance Technician for our workshop in Tananger.

At the workshop, we maintain and prepare equipment used for Managed Pressure Drilling (MPD + RCD) on offshore installations. We are looking for someone who is eager to grow in the role, become well-acquainted with the equipment, and take ownership of the workshop.

Main responsibilities:

Maintenance of equipment in accordance with digital maintenance program. Choke Manifolds, Metering Skids, Valves, piping, etc

High-pressure cleaning, function and pressure testing of equipment

Packing/documentation of equipment

5S and process improvement

General workshop duties

We’re ready for new challenges – are you?

Our values are the foundation of everything we do. We are looking for someone who identifies with our core values: safety, trust, collaboration, integrity, and respect.

We offer:

Excellent career and development opportunities

Skilled colleagues in an inclusive, equitable, and diverse work environment

Health and treatment insurance

Competitive pension and insurance schemes

Favorable employee stock purchase plan

Social club and several events throughout the year

Free parking and a dedicated shuttle bus service

Qualifications:

Forklift license (classes T1–T4)

Overhead crane certification

Trade certificate in a technical field

Personal qualities:

We are looking for someone who shares their experience and is open to learning new things.

There are often short deadlines, so it's important that you are flexible and adaptable.

We want someone with a positive, service-minded attitude who contributes to a good working environment.

You must be able to handle a high-paced work environment when needed.

You are results-oriented and motivated by challenges.

Language skills:

The candidate should have strong communication and collaboration skills.

In this position, it is essential that you are fluent in both Norwegian and English, written and spoken.

Location
Eldfiskvegen 1, 4056 Tananger - Norway

Product Service Line
Testing & Subsea
100% position

Contact Persons
Jone Østmoe (Jone.Ostmoe@Halliburton.com)

Deadline
28th July 2025

Investigator II (Houston, TX, US, 77032)

Job Duties

Under general supervision conducts internal investigations of alleged or suspected violations of Corporate policy and/or criminal/civil law based on facts, testimony and evidence.
Exercises reasonable latitude in determining investigative strategies and techniques while working independently in the planning and conducting of difficult and complex investigations of alleged or suspected violations of laws or policies involving criminal and/or civil statutes while also providing technical investigative services.
Develops investigative strategies, conducts interviews of witnesses, suspects and/or vendors to develop evidence and or testimony that can be used to resolve criminal and/or civil issues that are the focal point of the investigation.
Maintains a liaison with local, state and federal law enforcement agencies in order to achieve maximum results that support Corporate interests or efforts.
Work is reviewed by management for appropriate investigative techniques and to insure that Company defined policies and procedures are being followed.
Serves as a mentor for lower-level investigators as they plan, organize and conduct their investigative activity.
Involves lower-level investigators in complex investigations by allowing them to assist with the gathering of data, conducting and observing interviews, searching records, securing signed documents, and preparing reports.
In accordance with established procedures, prepares clear, comprehensive and cohesive investigative reports and statistical data in a timely manner.
Briefs senior management on investigative findings to assist in informed decisions regarding Corprorate actions.
Evaluates the latest products and techniques in communications and other technical support equipment utilized in investigations, and provides advice and consultations in there use.
Organizes and maintains a library of locally developed and commercial investigative tools to support programs.
Testifies before grand juries, courts and administrative hearings on investigative findings.

Qualifications

Skills typically acquired through completion of an undergraduate degree in Criminal Justice or related field and a minimum of 5-9 years of experience in criminal and/or corporate investigations.
Possession of or ability to obtain Texas Private Investigator license required.
Possession of or ability to obtain Texas Personal Protection Officer license is required.
Working knowledge of Microsoft Office and database research.
Ability to communicate effectively both verbally and in writing at all levels.
Strong time management and organizational skills to effectively manage and prioritize several tasks at one time in a time sensitive environment.
Must have proven interview and interrogation skills.
Foreign and domestic travel will be required, sometimes on short notice.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 200217
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Service Representative-Drilling Fluids (Barmer, RJ, IN, 344001)

Job Duties

Qualifications

Location

Near Kurja Fanta, NH -15, Barmer, Rajasthan, 344001, India

Job Details

Requisition Number: 200233
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Geoscience Advisor - Geoscience and Production - WPS & Sperry Drilling (Stavanger, 11, NO, 4065)

We are seeking a Geoscience Advisor to join our dynamic Geoscience and Production team. This is a senior-level technical position responsible to provide high-level geoscience output across multi-disciplinary subjects.

Job description:
A technical expert capable of functioning effectively under broad direction. Capable of leading a project or leading and coaching 5 to 10 employees at various levels of competence in the relevant technical domain(s). Accountable for the use of best practice work processes, projects, quality and commercial management. Recognizes and exploits the talents of his/her staff and demonstrates commitment to their competencies and career development. Is frequently involved in customer engagement and regularly contributes to business development activities. Gets involved regularly in budgeting and financial control and is active in strategy development. Effectively exploits a global network of professional contacts and typically contributes to 1 to 5 multi-disciplinary projects simultaneously within the geographical region. Functions at role model level in terms of consulting practice development, project delivery and business development. Mentor junior geoscientist and review technical work to ensure best practices and high quality work are delivered. Represent organization at technical forums to present case study and technical works. Knowledge and experience in LWD and WL borehole imaging is a plus.

We offer:
Great career and development opportunities
Highly skilled colleagues in a diverse environment
Company health insurance
Competitive pension- and insurance scheme
Beneficial employee stock-purchase plan
Social club with several arrangements throughout the year
Free parking and company bus arrangements

Qualifications:
Requires an undergraduate degree in STEM (Science, Technology, Engineering and Mathematics) with a minimum of 14 years of experience in Geoscience closely linked to Petrophysics. A postgraduate degree is preferred.

Personal qualities:
The position requires that you champion the Company's HSE procedures.
In this position it is important to work strategically and focused often with short deadlines. You must be proactive and flexible.

We are looking for candidates with good organizational skills, positive attitude and strong focus on working together towards our common goals.

Candidates should have good communication and teamwork skills.

We are looking for you who have a positive service attitude and contribute to a good working environment.

You are a team player with strong interpersonal skills.

Location:
Eldfiskvegen 1, 4056 Tananger Norway

Product Service Line:
Wireline & Perforating
Full time

Contact Persons:
Hiring Manager: Sarvagya Parashar (Sarvagya.Parashar@halliburton.com)

Application deadline:

20th July 2025

Supp Chain Business Process Analyst, Senior (Singapore, 05, SG, 637131)

Job Duties

Job Description

Under broad direction, identifies user requirements and assists with the design, development and documentation of supply chain business processes.
Assists in the development of user training and works with users to ensure that processes are correctly followed.
Communicates with supply chain business units to ensure business needs are met.
Is an advocate to the business unit and user community.
Coodinates and conducts user training. Assists in supervising others.
Provides basic job training and guidance on a regular basis; performs work of same or closely allied nature.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Requirement:

Skills are typically acquired through completion of an undergraduate degree in a Technical, Supply Chain, or Business related field and 4-10 years of experience in a supply chain related field. Should have direct experience in and extensive knowledge of supply chain business processes and process management techniques.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200952
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Industrial Electrical Technician (Apprentice - III) (Belle Fourche, SD, US, 57717)

***$2,000 Sign-On Bonus Available***

Job Description

Job Duties:

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Must possess advanced computer literacy.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

A high school diploma or equivalent is required.
1 year of experience in an electrical field are required.
Previous experience as an electrician is beneficial for this role.
A Technical Certification is preferred.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Electronic Technician II and Electronic Technician III.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

554 US Highway 212, Belle Fourche, South Dakota, 57717, United States

Job Details

Requisition Number: 200184
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Sign-on bonus is subject to certain conditions and approvals by area leadership.

I007-ESG-Coord, IT Business (Santa Cruz, S, BO)

Job Duties and Qualifications

Responsible for managing and prioritizing requests for hardware, software, systems access, and user support. Responsible for coordinating hardware and software installation and configuration for desktop computers, laptop computers, printers, servers, and networks. Reviews IT requirements to deliver the most cost-effective solutions in conformance with IT standards, policies, procedures, and best practices. IT Infrastructure Management. Leads development and implementation of effective strategies for information management and applications usage. Develops, reviews, and approves IT estimates. Acts as an escalation contact to help resolve IT service delivery and billing issues. Provides supervision, guidance, and training for less experienced personnel. Interprets and applies directions originating at a higher level. Maintain comprehensive records of IT systems, processes, and procedures. Implement cybersecurity measures to protect the organization's data and IT assets.

Requirements:

Bachelors 'degree in System Engineer, Telecommunications, or similar.

Requires 5 years of experience in coordination of Information Technology infrastructure management, user support, budgeting.

Problem-Solving: Ability to diagnose and resolve technical issues efficiently.

Advanced English proficiency is mandatory.

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 197149
Experience Level: Experienced Hire
Job Family: Information Technology
PSL: Information Technology
Full Time / Part Time: Full Time

Well Control Specialist (V) Project Management (Conroe, TX, US, 77385)

Job Duties

Responsibilities:
•   Under broad direction, provides on-site consulting and monitoring of oil well blowout and emergency conditions and assists in drilling operations, as well as, firefighting, well-killing and other blow out procedures in emergency drilling situations.
•   Confers with customer, as needed, to ensure that company interests are protected and that project completion goals are met.
•   Ensures that well-site activities are well managed, coordinated, and completed in accordance with Company policies, procedures, quality standards, and safety regulations.
•   Advises on specific servicing problems and recommends use of specialized tools, techniques, and services.
•   Assists in supervising repair and maintenance of equipment. Mentors and develops others.
•   Consistently communicating effectively verbally, in writing and by illustration.
•   Generates post job analysis report(s) including procedures that were successful and techniques that could be used to improve procedures that were not as successful as planned.
•   Job history of effectively evaluating project requirements and determining applicability of downhole tools.
•   Is able to demonstrate knowledge and operation of hydraulic equipment, operation, troubleshooting, repair or replacement of firefighting equipment.
•   Effectively evaluates project requirements and recommends appropriate fluid handling systems.
•   Implements special personnel safety provisions, regulatory requirements, obligations or deviations from normal operating procedures.
•   Champion's safety and Halliburton Management System service quality leadership and team building.
•   Identifies, communicates and addresses barriers to achieving project objectives.
•   Consistently using good judgment to demonstrate leadership in adherence to HSE and HMS service quality policies and procedures.
•   Demonstrates knowledge, operation, troubleshooting, repair or replacement of jet cutter equipment and systems.
•   Supervises the delivery of appropriate B&C well control services for customers on complex projects.
•   Demonstrates understanding and application of Well Control, identifying cause and effect of well control events, and analyzing and managing risks.
•   Consistently executes, manages and designs solutions for customers.
•   Ensures that appropriate work agreements are executed with customers.
•   Is able to perform surface interventions.
•   Is able to demonstrate appropriate and successful well control procedures.
•   Capable of troubleshooting, repairing and replacing wellheads and wellbore components.
•   Supervises extraordinary well control situations (i.e.: shallow gas, gas flow after cementing, lost circulation, off bottom kicks, underground blowouts, etc.).

Qualifications

Qualifications:
•   Completion of an undergraduate degree in engineering preferred or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
•   Minimum of 20 years of experience in well site operations.
•   Must work under hazardous conditions including high pressure, high temperature, loud noise, fire, chemical and gas exposures, moving machinery, etc.
•   Must be able to maintain professional relationships with customers.
•   Well organized with strong planning and project management skills required.
•   Attention to detail, quality orientation required.
•   Must be able to organize multiple projects.
•   Excellent communication skills.
•   Strong problem-solving abilities.
•   Strong PC computing skills, including MS Office and engineering software.
•   Good communication and effective working relationships exist with other departments.

Location

16548 Donwick Drive, Conroe, Texas, 77385, United States

Job Details

Requisition Number: 198307
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Halliburton Project Management
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Macaé & RJ (Capital) - Banco de Talentos PcD (Jovem Aprendiz) (RJ, BR)

REQUISITOS

Ensino Médio Completo;
Idade mínima de 18 anos;
Disponibilidade para dedicar-se ao programa por 4h/dia de segunda a sexta;
Residir próximo a Macaé e região ou Rio de Janeiro Capital;
Interesse em desenvolver atividades administrativas.

Localização

Macaé, RJ & Rio de Janeiro, RJ

Número da Requisição

193344

R&D Electrical Engineer (Tech Center) (RJ, BR)

Positions Summary

Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving engineering problems during the development and application of new and improved products and processes.
Establishes best practices that incorporate Reliability, Health, Safety, and Environment concepts to guide others in analysis and design.
Evaluates proposed theoretical results to meet design requirements.
Serves as a technical expert to other employees to solve complex system equations and develops custom equations to simplify complex problems by using advanced engineering tools.
Serves as a technical expert by coaching, developing, and reviewing work from other employees.
Possesses excellent communication and interpersonal skills to collaborate with cross- disciplinary teams.
Significantly contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.
Work across multiple teams located in different countries (Brazil, US, Singapore, India).
Work close to the Electrical Engineering team, Systems Engineer, and the Project Manager at the Halliburton Technology Center in Brazil (HBTC).

Requirements

R&D Electrical/Electronic Engineer (System Engineer)

Bachelor's degree in electrical engineering or similar discipline.
Completion of a master’s or doctoral degree in Electrical Engineering or similar discipline is preferred.
10+ years of experience in R&D is preferred.
Experience with multidisciplinary teams located in different locations/countries.
Experience in design of complex systems solutions including several engineering disciplines for Oil & Gas, mining and/or aerospace industry.
Experience in designing solutions for subsea applications and well control involving multiple disciplines.
Experience in designing solutions for well intervention applications involving multiple disciplines.
Experience with equipment deployments on vessels.
Advanced working knowledge in electronic circuit design and in commonly used circuit simulators (LTSPICE, PSPICE, etc.) and math tools (Matlab, MathCAD, etc.) applied to embedded systems in harsh environments (O&G, mining or aerospace).
Ability to provide guidance and mentoring to more junior engineers as needed.
Knowledge and participation in patent processes.
Prepare and deliver project status reports regularly to various stakeholders.
Experience defining requirements and reviewing proposals from third party (manufacturers, vendors, and suppliers).
Knowledge of vessels structure and process.
Advanced knowledge and experience in leading Risk Assessment, FMEA, other reliability tools.
Knowledge and working experience in oil field equipment.
Knowledge in designing system automation using robotics is desirable.

R&D Electrical/Electronic Engineer (Control Engineer)

Bachelor's degree in electrical engineering or similar discipline.
Completion of a master’s or doctoral degree in Electrical Engineering or similar discipline is preferred.
10+ years of experience in R&D is preferred.
Experience with multidisciplinary teams located in different locations/countries.
Experience in design of complex systems solutions including several engineering disciplines for Oil & Gas, mining and/or aerospace industry.
Experience in designing solutions for subsea applications and well control involving multiple disciplines is desirable.
Experience in designing solutions for well intervention applications involving multiple disciplines is desirable.
Ability to provide guidance and mentoring to more junior engineers as needed.
Knowledge and participation in patent processes.
Prepare and deliver project status reports regularly to various stakeholders.
Advanced knowledge and experience in leading Risk Assessment, FMEA, other reliability tools.
Familiarity with power control and communication systems/solutions.
Advanced working knowledge in electronic circuit design and in commonly used circuit simulators (LTSPICE, PSPICE, etc.) and math tools (Matlab, MathCAD, etc.) applied to embedded systems in harsh environments (O&G, mining or aerospace).
Experience in designing system automation using robotics.
Experience in designing models, control design and simulation of electrical and mechanical system with standard software (Matlab, Labview, ROS, PLC software,..).
Strong background and knowledge in different aspects of control system design, signal processing and analyses, feedback loops and system dynamics.
Knowledge in ROV activities, subsea inspection and autonomous underwater systems is desirable.
Knowledge of MIMO for motion planning (sensing, feedback for power/torque).

R&D Electrical/Electronic Engineer (Wireline Engineer)

2 years of experience in R&D is desirable.
Experience in designing solutions for subsea applications and well control involving multi disciplines is desirable.
Experience in designing solutions for well intervention applications involving multi disciplines is desirable.
Experience defining requirements and reviewing proposals from third party (manufacturers, vendors, and suppliers).
Familiarity with Risk Assessment and FMEA.
Knowledge in oil field equipment related to wireline and/or digital slickline.
Familiarity with power control and communication systems/solutions.
Working knowledge of electronic circuit design and in commonly used circuit simulators (LTSPICE, PSPICE, etc.) and math tools (Matlab, MathCAD, etc.) applied to embedded systems in harsh environments (O&G, mining or aerospace) is desired.
Knowledge in designing models, control design and simulation of electrical and mechanical system with standard software (Matlab, Labview, ROS, PLC software etc.).

Location

Rio de Janeiro, RJ - Brazil (Technology Center)

Job Details

Requisition Number: 191686
Experience Level:
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

R&D Mechanical/Automation Engineer or System Engineer (Subsea Engineer) (RJ, BR)

Position Summary

Demonstrates creativity, foresight, and mature engineering judgment in anticipating and solving engineering problems during the development and application of new and improved products and processes.
Establishes best practices that incorporate Reliability, Health, Safety, and Environment concepts to guide others in analysis and design.
Evaluates proposed theoretical results to meet design requirements.
Serves as a technical expert to other employees to solve complex system equations and develops custom equations to simplify complex problems by using advanced engineering tools.
Serves as a technical expert by coaching, developing, and reviewing work from other employees.
Possesses excellent communication and interpersonal skills to collaborate with cross- disciplinary teams.
Significantly contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.
Work across multiple teams located in different countries (Brazil, US, Singapore, India).
Work close to the Mechanical Engineering team, Systems Engineer, and the Project Manager at the Halliburton Technology Center in Brazil (HBTC).

Requirements

Bachelor's degree in Mechanical Engineering or similar discipline.
Completion of a master’s or doctoral degree in Mechanical Engineering or similar discipline is preferred.
5 years of experience in R&D is preferred.
Experience in design of complex systems solutions including several engineering disciplines for Oil & Gas, mining and/or aerospace industry.
Experience in designing solutions for subsea applications and well control involving multiple disciplines.
Experience in designing solutions for well intervention applications involving multiple disciplines.
Ability to provide guidance and mentoring to more junior engineers as needed.
Experience defining requirements and reviewing proposals from third party (manufacturers, vendors, and suppliers).
Knowledge and experience in Risk Assessment, FMEA, other reliability tools.
Advanced knowledge of SolidWorks and Ansys (CAD and FEA).
Advanced knowledge to apply principles of mechanics (static and dynamic), hydraulics, and materials.
Experience in mechanical design, fluid mechanics, structural analysis, and/or material science.
Knowledge and working experience in oil field equipment.
Knowledge in designing system automation using robotics is desirable.

Location

Rio de Janeiro, RJ - Brazil (Technology Center)

Job Details

Requisition Number: 191685
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Full Time / Part Time: Full Time

BS09-ESG-Svc Supv II-SS (Neiva, HUI, CO)

Job Duties

Under general supervision, helps drive service quality by planning, coordinating, directing, and overseeing service line work at the wellsite. Plans and performs necessary calculations for the total job at the well site as needed. Evaluates individual performance levels of the crew and trains operators to improve their job performance. This position requires the ability to effectively communicate with others, perform basic mathematical calculations involving addition, subtraction, multiplication, and division, and basic reading comprehension and writing skills. Basic computer skills are preferred. This position promotes and takes an active part in the quality improvement process, promotes safety awareness and environmental consciousness, complies with all applicable safety and environmental procedures and regulations, and ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Completion of specific Baroid training is preferred. A high school diploma or equivalent and a minimum of five years&apos experience is required.

Qualifications

Location

Kilometro 3 via Bogota, Neiva, , , Colombia

Job Details

Requisition Number: 200984
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Service Representative-Fluid Performance I (Al-Khobar, 04, SA, 31952)

Job Duties

Under strict supervision, works directly with both fluids and equipment supervisors and technical professionals to gain a better understanding of rig operations, company products and services, fluids, separation, and waste management technologies. Completes formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and learns to provide well site service to customers. Learns to operate, maintain and optimize Baroid equipment including testing, separation, and waste management equipment. Learns to adequately prepare and track inventory of palletized and bulk products and equipment spares at the rig site based on the drilling program and anticipated conditions. Assists with interpreting results of routine and specialized testing in order to provide technical solutions. Assists in the operation of some separation and waste management equipment and has knowledge of how such equipment affects overall fluid performance. Complies with health, safety and environment regulations in all aspects of job performance. Performs in a professional manner as a Halliburton representative with clients. Learns how to maintain good working relationships with operator&aposs representative and rig personnel. No previous work experience is required. Completion of a Bachelor&aposs Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor&aposs Degree program is required. This is an entry level position.

Qualifications

Location

Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 200826
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor-Cementing (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site, providing quality service to the customer.
Ensures customer satisfaction with work performed.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Job role may require cross training and active participation in another product service line.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions. Skills are typically acquired through a high school diploma, or similar education and 2 years of experience as Service Supervisor-Cementing, I.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Candidate must meet the minimum developmental standards for this job classification.
Demonstrates proficiency in the operation and maintenance of each type of equipment/unit/tool normally used in the product service line.
Has exceptional skills within the service line and a general understanding of other service functions.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 198118
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor -Cementing (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, coordinates and oversees cementing service line work at the well site handling the more complex, hazardous, and/or high profile jobs while providing quality service to the customer.
Job role may include sales, job design, execution, and follow up activities.
Cross trains and active participates in one or more product service lines.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center's viability or its quality of service via personal contributions.
Skills are typically acquired through a high school diploma, or similar education and 2 years of experience as Service Supervisor-Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Must meet the minimum developmental standards for this job classification.
Demonstrates proficiency in the operation and maintenance of each type of equipment/unit/tool normally used in the product service line.
Has exceptional skills within the service line and specific knowledge and understanding of other service functions.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 199575
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate Accountant (Bangalore, KA, IN, 560103)

Job Duties

Under direct supervision, develops working knowledge and understanding of the company&aposs business systems, business processes and controls, including policies and procedures, relative to the location and department assigned. Prepares basic accounting reports and accounting analyses with related spreadsheets or applications input. Develops working knowledge of the organizational structure of the company. Prepares and posts journal vouchers for basic accounting transactions. Researches basic accounting issues and transactions including related internal controls. Applies technical accounting skills typically acquired through completion of a university degree in accounting. Knowledge of US GAAP or country-specific accounting principles required. Requires completion of an undergraduate degree in accounting, business, or other related field. No previous accounting experience required. Job role is developmental and intended to expose incumbents to basic aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as beginning levels of proficiency with industry and company acumen.

Qualifications

Location

6th Floor, Hibiscus Tower 2 Bu, Bangalore, Cantal, 560103, India

Job Details

Requisition Number: 197642
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Associate R&D Electrical Engineer (Duncan, OK, US, 73533)

Job Duties and Qualifications

Under direct supervision, applies functional requirements and uses engineering tools to design electronic circuits or control systems for product changes or new development.
Uses software tools or applications to analyze and conduct tests on electronic circuits or systems and document performance in comparison with design criteria.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Assists in preparing component specifications, follows work processes to document designs, and assists in preparation of material for design reviews.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information.
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.

Requirements:

Skills acquired through the completion of an undergraduate degree in Electrical Engineering or similar discipline.

Location

2600 South 2nd St, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 192768
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Regulatory Affairs Professional/Hazard Communication (Houston, TX, US, 77032)

Job Duties and Qualifications

Under direct supervision, applies specialized knowledge of jurisdictional or specialty chemical regulatory requirements to company chemical products.
Accesses product data and assists with responding to customer's chemical regulatory compliance questions.
Obtains regulatory and chemical composition from suppliers required for hazard communication, permits, and other regulatory needs.
Prepares data and documents required by government, third party, and other authoritative bodies to support product registration, reporting, and other regulatory activities within a region or area of specialty (e.g. biocides).
Collaborates with chemical stewardship team members to evaluate and minimize risk and to drive compliance of existing products lines, changes, and innovation projects in support of chemical stewardship and regional objectives.
Assists in developing and maintaining worldwide product classifications.
Provides technical support to product lines to commercialize new and amended registered chemical products, minimize time to market, and ensure continued compliance on the market.
Contributes to the development and maintenance of applicable chemical compliance management documents and training materials, including in the development of the Chemical Stewardship Management System that meets the needs of company standards and jurisdictional regulatory requirements.

Requirements:

Requires an undergraduate or Bachelor's degree with studies in Environmental Science, Chemistry, Health Sciences or equivalent science or technical fields (STEM).
Requires at least two years of relevant chemical regulatory compliance management experience.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available including Regulatory Affairs Professional, Senior Regulatory Affairs Professional, or Principal Regulatory Affairs Professional.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 194938
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: HSE
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electrical Power Systems Engineer (Principal - Senior Advisor) (Houston, TX, US, 77032)

Role Overview: Join our dynamic team to collaborate on reviewing customer applications using electric technologies for Low and Medium Voltage power systems in Halliburton’s Production Enhancement Product Service Line (PSL). You will support the development, delivery and commissioning of advanced technology solutions for oil & gas applications, aiming to improve operational efficiency, reduce costs and emissions, and maximize well productivity.

Key Responsibilities:

Foster collaboration in developing technical solutions for electrical low and medium voltage power systems
Work with design, maintenance, and operation teams to ensure safe, reliable deployment of high-performance solutions
Engage with engineers, contractors, and suppliers to ensure component and subsystem performance, reliability, and quality
Analyze, design, and optimize electrical power systems for reliable and efficient power delivery. Including generation, distribution, and utilization of electricity
Create specifications, procedures, installation instructions, and test documents
Utilize various systems and software tools, including internal Product Data Management systems, SAP, and Microsoft Office
Participate in hands-on lab, full-scale, or field testing of relevant equipment and systems
Travel to well sites, customer offices, vendor offices, and other locations as required (10-15% of the time, including weekends and holidays)

Qualifications:

Bachelor’s degree in electrical engineering with at least 5 years of power systems engineering experience; a Master’s degree is preferred
Experience with customer applications of mobile electrical gear
Experience solving complex issues and designing technical solutions related to power systems
Proficiency in electrical analysis software (e.g., SKM, ETAP)
Hands-on experience with electrical equipment and systems, including micro-grids, utility interfaces, NG generators, turbines, medium voltage switchgear, transformers, motor control centers, AC motors, and protection systems
Preferred experience in medium voltage power generation/distribution for oil & gas applications
Familiarity with large-scale industrial processes (chemical, pharmaceutical, oil & gas refining)
Understanding of commissioning power system solutions and troubleshooting skills

Skills:

Ability to read and interpret electrical and mechanical drawings, schematics, P&IDs, flow charts, and cause and effect diagrams
Proficiency in system analysis (load flow, short circuit, stability studies, fault, and harmonic analysis)
Excellent communication and critical thinking skills

Travel:

Required travel to various locations, including well sites and customer/vendor offices (10-15% of the time)
Unleash your potential and make a meaningful impact in a fast-paced environment with Halliburton

Unleash your potential and make a meaningful impact in a fast-paced environment with Halliburton.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher-level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available from a Principal Electrical Engineer, Advisor Electrical Engineer up to the Senior Advisor Electrical Engineer

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 198332
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement (Technology)
Full Time / Part Time: Full Time

Additional Locations for this position: Duncan, Oklahoma (Preferred) or Houston, Texas

Service Specialist -Completions Tools (Mumbai, MH, IN, 400057)

Job Duties

Under general supervision, oversees the installation of the least complex well completion products in the geographic area. Typically operates as a one-person crew. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction. Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose. Performs all aspects of the job in compliance with HMS processes. Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Demonstrates knowledge of pre and post-job product and service activities (employee's ongoing participation in these pre and post-job processes will vary by location). Properly maintains assigned equipment and ensures compliance with safety regulations and procedures. Interacts with third parties whose activities could impact the process of installing completion products to assure proper coordination. Trains service operators in areas of expertise. Conducts and documents all Halliburton HSE related activities at the well site-site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor. Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations. Promotes and takes an active part in the quality improvement process. Develops his/her knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings. Develops customer service, negotiation and leadership skills.

Key Responsibilities/Accountabilities:

• Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed
• Demonstrates knowledge of pre and post-job product and service activities and develops knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings
• Promotes safety awareness and environmental consciousness by conducting and documenting all HSE-related activities at the well site, and promotes and takes an active part in the quality improvement process
• Consults with customers concerning products and services, promotes good customer relations at the well site, and ensures customer satisfaction with job execution and interpersonal interaction
• Properly maintains assigned equipment and monitors compliance with safety regulations and procedures
• Trains service operators in areas of expertise
• Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel
• Reviews the job design, confirms that the job packet includes the proper equipment and processes to achieve the job purpose, and identifies any additional contingencies that should be provided for
• Oversees the installation of the least complex well completion products in the geographic area, typically operating as a one-person crew
• Interacts with third parties whose activities could impact the process of installing completion products to ensure proper coordination
• Develops relationships with customers to meet requirements, manage expectations, recommend and carry out on the job changes from the wellsite.
• Work with service coordinators to verify equipment and material for pre-job preparation.

Qualifications

Basic Qualifications: Graduation/Diploma (minimum)

Total Years of Experience: 4 years

Desired/Preferred Expertise: Completions

Location: Barmer/Kakinada/Mumbai, India

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 198934
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Mechanical Engineer, Associate (Singapore, 05, SG, 637131)

Job Duties

Under supervision applies functional specifications and uses engineering tools to design hardware for product changes and new development.
Assists in preparing component specifications, follows work processes to document designs, and prepares materials for design reviews.
Under minimal supervision, uses engineering tools to document calculations and compare the results in controlled databases.
Identifies the testing objectives at a component level in accordance with Halliburton's Health, Safety, and Environment procedures and evaluates test results.
Collaborates with mentors to understand the basic content required to submit an invention disclosure, and recognizes ideas that have IP potential without disclosing confidential information.
Works effectively as a team member by communicating clearly and efficiently to provide innovative solutions.
Takes the initiative to go beyond what situations require and focuses on attention to detail by making sure that work is done correctly, completely, and to the highest standards.
Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 201041
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logging and Perforating Field Engineer, Associate to Senior (Open Hole) (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under direct supervision, assists in the preparation and execution of Open Hole logging services on customer's location in accordance with HMS.
This is the entry level position for this discipline and will train directly under the supervision of an appropriate frontline leader or a competent Field Professional assigned by the frontline leader to gain knowledge of operations.
Assists in checking equipment prior to and after logging operations.
Gains familiarity with Surface System and Open Hole tools through field work under mentorship.
Promotes and ensures compliance with Health, Safety and Environment (HSE) and Service Quality (SQ) standards, practices and guidelines.
Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 200195
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logging and Perforating Field Engineer, Senior (Open Hole) (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties and Qualifications

Under general supervision, applies knowledge of Halliburton's Open Hole Wireline technologies to independently provide a comprehensive set of basic and complex services and tool operation to customers at the well site
Applies engineering, mechanical and geological principles to articulate more complex data interpretations to clients from proprietary software and coaches clients through more routine drilling scenarios independently
Continues to learn how to interpret data outcomes with more complexity through mentorship from wireline field leadership
Integrates understanding of the wireline business, operational procedures and to a lesser degree the collaboration of other service lines into guidance provided to customers
Provides guidance to junior wireline field professionals on delivering less complex services and tool operations to customers

Requirements:

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Minimum of 2.5 years of experience in Open Hole Wireline field operations required.

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 197574
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logging and Perforating Field Engineer, Associate to Senior (Open Hole) (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under direct supervision, assists in the preparation and execution of Open Hole logging services on customer's location in accordance with HMS
This is the entry level position for this discipline and will train directly under the supervision of an appropriate frontline leader or a competent Field Professional assigned by the frontline leader to gain knowledge of operations
Assists in checking equipment prior to and after logging operations
Gains familiarity with Surface System and Open Hole tools through field work under mentorship
Promotes and ensures compliance with Health, Safety and Environment (HSE) and Service Quality (SQ) standards, practices and guidelines

Requirements:

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 197636
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&M (Repair & Maintenance) - Electrical Technician (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under direct supervision, performs diagnoses, repairs, preventative maintenance, calibration, and inspections on down-hole tool electronics and other equipment used in the application for down-hole tools, including Directional/ RSS and/or M/LWD sensors.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Areas of specialization may include: mechanical aptitude, electronics aptitude, computer skills, assembly and disassembly of Measure While Drilling and/or Logging While Drilling down-hole tools.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Requires a technical school certificate, or equivalent, and a minimum of one year of relevant experience in equipment repair and maintenance.
An associate degree or higher is preferred.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 201036
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor III-Slickline (Abu Dhabi, AZ, AE)

Job Duties

Under general supervision, leads a crew in providing the complete range of slickline services in a geographic area under all operating conditions. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction. Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose. Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job. Performs all aspects of the job in compliance with HMS processes. Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Performs onsite emergency unit/equipment maintenance as needed. Demonstrates knowledge of pre and post-job product and service activities (employee&aposs ongoing participation in these pre and post-job processes will vary by location). Properly maintains assigned equipment and ensures compliance with safety regulations and procedures. Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination. Mentors and assesses service operators and operator assistants in areas of expertise. Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations. Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork. Participates in post-job review with his/her supervisor. Promotes and takes an active part in the quality improvement process. Develops and demonstrates the ability to run new technology as it becomes available. Assists with the review, validation and update of local HMS processes.

Qualifications

Location

Plot no. 106HR9&107GR12, Abu Dhabi, Abu Dhabi, , United Arab Emirates

Job Details

Requisition Number: 201055
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Engenheiro de Geodireção Sr. (Macae, RJ, BR, 27930-070)

Job Duties and Qualifications

Under general supervision, creates complex geosteering models for customer for pre-well planning stage utilizing the advance knowledge of the well environment and drilling operations. Performs as a lead-hand geosteering professional in basic geosteering jobs, and as a second hand in complex geosteering jobs by providing logging data analysis and geological interpretation resulting in modification of the well plan to make accurate and safe drilling recommendations to the customer for optimum achievement of the well goals, including optimum placement of the well bore, hazard avoidance, and/or reservoir mapping. Ensures the pre-well data is properly collected, quality checked, and accurately loaded into the geosteering software. Communicates recommendations internally and to Operator personnel as the expert to ensure that the objectives of the projects are met by offering relevant solutions needed to achieve the goal. Presents complete, detailed, accurate and professional reports to the customer as required, and maintains an updated standard well summary file during the well to assist in writing the end-of-well report. Identify problems impacting the geosteering job execution and present solutions. Supports real time communication tools used to provide visualizations of available interpreted geological data to the customer. Requires an undergraduate degree in Geoscience, Petroleum Engineering or other STEM degree and a minimum of 2.5 years of relevant industry experience, including 1 year of geosteering experience.

Location

Av Pref Ar Fer Silva 1000, Macae, Rio de Janeiro, 27930-070, Brazil

Job Details

Requisition Number: 196224
Experience Level: Experienced Hire
Job Family: Sales & Marketing
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Wells Engineer (Consultant III-Hal Consulting) (Lagos, RI, NG)

Job Duties

Proficient in Halliburton Landmark Drilling & Completions E&P Applications (EDT Suites, EDM, Compass, WellCAT, Torque & Drag etc. and its equivalent).
Field operations experience during wells campaign
Ability to run Basis of Design (BOD)
Team Player and ability to work with team during detailed Field Development Plan.
Liaise with customer on their unique need for planning a well and engineering design
Experience in onshore and offshore drilling and completions projects
Understand project management in wells campaign logistics
Understand input requirements for AFE
Understand drilling challenges of shallow hazards and associated mitigation
Liaise with multi-disciplinary team in mapping out Long Lead Items and ordering process

Qualifications

Location

Plot 90, Ajose Adeogun Street, Lagos, Lagos, , Nigeria

Job Details

Requisition Number: 200432
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Halliburton Consulting
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Tool Tech I (Perth, WA, AU, 6164)

Job Duties

Under strict supervision, performs maintenance functions such as repairs on down-hole tools, surface equipment and other production equipment in the application for down-hole tools.
Assembles and disassemble down-hole tools, surface equipment, and other production equipment.

Qualifications

Basic computer skills are preferred.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are preferred.
This is the entry level position into the tool tech family.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the quality improvement process.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 201035
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Completion Tools
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Logging and Perforating Field Professional - General Field Professional (198535) (New Iberia, LA, US, 70560)

Job Duties

Under general supervision, applies knowledge of Halliburton's Seismic logging products and technology to complete routine tasks that acquire geophysical data through the use of less complex logging equipment on a customer's location.
Ensures all data and deliverables presented to the customer are accurate, timely and meet quality standards in accordance to Halliburton Management System (HMS).
Provides technical and operational expertise to external customers. Follows guidance from senior field professionals for pre-job planning, job execution, post job analysis, and overall performance of company assets on location.
Promotes and ensures compliance with Health, Safety and Environment (HSE), and Service Quality (SQ) standards, practices and guidelines.

Qualifications

Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 1 year of experience in field logging operations required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Senior Field Professional or General Field Professional.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

719 Hanger Dr, New Iberia, Louisiana, 70560, United States

Job Details

Requisition Number: 198535
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Asst II-Cementing - Celle (Celle, HH, DE, 29227)

Job Duties

JOB DESCRIPTION:

Under strict supervision, assists during rigging-up and rigging-down of cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, rigging-up appropriate data monitoring equipment.
Learns basic oil well operations including but not limited to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending calculations to include liquid additives and weighted spacers, pressure to reverse, and determining burst and collapse.
Assists in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Assists in the performance of pre-trip and post-trip vehicle inspections and associated paperwork/reports.
Understands hazardous materials, job, wash up and discharge procedures.
Verifies correct line up of valves on bulk systems and surface manifold equipment.
Job tasks, correctly performed, have minimal impact upon the viability of the organization.
Error is readily ascertainable by the supervisor and can be corrected.
Skills are typically acquired through successful completion of high school or similar education and 0-6 months of experience as an Operator Asst-Cementing I.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: Cementing II and Service Tools I.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.

Qualifications

Location

Bruchkampweg 42, Celle, , 29227, Germany

Job Details

Requisition Number: 199928
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Planner, II (Al-Khobar, 04, SA, 31952)

Job Duties

Under general supervision, oversees the SAP process from sales order creation to preparation for delivery and invoicing. Insures accuracy of job related requisitions and communicates with service coordinator on sales order accuracy and secures sign off. Responsible for daily inventory commitment and reconciliation. Troubleshoots and resolves SAP order to cash issues. Create requisitions as required and supports processing and/or transfer of cost to a sales orders or mobile business unit (MBU). Create standing maintenance orders to assign sundry item cost to MBU. May serve as a backup on quote team for quotation creation. May serve as a backup to service coordinator for sale order creation. May perform scheduling of personnel and equipment in sales orders; reports on personnel utilization and equipment and maintains scheduling board. Skills are typically acquired through a high school diploma or similar education and 3 years as a Service Planner I. Must complete the basic intermediate order to cash training course. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in the quality improvement process.

Qualifications

Location

Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 201045
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Electronics Technician (I - III) (Prudhoe Bay, AK, US, 99734)

Job Description

Job Duties:

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairing a variety of electronic and/or electrical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting electronic and/or electrical schematics/drawings/prints.
Performs work within a variety of Halliburton specific software and hardware.
Must possess advanced computer literacy.
Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.

Qualifications:

A high school diploma or equivalent and 1 year of experience in an electrical field are required.
Skills are typically acquired through a aqualified technical school certificate in electronics or related experience.
Preferred qualifications include an A.S. degree in Electronics Technology with previous experience in the troubleshooting and repair of electronic components.
Must have a current and valid driver's license and a clean motor vehicle record.

Hiring Up:

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Electronics Technician II and Electronics Technician III.

Additional Information

Halliburton covers the first flight from the lower 48 to Anchorage, AK.
10% Alaska living allowance available to employee's whose primary residence is in Alaska.
5% Alaska living allowance available to employee's whose primary residence is outside of Alaska
Lodging and meals provided during scheduled work rotation
Position is eligible for a travel stipend of $700/month for employee’s whose primary residence is not in Alaska.
Employee's residing outside of Alaska are responsible for coordinating their own travel to and from Anchorage, AK for their work rotation as well as their own transportation to and from the airport and the Halliburton facility in Anchorage.
3 weeks on 3 weeks off schedule Halliburton reserves the right to adjust schedules based on industry needs.

World Class Benefits:

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

Pouch 340026, Prudhoe Bay, Alaska, 99734, United States

Job Details

Requisition Number: 199850
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A427-ESG-Intern (Neuquen, Q, AR, 8300)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 199649
Experience Level: Internship
Job Family: Support Services
PSL: [[division]]
Full Time / Part Time: Full Time

Reforma . Operator en bombeo de Fluido de Estimulación y Fracturas (Reforma, CHP, MX, 29500)

Job Duties

Under direct supervision, performs equipment rig up and rig down on location and prepares equipment for performing a job. Ensures customer satisfaction with work performed. Responsible for safe operations of service equipment, including but not limited to: DME, high pressure pumps, and/or blenders during the delivery of services in accordance with the customer&aposs job design and KPIs. Performs necessary calculations at the well site as needed. Performs data collection and data distribution on jobs as needed. Coordinates the clean up, repair, and preparation of equipment for the next job. Utilizes competency processes to enhance skills development and job performance. Must be knowledgeable of HMS and HSE standards. Promotes and contributes to safety awareness and environmental consciousness. Promotes and takes an active part in quality and continuous improvement processes. Consequences of error are easily measured and can be confined. Skills are acquired through six months of experience and completion of required competencies at current and next level. Requires completion of a high school diploma or equivalent.

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 198951
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Frac Acid Service Supervisor III (200939) (Zanesville, OH, US, 43701)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite.
Plans and performs necessary calculations for the total job at the wellsite as needed.
Coordinates and directs the activities of operators during the equipment rig up and rig down on a location and the preparation of equipment for performing a job.
Provides planning necessary for the job including instructions to the crew and dispute resolutions to approved levels.
Ensures customer satisfaction with jobs performed. May perform data collection and data distribution on jobs.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Provides input on individual performance levels of his/her subordinates providing on-the-job skills development to enhance job performance.
Job tasks, correctly performed, impact directly on cost containment, efficiency, profitability of operations.
Performs Service Leader job duties when the Service Leader is not present.
Must possess exceptional skills within the service line and have a general understanding of other service functions.
Leads pre- and post-job safety meetings in order to promote safety awareness and environmental consciousness.
Ensures compliance with HSE standards, practices and guidelines.
Must possess excellent knowledge of HMS standards, work methods and processes.
Promotes and takes an active part in quality and continuous improvement processes.

Qualifications

Skills are acquired through four years of experience and completion of required competencies at current and next level.
Requires completion of a high school diploma or equivalent.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

4999 East Pointe Drive, Zanesville, Ohio, 43701, United States

Job Details

Requisition Number: 200939
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Heavy Truck Driver (Duncan, OK, US, 73536)

Job Duties

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman.
Reads and interprets instructions and documentation and plans work activities.
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another.
Loads and unloads vehicles.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Performs other duties and activities as directed.

Qualifications

High school diploma or equivalent required
Class A Commercial Driver's License (CDL) with Tanker Endorsement required
Must be able to operate manual transmission

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

215 East Bois D'Arc, Duncan, Oklahoma, 73536, United States

Job Details

Requisition Number: 198881
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Misc Support
Full Time / Part Time: Full Time

Additional Locations for this position:

Schedule: 6 days on, 3 days off *Halliburton reserves the right to adjust schedules based on industry needs.*

Compensation Information
Compensation is competitive and commensurate with experience.

Stockpoint Plant Operator (200771) (Golden Meadow, LA, US, 70357)

Job Duties

This position is on a 1 week on 1 week off rotational schedule *Halliburton reserves the right to adjust schedules based on industry needs.*

Under direct supervision, safely and effectively supports the daily stockpoint operations through mixing liquid mud, loading bulk products, and shipping & receiving pallet materials for the purpose of ensuring the delivery of quality customer service, world-class safety, and stockpoint efficiency.
Checks material orders for proper quantities.
Operates forklifts as required.

Qualifications

Skills are typically acquired through on the job training.
Skills are Typically aquired through a minimum 2 years experience in stockpoint operations.

World Class Benefits:

Medical, dental, vision, coverage in addition to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with a matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

182 N Doucet Dr, Golden Meadow, Louisiana, 70357, United States

Job Details

Requisition Number: 200771
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Baroid
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Downstream Account Representative (I-II) - MultiChem - Donaldsonville, LA (Geismar, LA, US, 70734)

Job Duties

This position will support our Donaldsonville, Louisiana location.

Under direct supervision, builds customer satisfaction by providing service and on-site support for the application of downstream chemical products.
Ensures area revenue and profitability in assigned accounts while assisting in the development and implementation of sales plans for prospective customers.
Develops a working knowledge of downstream utility and hydrocarbon processes to interpret data, present information clearly, and troubleshoot potential problems.
Observes, studies, and begins to manage the practical application of chemical programs.
Learns how organizational support functions work together to meet internal Halliburton and external customer needs by actively participating in team activities and projects.
Works with site and area management to discover new chemical applications for existing customers.
Demonstrates adaptability and initiative to strengthen sales and service skill sets.
When necessary, performs the functions of Principal Site Service Representative.

Qualifications

Requires completion of an undergraduate degree in a STEM discipline; Chemical or Mechanical Engineering, Chemistry, Biology, Geology, or Environmental Science degree preferred.
No previous experience in downstream refinery, chemical, or NH3/fertilizer facilities is required.
Other requirements of this position include the ability to obtain a Transportation Worker Identification Credential (TWIC) for entry into downstream chemical facilities.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

Donaldsonville, Louisiana

Job Details

Requisition Number: 200292
Experience Level: Entry-Level
Job Family: Sales & Marketing
Product Service Line: Multi-Chem
Full Time / Part Time: Full Time

Additional Locations for this position: Donaldsonville, Louisiana

Compensation Information
Compensation is competitive and commensurate with experience.

Operador UAP - Estimulaciones y Fracturas (Reforma, TAB, MX, 29500)

Job Duties

Qualifications

Location

Reforma a Boca Limon km 2.49, Reforma, Chiapas, 29500, Mexico

Job Details

Requisition Number: 200709
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Principal Lead Accountant (Houston, TX, US, 77032)

Job Duties

Under general supervision, applies knowledge of the company's financial and accounting systems, processes, policies and procedures
Demonstrates knowledge in complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen
Performs complex financial analysis and reconciliations
Understands organizational structure of the core businesses of the Company
Reviews and monitors financial transactions for accuracy and timeliness
Researches and resolves complex accounting issues and transactions including related internal controls
Prepares, analyzes and distributes financial results including variance explanations involving more complex accounting issues
Ability to take the lead on tasks and communicate with other departments to resolve issues in addition to assisting with review of work for lower-level staff
Assists with quarterly reporting of earnings release and SEC filings
Performs ad-hoc analyses and actively participate in ongoing projects and process improvements.Assists with government surveys
Meets deadlines and works well in a fast-paced environment to produce accurate results

Qualifications

Knowledge of US GAAPCompletion of an undergraduate degree in accounting
Minimum of 5 years of experience in accounting
CPA, or actively working toward certification
Experience working with Hyperion systems a plus
Experience with SAP/S4 a plus
Experience with Workiva a plus
Strong ability to apply critical thinking and analytical skills
Solid attention to details, highly organized, and great time management skills
Excellent verbal and written communication.Proficiency in Microsoft applications, such as Excel, Word, PowerPoint, etc.

Location

3000 N. Sam Houston Parkway E., Houston, Texas, 77032, United States

Job Details

Requisition Number: 199912
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Production Planner (Al-Khobar, 04, SA, 31952)

Job Duties

Under direct supervision, the Production Planner is responsible for production order management and daily execution on the shop floor. This job is the first level in the Manufacturing Scheduling job family. At this level, the Production Planner has limited autonomy to deviate from established processes, but is expected to develop their understanding of the principles necessary to exercise such judgment at the upper levels of the Manufacturing Scheduling job family. The Production Planner receives training to be able to plan and schedule routine orders for their assigned product lines and to resolve related problems affecting delivery for short-term (<30 days) planning horizons. Performs release of production orders within acceptable guidelines, uses dispatch report to coordinate schedule execution, and performs inventory management functions to optimize material flow. The Production Planner will have a basic understanding and knowledge of: Forecasting, FP, MRP, Excel, Theory of Constraints, Master Data, Engineering Change Management, and Inventory Turns. Enterprise Resource Planning (ERP) experience is preferred. Requires a high school diploma or equivalent, and a minimum of two years working in manufacturing, procurement, or customer service.

Qualifications

Location

Near Dammam Jubail Hwy, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 199808
Experience Level: Entry-Level
Job Family: Manufacturing & Supply Chain
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Coordinator, Performance Development-Maintenance (Aberdeen, ABE, GB, AB21 0GN)

Job Duties

JOB DESCRIPTION:

Under general supervision, enables service quality and customer satisfaction by providing training and guidance to individuals engaged in maintenance activities.
Plans, coordinates, competency program adherence, employee development, and career development tools.
Provides training on global and local Halliburton Management System (HMS) standards, processes, and work methods.
Reviews performance data to identify and communicate trends and opportunities for performance improvement to senior management.
Has direct accountability for adherence to HMS and the service quality delivery of the maintenance product on the shop floor and remote locations.
Coordinates and assists with the Correction, Prevention, and Improvement (CPI) program as well as, audit, HSE and SQ incident investigation, review, and closure of subsequent corrective actions.
Ensures adherence to, and accurate maintenance of, as well as input of, data into Halliburton's systems of record for the responsible location(s).
High school diploma or equivalent is required and completion of an undergraduate degree in STEM is preferred.
Five years of experience in manufacturing or maintenance operations including three years of lead/supervisory experience is required.

Qualifications

Location

Howemoss Crescent, Aberdeen, Aberdeen, AB21 0GN, United Kingdom

Job Details

Requisition Number: 199233
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Material Coordinator I (Jubail, 04, SA, 31951)

Job Duties

Under direct supervision, receives assignments, instructions, and direction for daily activities. Job role generally works directly with a product service line (PSL) and is responsible for handling all inventory related issues such as goods receipts, goods issues to sales orders, inventory counting and reconciliation, to support timely and accurate billing. The PSL Material Cordinator I also requires an understanding of the relevant PSL and their products. Performs other duties and activities as directed. Two year degree and 1 years work experience preferred. Experience working in a warehouse environment environment is preferred. Entry level position. No previous experience required.

Qualifications

Location

101 King Abdulaziz Road, Jubail, , 31951, Saudi Arabia

Job Details

Requisition Number: 200579
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Operator Assistant I-Separation Solutions (Al-Khobar, 04, SA, 31952)

Job Duties

Under strict supervision, learns basic oil well operations including but not limited to drilling fluids and solids control operations. Assist in the rigging-up and rigging-down of service equipment, and in the operation of some or all of the following equipment: shale shakers and screen changes, centrifuges, cuttings handling and slurrification systems, and vacuum and pressure washing systems. This position requires the ability to effectively communicate with others, perform basic mathematical calculations involving addition, subtraction, multiplication, and division, and basic reading comprehension and writing skills. Basic computer skills are preferred. This position promotes and takes an active part in the quality improvement process, promotes safety awareness and environmental consciousness, complies with all applicable safety and environmental procedures and regulations, and ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. A high school diploma or equivalent is required.

Qualifications

Location

Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 200311
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Operator I-Separation Solutions (Al-Khobar, 04, SA, 31952)

Job Duties

Under direct supervision, rigs-up and rigs-down of service equipment, learns to complete documents, reports, and forms in support of the service performed, and may conduct training in the operation of some or all of the following equipment: shale shakers and screen changes, centrifuges, cuttings handling and slurrification systems, and vacuum and pressure washing systems. This position requires the ability to effectively communicate with others, perform basic mathematical calculations involving addition, subtraction, multiplication, and division, and basic reading comprehension and writing skills. Basic computer skills are preferred. This position promotes and takes an active part in the quality improvement process, promotes safety awareness and environmental consciousness, complies with all applicable safety and environmental procedures and regulations, and ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Completion of specific Baroid training is preferred. A high school diploma or equivalent and a minimum of six months experience is required.

Qualifications

Location

Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 199832
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Research and Development Mechanical Engineer, Principal (Al-Khobar, 04, SA, 31952)

Job Duties

Leads programs by establishing project development plans and approving design documents that follow Health, Safety, and Environment processes. Provides engineering guidance and uses advanced engineering techniques to meet complex design criteria. Develops custom equations and solutions using various engineering tools. Provides recommendations for tests results and assists with complex tests. Reviews and assesses appropriate standards, regulations, and specifications for testing and reliability analysis on projects and processes. Delivers innovative Intellectual Property recommendations for Halliburton and reviews technical papers. Provides technical expertise to meet internal and external customer needs and requirements. Promotes and contributes to a cohesive team environment and maintains open lines of communication with all levels of the organization. Represents Halliburton in professional societies in area of specialization. Skills acquired through the completion of an undergraduate degree in Mechanical Engineering or similar discipline and seven years of related experience. Completion of a masters or doctoral degree in Mechanical Engineering or similar discipline is preferred.

Qualifications

Location

Jubail Highway Abu Hadria Exit, Al-Khobar, Al Khobar, 31952, Saudi Arabia

Job Details

Requisition Number: 200895
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

AM110-ESG-Production Advisor (Quito, P, EC, 170514)

Job Duties

Under broad direction from the Senior Production Advisor and the Integrated Asset Management senior management and with support from engineering and operations staff across HAL product service lines (PSL), the Production Advisor works within a senior, multi-discipline technical team that evaluates developing potentially large, challenging unconventional plays and mature oil and gas fields for potential investment. The Production Advisor analyzes production history, well files, gathering, transportation and processing equipment. Models decline curve analysis and nodal analysis of inflow versus outflow performance between the reservoir and the wellbore. Forecasts production and cost of upgrading facilities. After investment, identifies innovative ways to apply HAL production technology, service capability and expertise to improve efficiency, production and costs resulting in new, step-change field exploitation methodologies. This production technology, service capability and expertise includes completion systems - tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment - sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems; waterflooding and other enhanced recovery techniques. Additionally, mentors production personnel and oversees work and decisions from the Field Development Plan and Production teams including decline curve analysis and nodal analysis to select workover or re-completion candidates and equipment for gathering, transportation and processing production. Requires an undergraduate degree in petroleum, chemical, or mechanical engineering and a minimum of 10 years of experience in production operations including experience in oil & gas operations and management.

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 200155
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
PSL: Halliburton Project Management
Full Time / Part Time: Full Time

Service Supervisor -Coiled Tubing (Mumbai, MH, IN, 400093)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite.
Plans and performs necessary calculations for the total job at the well site as needed.
Coordinates and directs the activities of subordinate supervisors, service operators and operator assistants during the equipment rig up and rig down on a location and the preparation of equipment for performing a job.
Provides planning necessary for the job including instructions to the crew and dispute resolutions to approved levels. Ensures customer satisfaction with jobs performed. As needed, may perform data collection and data distribution on jobs.
Coordinates the clean up, repair, and preparation of equipment for the next job. Provides input on individual performance levels of his/her subordinates providing on-the-job skills development to enhance job performance.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined. Skills are typically acquired through completion of HAL career development requirements as Service Supervisor l.
Must possess exceptional skills within the service line and have a general understanding of other service functions.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness. Ensures compliance with Health, Safety, and Environmental (HSE) standards, practices and guidelines.
Must posses execellent knowledge of Halliburton Management System (HMS) standards, work methods and processes. Licensure to drive commercial vehicles may be required. Promotes and takes an active part in quality improvement processes.
Must possess the ability understand to Well Bore schematic, analyze computer programs (IWI) and operational procedures. Basic computer skills are preferred. Must possess good leadership and negotiating skills.

Qualifications

Location

Guru Hargovindji Marg, Mumbai, Monaghan, 400093, India

Job Details

Requisition Number: 198210
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Production Solutions
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Field Service Specialist General - Directional Drilling (Phawong, Muang, Songkhla, 90, TH, 90100)

Job Duties

Under broad direction, provides on-site supervision of the Measurement-While Drilling (MWD)/Logging-While Drilling (LWD) and Directional Drilling (DD) process, including tool preparations, data acquisition, log generation and quality control, projections of the well path to predetermined target coordinates, and delivery of services to the customer.
Understands principles of Bottom Hole assembly (BHA) selection and aspects of DD performance and ensures that BHA's are assembled as planned including correct make-up torque, doping and handling.
Ensures that all data presented to the customer is accurate, timely, and meets the highest possible service quality standard.
Provides technical consultation and advice to customers using M/LWD and DD software, well path projections, well profile plots, survey calculations, and accurate directional survey data provided according to the clients surveying procedures.
Advises on mud hydraulics, Bottom Hole Assembly (BHA) planning, formation evaluation, drilling tendencies, the mud system and BHA dynamics, log generation, basic geo-steering services, and data quality.
Properly tests all tools and equipment before, during and after each job.
Identifies and corrects operational problems to prevent or minimize service impact.
Accurately completes all required forms, databases, and reports (i.e. service vouchers, lost/damaged equipment, radiation site survey, End of Job Customer Survey (EJCS) report, First Alert Database (FAD)/Correction, Prevention and Improvement (CPI).
Participates in performance improvement initiatives as required.
Ensures all equipment, personnel and resources needed to perform the service is available and that equipment is laid out after use in accordance with company procedures and manifested for backload at the end of the job.
Maintains records of all DD equipment at well site including dimensional data and condition.
Ensures a daily M/LWD and DD report is completed and copied to client's onsite and offsite drilling teams and to the Service coordinator, and where applicable, may be responsible for submitting an accurate daily cost for the M/LWD and DD services.
Ensures BHA compatibility, planned operating parameters are within specification, and correct toolface references are applied.
Serves as the lead engineer on most jobs.
Fosters teamwork and assists in the training and development and the performance evaluation of onsite personnel.
Requires completion of a high school diploma or equivalent.
An undergraduate degree in a STEM discipline is required.
Requires completion of the basic M/LWD and DD training programs, and a minimum of three years of experience in LWD and DD field operations, preferably including experience as a FSS, II.
Must possess or be able to obtain any relevant on or offshore safety certificates.

Qualifications

Location

235/5Moo 2 Lopburi-Ramate Road, Phawong, Muang, Songkhla, Songkhla, 90100, Thailand

Job Details

Requisition Number: 201077
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A017-ESG-Accountant, Sr (Luanda, LUA, AO)

Job Duties

Under general supervision, applies knowledge of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned. Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input.
Prepares and posts journal vouchers for complex accounting transactions.
Reviews and monitors financial transactions for accuracy and timeliness.
Researches and resolves complex accounting issues and transactions including related internal controls.
Prepares, analyzes, and distributes financial results including variance explanations.
Participates in multi-functional teams and develops project management skills.
Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen.
Minimum of three (3) years of experience in accounting related roles required.
Requires completion of an undergraduate degree in accounting, business, or related field.
Knowledge of US GAAP or country-specific accounting principles required.

Qualifications

Location

Base Sonils,P.de Luanda/CP3736, Luanda, Luanda, , Angola

Job Details

Requisition Number: 199776
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Corporate
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

A427-ESG-Intern (Santa Cruz, S, BO)

Job Duties

Qualifications

Compensation Information
Compensation is competitive and commensurate with experience.

Location

Opportunities may exist in multiple locations.

Job Details

Additional Locations for this position:

Requisition Number: 198721
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
PSL: Cementing
Full Time / Part Time: Full Time

L030-ESG-Field Prof, General-L&P (Dubai, PM, SR)

Job Duties

Under general supervision, applies knowledge of Halliburton&aposs Open Hole Wireline technologies to independently provide all wireline services and tool operation to customers at the well site. Responsible for most complex drilling scenarios, highly visible clients and special projects with high compexity. Applies engineering, mechanical and geological principles to articulate complex data interpretations to clients from proprietary software and coaches clients fully through expected outcomes of various drilling scenarios independently. Integrates understanding of Halliburton business, operational procedure and serves as a liaison in collaborations with other service lines to provide guidance to customers. Provides guidance to junior wireline field professionals on delivering less complex services and tool operations to customers. Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job. Minimum of 3.5 years of experience in Open Hole Wireline field operations required.

Qualifications

Location

DBSC, 23rd Floor,SRT,Dubai WTC, Dubai, Dubai, , United Arab Emirates

Job Details

Requisition Number: 198722
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

L030-ESG-Field Prof, General-L&P (Dubai, PM, SR)

Job Duties

Qualifications

Location

DBSC, 23rd Floor,SRT,Dubai WTC, Dubai, Dubai, , United Arab Emirates

Job Details

Requisition Number: 198809
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Svc Spec III-TCP (San Fernando, SFO, TT)

Job Duties

Under general supervision, routinely works in more than one type of well site and base camp as assigned by Service Coordinator. Coordinates and oversees Tubing Conveyed Perforating (TCP) PSL functions at the well site and base camp. Provides the planning necessary for the job including equipment set up, well site direction, and customer-related support activities. Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp. Promotes and takes an active part in the Quality Improvement Process. Ensures compliance with HSE regulations and guidelines. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. May help train service operators in areas of expertise. May monitor instruments and perform necessary calculations to assure quality of data/job. Consults with customers concerning services and products, promotes good customer relations at the well site, and assures customer satisfaction with results. Properly maintains assigned equipment and monitors compliance with safety regulations and procedures. Confers with Service Coordinator on major decisions. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills are typically acquired through 5 years of experience as an operator. Must meet the minimum competencies for Operator Assistant II, Service Operator I, and Service Specialist I and II.

Qualifications

Location

Coconut Drive Cross Crossing, San Fernando, , , Trinidad and Tobago

Job Details

Requisition Number: 198626
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor I-Slickline (Perth, WA, AU, 6164)

Job Duties

Under general supervision, leads a crew in providing the least complex slickline services in a geographic area. Is accountable for onsite customer satisfaction.
Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job.
Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed.
Performs onsite emergency unit/equipment maintenance as needed.

Qualifications

Demonstrates knowledge of pre and post-job product and service activities (employee's ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Trains service operators and operator assistants in areas of expertise.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site - site assessments and risk analyses, onsite safety meetings, PPE use, etc.
Completes all well site and post-job paperwork.
Participates in post-job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Develops his/her knowledge and skills to be able to run more complex, and/or a broader range of, HES offerings.
Develops customer service, negotiation and leadership skills.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 200896
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Specialist - GBA (Labuan, 15, MY, 87009)

Job Duties

Under general supervision, performs all phases of the rigging up and down of service line equipment on work locations both on and offshore.
Provides the planning necessary for the job including equipment set up, well site direction, and customer related support activities.
Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp.
Mentors and trains lower level Service Operators and Operator Assistants in areas of expertise.
Monitors instruments and performs necessary calculations to ensure quality of the data at well.
Consults with customers concerning services and products, promotes good customer relations at the well site, and ensures customer satisfaction with results.
Checks and verifies equipment as per job plan, properly maintains equipment and completes all job documentation.
Conducts pre- job toolbox safety meetings, reviews and verifies job plan with customer representative and manages any changes required.
The ability to perform basic mathematical calculations is required.
Basic reading comprehension and writing skills are required.
Skills are acquired through completion of a high school diploma and 6+ years experience in oil field drilling activities including 4+ years of underbalanced drilling and/or managed pressure drilling.
Must have met the minimum competency requirements for Svc Spec II-GBA.

Qualifications

Location

Bay No.1 Rancha Industrial Est, Labuan, Labuan, 87009, Malaysia

Job Details

Requisition Number: 201003
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Testing and Subsea
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Technical Professional - Sand Control (Kuala Lumpur, 14, MY, 50400)

Job Duties

Under direct supervision, develop skills to allow for technical interpretation and operational assistance at the wellsite during fracpac, sand control, and matrix acidizing operations in a professional manner.
Assists in pre job planning, pre job quality assurance and control, field level execution, and post job documentation as on the job training.
Assists in the delivery of Sand Control services.
Works alongside operations to develop equipment based knowledge.
Requires ability to interpret well site data.
Knowledge will be built through completion of courses based on equipment training, fracturing methods and materials, data acquisition, fracture mechanics, pressure analysis while pumping, diagnostic pumping, fluids evaluation, and sand control theory.
This is an entry level position.
Completion of an undergraduate degree in a STEM (Science, Technology, Engineering, Mathematics) discipline is required.

Qualifications

Location

Lvl 10, 199 Jalan Tun Razak, Kuala Lumpur, Kuala Lumpur, 50400, Malaysia

Job Details

Requisition Number: 201048
Experience Level: Entry-Level
Job Family: Engineering/Science/Technology
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&M (Repair & Maintenance) Supervisor - Drilling (Vung Tau, 43, VN)

Job Duties

Under broad direction, supervises a repair and maintenance facility by organizing and coordinating activities involved in maintaining and repairing down-hole, electronic, and surface equipment for one or more product lines.
Ensures equipment is maintained according to global maintenance standards.
Mentors employees on proper operation and maintenance of equipment.
Oversees training and development of technicians.
Ensures compliance with HSE regulations and guidelines and that safety procedures are followed during the repair process.
Orders and efficiently maintains an adequate inventory of parts and supplies to ensure timely maintenance.
Promotes continuous improvement of shop processes.
Areas of specialization may include mechanical or electrical aptitude and performing major repairs & maintenance.
Assists in making evaluations and recommendations for improvements on equipment based on maintenance history.
Requires an Associate's Degree, or equivalent, and a minimum of five years of experience, including as an equipment repair and maintenance technician.
Management experience is preferred.

Qualifications

Location

14B Le Hong Phong, Ward 8, Vung Tau, Vung Tao, , Viet Nam

Job Details

Requisition Number: 201011
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Sperry Drilling Svcs
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Material Coordinator I (Singapore, 05, SG, 637131)

Job Duties

Under direct supervision, responsible for ensuring timely materials goods movements, accurate and appropriate storage and movement of products and inventory accuracy.
Also responsible for other daily operations functions of the warehouse which includes various clean-up and housekeeping activities.
Two year degree and 1 years work experience preferred.
Experience working in an operations environment is preferred, including knowledge and use of handheld scanners and lift truck certification.
Job will also require the performance of other duties and activities as directed.
Entry level position.
No previous experience required.

Qualifications

Location

11 Tuas South Avenue 12, Singapore, Singapore, 637131, Singapore

Job Details

Requisition Number: 200827
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Specialist I-Frac Acid (Roma, QLD, AU, 4455)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite.
Plans and performs necessary calculations for fluids management at the well site as needed.
May coordinate the activities of service operators during equipment rig up, rig down, and the preparation of equipment for performing a job.
Ensures customer satisfaction with work performed.
Performs data collection and data distribution on jobs as needed.
Responsible for conducting pressure pumping operations, such as spotting acid and other fluids, in accordance with job design parameters safely and consistently in accordance with the job plan.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Utilizes competency processes to enhance own skills development and job performance.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency and profitability of operations.

Qualifications

Must possess exceptional skills within the service line and have a general understanding of other service functions.
Must be knowledgeable of HMS, HSE standards, work methods and guidelines.
Promotes and contributes to safety awareness and environmental consciousness.
Promotes and takes an active part in quality and continuous improvement processes.
Skills are acquired through 1.5 years of experience and completion of required competencies for current and next level.
Requires completion of a high school diploma or equivalent.

Location

Lot 9 Roma Downs Road, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 200420
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor I-Frac Acid (Roma, QLD, AU, 4455)

Job Duties

Under general supervision, promotes excellent customer relations at the worksite.
Plans and performs necessary calculations for fluids management at the well site as needed.
Coordinates the activities of and provides guidance to operators during equipment rig up, rig down, and the preparation of equipment for performing a job.
Ensures customer satisfaction with work performed.
Responsible for the management of the chemical inventory at the wellsite.
May perform data collection and data distribution on jobs.
Responsible for conducting operations in accordance with fluid design parameters and the job plan.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Utilizes competency processes to enhance employee skills development and job performance.
Job tasks, correctly performed, impact directly on cost containment, efficiency and profitability of operations.

Qualifications

Must possess exceptional skills within the service line and have a general understanding of other service functions.
Must be knowledgeable of HMS, HSE standards, work methods and guidelines.
Leads pre- and post-job safety meetings in order to promote safety awareness and environmental consciousness.
Promotes and takes an active part in quality and continuous improvement processes.
Skills are acquired through two years of experience and completion of required competencies for current and next level.
Requires completion of a high school diploma or equivalent.

Location

Lot 9 Roma Downs Road, Roma, Queensland, 4455, Australia

Job Details

Requisition Number: 200430
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Production Enhancement
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Planner (Tangerang Selatan, JK, ID, 15314)

Job Duties

Under general supervision, oversees the SAP process from sales order creation to preparation for delivery and invoicing.
Insures accuracy of job related requisitions and communicates with service coordinator on sales order accuracy and secures sign off.
Responsible for daily inventory commitment and reconciliation.
Troubleshoots and resolves SAP order to cash issues.
Create requisitions as required and supports processing and/or transfer of cost to a sales orders or mobile business unit (MBU).
Create standing maintenance orders to assign sundry item cost to MBU.
May serve as a backup on quote team for quotation creation.
May serve as a backup to service coordinator for sale order creation.
May perform scheduling of personnel and equipment in sales orders; reports on personnel utilization and equipment and maintains scheduling board.
Skills are typically acquired through a high school diploma or similar education and 3 years as a Service Planner I.
Must complete the basic intermediate order to cash training course.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the quality improvement process.

Qualifications

Location

Kawasan Industri & Pergudangan, Tangerang Selatan, Banten, 15314, Indonesia

Job Details

Requisition Number: 199524
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Payroll Representative (Bengaluru, KA, IN, 560103)

Job Duties

Under direct supervision, functions as a member of a Payroll Unit, whose primary responsibility is the processing of employee payrolls, which includes HR and Payroll data gathering, processing, accounting, internal reporting, audit, and external reporting and remittance of all applicable wages and taxes.
Demonstrates a general understanding payroll tax laws.
Provides support for projects of medium complexity and required to produce proper supporting documentation related to applicable payroll reports, audits, accounting, and tax filings.
Assists with the preparation of required documentation in support of internal controls as directed by the process guidelines. Assists with analysis, reconciliation, and ultimate resolution of a variety of payroll issues.
Actively seeks support and guidance from subject matter experts on complex queries and issues to provide resolution.
Takes an active part in continuous improvement process. A high school diploma or equivalent and at least 1 year of related experience required. A Bachelors Degree is preferred.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 201012
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Oilfield Heavy Truck Driver - DFW, TX (Alvarado, TX, US, 76009)

***$1,500 Sign-On Bonus***

Job Duties

Reports to and receives assignments, instructions, and direction from the Foreman or General Foreman.
Reads and interprets instructions and documentation and plans work activities.
Operates company vehicles with capacity of up to 30 tons to move materials, tools, and equipment to and from work locations in support of construction and maintenance activities and/or deliver operating materials and supplies from one warehouse to another.
Loads and unloads vehicles.
Observes and follows all safety rules and procedures, including wearing required personal safety equipment.
Performs other duties and activities as directed.
Schedule: 6 days on, 3 days off (Halliburton reserves the right to adjust schedules based on industry needs)

Qualifications

High school diploma or equivalent required
Class A CDL (Commercial Driver's License) required
Tanker and Hazmat Endorsement preferred
Ability to operate manual transmission preferred

Compensation Information

Compensation is competitive and commensurate with experience.

Potential Annual Earnings: $86,000 - $106,000/yearly
- - Average annual earnings is an estimation dependent on hours worked per week, overtime hours worked, product service line, location, and position. An offer of employment with Halliburton does not guarantee employment for any length of time. Actual pay will be discussed and finalized at the time of the offer.
$30.00/day per diem per business practice

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

3045 CR 401, Alvarado, Texas, 76009, United States

Job Details

Requisition Number: 199496
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Misc Support
Full Time / Part Time: Full Time

Service Operator Cementing (Tangerang Selatan, JK, ID, 15314)

Job Duties

Under direct supervision, rigs up and rigs down cementing service equipment on work locations to include spotting of cement storage vessels, pre-mixing of spacer fluids, identifying additives to be mixed on-the-fly, rigging-up appropriate data monitoring equipment, planning emergency backup equipment and contingencies.
Learns to perform pre-job calculations related to: pipe capacities and volume/height math, plug landing pressures, absolute volumes (including total water requirements for job), hydrostatic and differential pressure, resulting forces, balanced plugs, bulk cement blending, calculations to include liquid additives and weighted spacers, and pressure to reverse.
Learns to complete documents, reports, and forms related to the cementing service performed.
Trains and provides guidance to operator assistants in the proper performance of pre-trip and post-trip vehicle inspections and associated paperwork and/or reports.
Trains operator assistants in the operation of some or all of the following: cement pumping and mixed equipment, blenders, liquid additive metering systems, centrifugal pumps, data acquisition systems, Automatic Density Control (ADC) systems, bulk cement blending, delivery, and storage systems, manifold equipment, and cementing plug releasing tools.
Demonstrates basic knowledge of products such as cementing blends, spacer fluid systems, sodium silicate fluid system, loss circulation additives, casing attachments, float equipment, multiple stage cementing tools, and squeeze packers.
Understands basic lab test data such as pump time, density, yield, water ratio, etc.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Skills are typically acquired through successful completion of high school or similar education and at least 6 months of experience as an Operator Asst-Cementing, II.
Licensure to drive commercial equipment may be required.
May require I-Learn courses: General Hydraulics for Downhole Tools and Essential Preventative Maintenance.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
A passing score on job-related tests or meeting task guidelines is required.

Qualifications

Location

Kawasan Industri & Pergudangan, Tangerang Selatan, Banten, 15314, Indonesia

Job Details

Requisition Number: 201007
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant (Tangerang Selatan, JK, ID, 15314)

Job Duties

Under general supervision, understands the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Prepares accounting reports, and increasingly complex accounting analyses with related spreadsheets or applications input, and identifies and resolves issues.
Understands organizational structure of the company.
Prepares and posts journal vouchers for accounting transactions.
Researches and resolves basic accounting issues and transactions including related internal controls.
Requires completion of an undergraduate degree in accounting, business, or other related field and a minimum of nine (9) months of experience in accounting related roles.
Knowledge of US GAAP or country- specific accounting principles required.
Job role is developmental and intended to expose incumbents to moderately complex aspects of general accounting, internal controls, financial analysis and reporting, forecasting, and financial applications as well as intermediate levels of proficiency with industry and company acumen.

Qualifications

Location

Kawasan Industri & Pergudangan, Tangerang Selatan, Banten, 15314, Indonesia

Job Details

Requisition Number: 199522
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

R&D Chemist- Cementing (Pune, MH, IN, 411001)

Job Duties

Under direct supervision, applies current laboratory HSE standards to solve technical problems by understanding Halliburton technology and performing optimization. Involved in the research and development of new technologies, products and services under the direction of experienced scientists and managers. Under general direction, executes projects by choosing proper test methods and drawing meaningful conclusions from test data which contributes to Intellectual Property topics of their domain. May establish working relationships with customers, and internal technical community. Develops relationships through excellent communication skills and acts as a key resource to provide innovative solutions. Participates in professional societies in area of specialization. Skills acquired through the completion of an undergraduate degree in Chemistry or similar discipline. Minimum educational requirement Master's degree in science or similar discipline and three to five years' experience or Bachelor's degree and four years' experience.

Job Description:

Under general supervision, the candidate shall be able to come up with solutions for tuning the properties of cementitious materials/admixtures through detailed understanding of chemistry of functional groups. The job demands thorough knowledge of cement chemistry and the inorganic chemicals and polymers used in cement admixtures along with hands on experience in literature search, innovation, lab-scale synthesis, product development and product scale-up for various applications.

Qualifications

• Educational Qualification and Experience: M.Sc. Chemistry with 3-5 yrs /Ph.D. Chemistry with 1-3 yrs

Knowledge, Skills, and Abilities

Required skillet

Hands-on experience of Literature Search, Synthesis and Product Development
Knowledge of Surfactants, Organic/Polymer Chemistry
Communication skills and ability to collaborate with global teams.

Preferred additional skillset

Thorough knowledge of cement chemistry and cement admixtures
Exposure to product development process e.g. LIFECYCLE
Ability to design, guide and perform fit-for-purpose experimentation

Location

Sai Radhe Building, Pune, , 411001,

Job Details

Requisition Number: 199339
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Cementing
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

LP05-ESG-Svc Spec I-L&P (Cairo, C, EG)

Job Duties

Under general supervision, operates surface and down hole well logging equipment, and pressure control equipment on work locations for the purpose of recording information about sub-surface geologic formations. Functions as service expert for a particular well logging service (i.e., Tool pusher, Memory Production Logging, Memory Caliper Service, Selective Formation Testing). Typically operates as one-person crew. Obtains pertinent service work information from the customer and effectively utilizes information to perform a specific well logging operation. Performs pre-job calculations as required. Rigs-up and rigs- down surface and down-hole well logging equipment including electric, nuclear, sonic, other well logging tools, and pressure control equipment. Assembles and operates surface and down hole well logging equipment at job site. Operates Pressure control equipment. Maintains, cleans and performs preventative maintenance on down-hole and surface well logging equipment. Recognizes possible sales opportunities for the Company&aposs other products and services and communicates information to Service Coordinator or appropriate Company staff. Communicates pre-job and on-the-job progress to customer. Communicates and negotiates with customer to resolve issues concerning invoicing service irregularities. Performs pre and post job vehicle and equipment inspections and associated paperwork and/or reports. May provide guidance and training to less experienced Service Operators and Operator Assistant staff. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Skills are typically acquired through successful completion of high school or similar education and 1 year of experience as a Service Operator-L&P, II. Licensure to drive commercial equipment may be required in certain locations. Successful completion of Well Control Accreditation Program may be required (Optional). Successful completion of water survival training may be required. Given the nature of oil field service work, the ability to communicate effectively with others is necessary. The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required. Basic reading comprehension and writing skills are required. Basic computer skills are required. Must be knowledgeable on HMS standards and guidelines for PSL personnel. Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations. Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines. Promotes and takes an active part in quality improvement processes.

Qualifications

Location

Plot #30 North Kattamey, Cairo, Cairo, , Egypt

Job Details

Requisition Number: 201010
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Fld Svc Rep-Fluid Perf III (Cairo, C, EG)

Job Duties

Under general supervision, provides well site service to customers. Applies content learned through the formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and well site service delivery. Works directly with both fluids and equipment supervisors and technical professionals. Demonstrates advanced knowledge of company products and services, rig operations, and fluids, separation, and waste management technologies and related processes. Performs in a professional manner as a Halliburton representative, maintaining good working relationship with operator&aposs representative and rig personnel. Conducts and interprets results of routine and specialized testing in order to provide technical solutions. Conducts the operation of some separation and waste management equipment and demonstrates understanding of how they affect overall fluid performance. Demonstrates advanced ability to adequately prepare and track inventory of palletized and bulk products and equipment spares at the rig site based on the drilling program and anticipated conditions. Demonstrates advanced ability to operate, maintain and optimize equipment including testing, separation, and waste management equipment. Complies with health, safety and environment regulations in all aspects of job performance. Mentors and helps in the development of junior employees. High school diploma or equivalent required. Completion of a Bachelor&aposs Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor&aposs Degree program is preferred. Position also requires completion of Baroid Core Training Course at Halliburton or other industry recognized program and 2-4 years of fluids and separation equipment experience.

Qualifications

Location

Plot #30 North Kattamey, Cairo, Cairo, , Egypt

Job Details

Requisition Number: 200858
Experience Level: Entry-Level
Job Family: Operations
Product Service Line: [[division]]
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Consultant, Sr (Beijing, BJ, CN, 100020)

Job Duties

Under general supervision, has good knowledge and understanding of applicable science and technology, gained through formal education and work experience. Working with customers, demonstrates knowledge of existing and emerging technology and product areas. Communicates to individual clients how the use of technology solutions allow them to be more productive. Is able to articulate and apply mainstay process for assignment delivery. As an individual contributes to project teams. Effectively plans and manages own workload to meet desired service level targets. Maintains a consistent client-focused approach with clients and/or individuals. Requires completion of an undergraduate degree in engineering, geoscience, computer science or business and a minimum of 5 years of experience.

Qualifications

Location

10/F W World Financial Centre, Beijing, Aube, 100020, China

Job Details

Requisition Number: 201123
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Landmark Software & Services
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Service Supervisor III-L&P (Perth, WA, AU, 6164)

Job Duties

Under general supervision, operates surface and down hole well logging equipment, rig hoist, and pressure control equipment on work locations for the purpose of recording information about sub-surface geologic formations.
Functions as service expert for a range of well logging services (e.g., Memory Production Logging, DHV , Caliper etc.).
Typically operates as one-person crew and performs more than one well logging service as a recognised expert.
Obtains pertinent service work information from the customer and effectively utilizes information to perform a specific well logging operation.
Performs pre-job calculations as required.
Rigs-up and rigs-down of surface and down-hole well logging equipment including electric, nuclear, sonic, other well logging tools, and pressure control equipment (PCE).
Assembles and operates surface and down hole well logging equipment at job site.
Operates PCE.
Supervises Service Supervisors, Service Specialists, Service Operators, and Operator Assistants at the wellsite.
Maintains, cleans and performs preventative maintenance on down-hole and surface well logging equipment.
Recognizes possible sales opportunities for the Company's other products and services and communicates information to Service Coordinator or appropriate Company staff.
Communicates pre-job and on- the-job progress to customer.
Communicates and negotiates with customer to resolve issues concerning invoicing service irregularities.
Performs pre and post job vehicle and equipment inspections and associated paperwork and/or reports.
Provides guidance and training to less experienced Service Specialists, Service Supervisors and Service Operators including formalised technical training.

Qualifications

Skills are typically acquired through successful completion of high school or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
At least 2 years of experience as a Service Specialist-L&P, II.
An entry presentation covering Technical and HSEQ topics is part of the qualification process.
Licensure to drive commercial equipment may be required.
Successful completion of Well Control Accreditation Program or similar may be required (optional).
Successful completion of water survival training may be required.
Coordinates, directs and performs complex, hazardous and/or high profile jobs if required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
The ability to perform basic mathematical calculations involving addition, subtraction, multiplication, and division is required.
Basic reading comprehension and writing skills are required.
Basic computer skills are required.
Must be knowledgeable on HMS standards and guidelines for PSL personnel.
Proactively promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations, acting as a role model to less senior personnel.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in quality improvement processes.
May act as Service Leader in their absence.

Location

15 Marriott Road, Perth, Western Australia, 6164, Australia

Job Details

Requisition Number: 201092
Experience Level: Experienced Hire
Job Family: Operations
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician (Mumbai, MH, IN, 400057)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.
A high school diploma or equivalent and one year of experience in a mechanical field is required. A technical school certificate is preferred.

Qualifications

Location

Santa Janabai Road, Mumbai, Monaghan, 400057, India

Job Details

Requisition Number: 199687
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Hardware Engineer (Rio de Janeiro, RJ, BR, 291941)

Job Duties

Position Summary

Responsible for designing, testing, and integrating analog and digital PCBs toward the development of a Halliburton wireline tool;
He/She will work closely with the Engineering team, Scientists, and the Project Manager at the Halliburton Technology Center in Brazil (HBTC).
He/She will collaborate with Halliburton development teams based in the US and Singapore.

Qualification

Bachelor’s degree in Electrical/Electronics Engineering, or similar areas with sufficient experience.
A Master’s or Ph.D. degree is desired.

Experience

Experience with complex embedded systems development for harsh environments (oil & gas, aerospace, defense applications, etc.). including hardware modeling, simulation, design, and testing.
Design and analysis of analog and digital electronic systems (passive and active analog filters, power amplifiers, A/D and D/A converters, memory access/control, communication protocols, etc.).
Develop PCB designs using CAD tools (PADS, Altium Designer, etc.)
Well-versed in utilizing circuit simulators (LTSPICE, PSPICE, etc.)
Experience with laboratory measurement systems (oscilloscopes, electronic loads, impedance and network analyzers, etc.).
Experience with LabVIEW/MATLAB programming to control laboratory systems (data acquisition systems, signal generators, power supplies, signal conditioning systems, etc.).
Ability to innovate, self-motivated, with a strong sense of ownership, strong teamwork, and adaptability
Experience in R&D is desired.
Fluent in English.

Qualifications

Location

Rua Paulo Emidio Barbosa 485 Q, Rio de Janeiro, Rio de Janeiro, 291941, Brazil

Job Details

Requisition Number: 199327
Experience Level: Experienced Hire
Job Family: Engineering/Science/Technology
Product Service Line: Wireline and Perforating
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanical Assembler (Associate - Senior) (Duncan, OK, US, 73533)

Job Duties

Working under general supervision, performs a variety of assembly operations associated with the manufacturing of explosive products, small mechanical or electro-mechanical parts, or equipment housing or large equipment such as engines, engine and PTO drive trains, gas compressors, control equipment, covers/cowlings, related connecting lines, etc.
Assembly process may include fitting, mounting, alignment, adjusting, and operational testing.

Qualifications

Skills typically acquired through 1-2 years of related assembly experience.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Associate Mechanical Assembler, Mechanical Assembler, or Senior Mechanical Assembler.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program

Location

100 E Halliburton, Duncan, Oklahoma, 73533, United States

Job Details

Requisition Number: 199323
Experience Level: Experienced Hire
Job Family: Manufacturing & Supply Chain
Product Service Line: Supply Chain Mgmt
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Senior Accountant (Bengaluru, KA, IN, 560103)

Job Duties

Under general supervision, applies knowledge of the company&aposs business systems, business processes and controls, including policies and procedures, relative to the location and department assigned. Demonstrates understanding of organizational structure and core businesses of the company and industry. Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input. Prepares and posts journal vouchers for complex accounting transactions. Reviews and monitors financial transactions for accuracy and timeliness. Researches and resolves complex accounting issues and transactions including related internal controls. Prepares, analyzes, and distributes financial results including variance explanations. Participates in multi-functional teams and develops project management skills. Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen. Minimum of three (3) years of experience in accounting related roles required. Requires completion of an undergraduate degree in accounting, business, or related field. Knowledge of US GAAP or country-specific accounting principles required.

Qualifications

Location

4th Floor, Gardenia 2D, Bengaluru, , 560103,

Job Details

Requisition Number: 200011
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Mechanic Technician (I-III) - Maintenance (Duncan, OK, US, 73536)

Job Duties

Under general supervision, performs preventive/predictive maintenance, diagnostics, and repairs a variety of mechanical equipment relative to their assigned location.
Performs function testing to verify equipment readiness after maintenance.
Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.
Ensures adherence to and accurate maintenance of, as well as input of, data into Halliburton's system of record.
This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.
Performs own work and assists others as directed.
Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.

Qualifications

A high school diploma or equivalent and one year of experience in a mechanical field is required.
Preferred Qualifications include an A.S. degree or Certificate in Diesel Technology with previous experience as a mechanic working with heavy duty equipment.
Basic set of hand tools is required.

Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available Mechanic Technician I, Mechanic Technician II, Mechanic Technician III.

World Class Benefits

Medical, dental, vision, coverage in additional to life and disability insurance plans
Paid Vacation Days, Paid Holidays and the ability to purchase additional days off
Retirement and Savings (401K) Plan with matching contribution
Family Care program including paid time off to care for sick or injured immediate family members, adoption reimbursement, paternal and maternal leave for baby bonding and more.
Employee Job Referral Bonus Program
Employee Stock Purchase Program
Educational Assistance

Location

215 East Bois D'Arc, Duncan, Oklahoma, 73536, United States

Job Details

Requisition Number: 199315
Experience Level: Experienced Hire
Job Family: Support Services
Product Service Line: Maintenance PSL
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.

Accountant, Sr - A017-ESG-Accountant, Sr (Bucurest, B, RO, 013686)

Job Duties

Under general supervision, applies knowledge of the company's business systems, business processes and controls, including policies and procedures, relative to the location and department assigned.
Demonstrates understanding of organizational structure and core businesses of the company and industry.
Performs activities involving complex accounting reports and accounting analyses with related spreadsheets and applications input.
Prepares and posts journal vouchers for complex accounting transactions.
Reviews and monitors financial transactions for accuracy and timeliness.
Researches and resolves complex accounting issues and transactions including related internal controls.
Prepares, analyzes, and distributes financial results including variance explanations.
Participates in multi-functional teams and develops project management skills.
Demonstrates knowledge in moderately complex aspects of general accounting, internal controls, company policy, financial analysis and reporting, forecasting, and financial applications, as well as intermediate levels of proficiency with industry and company acumen.
Minimum of three (3) years of experience in accounting related roles required.
Requires completion of an undergraduate degree in accounting, business, or related field.
Knowledge of US GAAP or country-specific accounting principles required.

Qualifications

Location

Bucuresti-Ploiesti No. 172-176, Bucurest, Bucharest, 013686, Romania

Job Details

Requisition Number: 200563
Experience Level: Entry-Level
Job Family: Support Services
Product Service Line: Finance
Full Time / Part Time: Full Time

Additional Locations for this position:

Compensation Information
Compensation is competitive and commensurate with experience.